Publikationsliste für
Hansjörg Kapeller
als Autorin / Autor bzw. wesentlich beteiligte Person

60 Datensätze (2004 - 2019)

In der nachstehenden Liste werden Präsentationen mit Tagungsband doppelt - als Druckpublikation und als Präsentation - ausgegeben. Die Gesamtanzahl der unten aufgelisteten Datensätze ist daher im Allgemeinen größer als die oben angeführte Anzahl.


Artikel in wissenschaftlichen Zeitschriften

9 Datensätze:
  1. C. Grabner, J. Gragger, H. Kapeller, A. Haumer, C. Kral:
    "Design Guidelines for Sensorless PM-Drives";
    IAENG Engineering Letters, 17 (2009), 27; S. #.

    Zusätzliche Informationen

  2. C. Jungreuthmayer, T. Bäuml, O. Winter, M. Ganchev, H. Kapeller, A. Haumer, C. Kral:
    "A Detailed Heat and Fluid Flow Analysis of an Internal Permanent Magnet Synchronous Machine by Means of Computational Fluid Dynamics";
    IEEE Transactions on Industrial Electronics, Vol. 59, No. 12, December 2012 (2012), 0278-0046; S. 4568 - 4578.

    Zusätzliche Informationen

  3. H. Kapeller, B. Plassnegger, J. Gragger:
    "Iron-Loss Modelling based on a Loss-Separation Approach in Modelica";
    IEEE Transactions on Magnetics, Issue: 3 / Volume: 54 (2018), S. 1 - 4.

  4. C. Kral, A. Haumer, M. Haigis, H. Lang, H. Kapeller:
    "Comparison of a CFD Analysis and a Thermal Equivalent Circuit Model of a TEFC Induction Machine with Measurements";
    IEEE Transactions on Energy Conversion, 24 (2009), TEC-00030-2008; S. 809 - 818.

    Zusätzliche Informationen

  5. C. Kral, A. Haumer, H. Kapeller, G. Pascoli:
    "Modeling and Simulation of a Large Chipper Drive";
    The Open Electrical & Electronic Engineering Journal, 17 (2009), 27; S. 21 - 28.

    Zusätzliche Informationen

  6. C. Kral, A. Haumer, H. Kapeller, F. Pirker:
    "Design and Thermal Simulation of Induction Machines for Traction in Electric and Hybrid Electric Vehicles";
    WEVA Journal - The World Electric Vehicle Association Journal, 1/2007 (2007), 1.

  7. C. Kral, H. Kapeller, J. Gragger, A. Haumer, B. Kubicek:
    "Phenomenon Rotor Fault-Multiple Electrical Rotor Asymmetries in Induction Machines";
    IEEE Transaction on Power Electronics, 25 (2010), 5; S. 1124 - 1134.

    Zusätzliche Informationen

  8. C. Kral, H. Kapeller, F. Pirker:
    "A Stator and Rotor Fault Detection Technique for Induction Machines in Traction Applications of Electric or Hybrid Electric Vehicles";
    WEVA Journal - The World Electric Vehicle Association Journal, 01/2007 (2007), Vol. 1; 184 S.

  9. C. Kral, F. Pirker, G. Pascoli, H. Kapeller:
    "Robust Rotor Fault Detection by Means of the Vienna Monitoring Method and a Parameter Tracking Technique";
    IEEE Transactions on Industrial Electronics, Vol. 55 (2008), No. 12; S. 4229 - 4237.


Artikel in technischen Zeitschriften

1 Datensatz:
  1. M. Ganchev, H. Umschaden, H. Kapeller:
    "Sistema de medição da temperatura de rotores";
    Electricidade Mederna, x/445/x (2011), S. 140 - 145.

    Zusätzliche Informationen


Buchbeiträge

2 Datensätze:
  1. C. Grabner, J. Gragger, H. Kapeller, A. Haumer, C. Kral:
    "Sensorless PM-Drive Aspects";
    in: "Lecture Notes in Eletrical Engineering, Vol. 60", Springer Verlag (Hrg.); Springer Verlag, Berlin, Heidelberg, New York, 2010, ISBN: 978-90-481-8775-1, S. 25 - 35.

    Zusätzliche Informationen

  2. H. Kapeller, A. Haumer, C. Kral, C. Grabner:
    "Different Designs of Large Chipper Drives";
    in: "Lecture Notes in Eletrical Engineering, Vol. 60", Springer Verlag, Dordrecht, Heidelberg, London, New York, 2010, S. 93 - 104.

    Zusätzliche Informationen


Beiträge in Tagungsbänden

32 Datensätze:
  1. T. Bäuml, A. Haumer, H. Kapeller, J. Starzinger, P. Farzi:
    "Impact of Inverter Pulse Inhibition on the High-Voltage Supply System of an Electric Vehicle - A Simulative Approach";
    Poster: The 7th IEEE Vehicle Power and Propulsion Conference (IEEE VPPC 2011), Chicago; 06.09.2011 - 09.09.2011; in: "7th IEEE Vehicle Power and Propulsion Conference 2011", (2011), Paper-Nr. VP-0260.

    Zusätzliche Informationen

  2. T. Bäuml, C. Kral, A. Haumer, H. Kapeller:
    "Enhanced Thermal Model of a Totally Enclosed Fan Cooled Squirrel Cage Induction Machine";
    Vortrag: IEEE International Electric Machines and Drives Conference, IEMDC'07, Antalya; 03.05.2007 - 05.05.2007; in: "Proceedings IEEE International Electric Machines and Drive Conference", (2007), S. 1054 - 1058.

  3. T. Bäuml, C. Kral, A. Haumer, H. Kapeller, H. Neudorfer:
    "Thermal Design, Simulations and Measurements of a High Performance Double Air Cooled Traction Machine";
    Vortrag: 3rd International Conference on Railway Traction Systems, Tokyo, Japan; 12.11.2007 - 16.11.2007; in: "Proceedings of the 3rd International Conference on Railway Traction Systems", (2007).

  4. D. Dvorak, T. Bäuml, H. Kapeller, D. Simic:
    "Developing, Modeling and Validating Multi Physics Battery Models";
    Vortrag: 16. ITI Symposium, Dresden, Deutschland; 12.11.2013 - 13.11.2013; in: "Conference Proceedings of the 16th ITI Symposium", ITI GmbH Dresden, Deutschland, (2013), S. 146 - 152.

  5. D. Dvorak, S. Chaker, T. Bäuml, T. Hofmann, H. Kapeller, A. Abel:
    "Hybrid energy storages for electric vehicles";
    Vortrag: SAE WCX World Congress Experience, Detroit, Michigan, USA; 10.04.2018 - 12.04.2018; in: "SAE", SAE, (2018), Paper-Nr. 18PFL-0779.

  6. D. Dvorak, H. Kapeller, T. Bäuml, C. Niklas, D. Simic:
    "Validation of Electric Energy Storages Library based on Battery Measurements";
    Vortrag: FISITA World Automotive Congress, Maastricht, Niederlande; 02.06.2014 - 06.06.2014; in: "FISITA 2014 Proceedings", F2014-EDU-002, (2014), S. 1.

  7. D. Dvorak, H. Popp, T. Bäuml, D. Simic, H. Kapeller:
    "Arrhenius-Equation Based Approach for Modelling Lithium-Ion Battery Aging Effects";
    Vortrag: 17. ITI Symposium, Dresden, Deutschland; 03.11.2014 - 05.11.2014; in: "17th ITI Symposium", ITI GmbH, Dresden, Deutschland, (2014), S. 223 - 229.

  8. M. Ganchev, B. Kubicek, H. Kapeller:
    "Rotor Temprerature Monitoring System";
    Vortrag: ICEM2010, Rom; 06.09.2010 - 08.09.2010; in: "ICEM, 2010 XIX International Conference on Electrical Machines", (2010), ISBN: 978-1-4244-4174-7; 6 S.

    Zusätzliche Informationen

  9. M. Ganchev, H. Umschaden, H. Kapeller:
    "Rotor Temperature Distribution Measuring System";
    Vortrag: 37th Annual Conference of the IEEE Industrial Electronics Society (IECON 2011), Melbourne, Australien; 07.11.2011 - 10.11.2011; in: "Proceedings of IECON 2011 - 37th Annual Conference on IEEE Industrial Electronics Society", (2011), ISBN: 978-1-61284-969-0; 5 S.

    Zusätzliche Informationen

  10. H. Giuliani, C.-J. Fenz, A. Haumer, H. Kapeller:
    "Simulation and Validation of Power Losses in the Buck-Converter Model included in the SmartElectricDrives Library";
    Vortrag: 6th International Modelica Conference, Bielefeld; 03.03.2008 - 04.03.2008; in: "6th International Modelica Conference, Conference Proceedings", The Modelica Association, Fachhochschule Bielefeld, 1 (2008), S. 369 - 374.

  11. C. Grabner, J. Gragger, H. Kapeller, A. Haumer, C. Kral:
    "Sensorless Permanent Magnet Drive Design";
    Vortrag: World Congress on Engineering, WCE, London, U.K; 01.07.2009 - 03.07.2009; in: "Proceedings of the World Congress on Engineering 2009 Vol I", Newswood Limited, International Association of Engineers, Volume I (2009), ISBN: 978-988-17012-5-1; 6 S.

    Zusätzliche Informationen

  12. J. Gragger, H. Giuliani, C. Kral, T. Bäuml, H. Kapeller, F. Pirker:
    "The SmartElectricDrives Library - Powerful Models for Fast Simulations of Electric Drives";
    Vortrag: 5th International Modelica Conference, Wien, Österreich; 04.09.2006 - 05.09.2006; in: "5th International Modelica Conference", -, - (2006), S. 571 - 577.

  13. A. Haumer, C. Kral, J. Gragger, H. Kapeller:
    "Quasi-Stationary Modeling and Simulation of Electrical Circuits using Complex Phasors";
    Vortrag: 6th International Modelica Conference, Bielefeld; 03.03.2008 - 04.03.2008; in: "6th International Modelica Conference, Conference Proceedings", The Modelica Association, Fachhochschule Bielefeld, (2008), S. 229 - 236.

  14. A. Haumer, C. Kral, H. Kapeller, T. Bäuml, J. Gragger:
    "The AdvancedMachines Library: Loss Models for Electric Machines";
    Vortrag: 7th International Modelica Conference (Modelica 2009), Como, Italien; 20.09.2009 - 22.09.2009; in: "Proceedings of the 7th International Modelica Conference", Modelica Association, (2009), ISBN: 978-91-7393--513-5; Paper-Nr. 103.

    Zusätzliche Informationen

  15. C. Jungreuthmayer, T. Bäuml, O. Winter, M. Ganchev, H. Kapeller, A. Haumer, C. Kral:
    "Heat and Fluid Flow Analysis of an Internal Permanent Magnet Synchronous Machine by Means of Computational Fluid Dynamics";
    Vortrag: IEEE Electric Machines & Drives Conference (IEMDC), Niagara Falls; 15.05.2011 - 18.05.2011; in: "IEEE International Electric Machines & Drives Conference (IEMDC)", IEEE, (2011), ISBN: 978-1-4577-0060-6; S. 515 - 520.

    Zusätzliche Informationen

  16. H. Kapeller, D. Dvorak, J. Gragger, F. Müllner, H. Neudorfer:
    "Modeling of Iron Losses in an Induction Machine based on a Magnetic Equivalent Circuit in Modelica";
    Vortrag: IEMDC 2017 - IEEE International Electric Machines & Drives Conference, Miami, USA; 21.05.2017 - 24.05.2017; in: "Ieee Iemdc 2017", IEMDC 2017, Miami, FL, USA, (2017), Paper-Nr. ID 160.

    Zusätzliche Informationen

  17. H. Kapeller, H. Giuliani, F. Pirker:
    "Smart Control Parameter setting for the Simulation of Electric Drive Systems";
    Vortrag: 6th EUROSIM Congress 2007, Ljubljana, Slowenien; 09.09.2007 - 13.09.2007; in: "Proceedings of the 6th EUROSIM Congress 2007", (2007).

  18. H. Kapeller, A. Haumer, C. Kral, C. Grabner:
    "Investigation of the Operational Bahavior of a Large Chipper Drive";
    Vortrag: World Congress of Engineering (WCE 2009), London, UK; 01.07.2009 - 03.07.2009; in: "Lecture Notes in Engineering and Computer Science, WCE 2009, World Congress of Engineering 2009", International Society of Engineers, (2009), ISBN: 978-988-17012-5-1; Paper-Nr. 58, 6 S.

    Zusätzliche Informationen

  19. H. Kapeller, A. Haumer, C. Kral, G. Pascoli, F. Pirker:
    "Modeling and Simulation of a Large Chipper Drive";
    Vortrag: 6th International Modelica Conference, Bielefeld; 03.03.2008 - 04.03.2008; in: "6th International Modelica Conference, Conference Proceedings", The Modelica Association, Fachhochschule Bielefeld, 1 (2008), S. 361 - 367.

  20. H. Kapeller, A. Haumer, C. Kral, F. Pirker, G. Pascoli:
    "Identification and Controls of Electrically Excited Synchronous Machines";
    Vortrag: 5th International Modelica Conference, Wien, Österreich; 04.09.2006 - 05.09.2006; in: "5th International Modelica Conference", -, - (2006), S. #.

  21. H. Kapeller, B. Plassnegger, J. Gragger, F. Müllner, H. Neudorfer:
    "Iron-Loss Modelling based on a Loss-Separation Approach in Modelica";
    Vortrag: Compumag 2017 - 21st International Conference on the Computation of Electromagnetic Fields, Daejeon, South Korea; 18.06.2017 - 22.06.2017; in: "Compumag 2017_DIGESTS", Compumag 2017, Daejeon, South Korea, [OD1-5] Contribution 13 (2017).

  22. H. Kapeller, D. Simic:
    "Feedback Loop Optimization for a Distillation System by applying C-Code Controllers with Dymola";
    Vortrag: 7th International Modelica Conference (Modelica 2009), Como, Italien; 20.09.2009 - 22.09.2009; in: "Proceedings of the 7th International Modelica Conference", Modelica Association, (2009), ISBN: 978-91-7393--513-5; Paper-Nr. 54.

    Zusätzliche Informationen

  23. C. Kral, A. Haumer, M. Haigis, H. Lang, H. Kapeller:
    "Comparison of Measurements with a CFD Analysis and a Thermal Equivalent Circuit Model of TEFC Induction Machine";
    Vortrag: XVII International Conference on Electrical Machines ICEM 2006, Crete Island, Greece; 02.09.2006 - 05.09.2006; in: "XVII International Conference on Electrical Machines ICEM 2006", -, - (2006), S. #.

  24. C. Kral, A. Haumer, H. Kapeller, F. Pirker:
    "DESIGN AND THERMAL SIMULATION OF INDUCTION MACHINES FOR TRACTION IN ELECTRIC AND HYRID ELECTRIC VEHICLES";
    Vortrag: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22, Yokohama, Japan; 23.10.2006 - 28.10.2006; in: "22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22", -, - (2006), S. #.

  25. C. Kral, H. Kapeller, J. Gragger, A. Haumer, B. Kubicek:
    "Phenomenon Rotor Fault - Multiple Electrical Rotor Asymmetries in Induction Machines";
    Vortrag: SDEMPED 7th IEEE International Symosium on Diagnostics for Electric Machines, Power Electronics and Drives, Cargese, France; 31.08.2009 - 03.09.2009; in: "Conference Record of the 7th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives", IEEE, TD0063 (2009), Paper-Nr. TD0063.

  26. C. Kral, H. Kapeller, J. Gragger, A. Haumer, B. Kubicek:
    "Phenomenon Rotor Fault - Multiple Electrical Rotor Asymmetries in Induction Machines";
    Vortrag: SDEMPED 7th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Cargese, Frankreich; 31.08.2009 - 03.09.2009; in: "Conference Record of the 7th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives", IEEE, (2009), Paper-Nr. TD0063.

  27. C. Kral, H. Kapeller, F. Pirker:
    "A STATOR AND ROTOR FAULT DETECTION TECHNIIQUE FOR INDUCTION MACHINES IN TRACTION APPLICATIONS OF ELECTRIC OR HYBRID ELECTRIC VEHICLES";
    Vortrag: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22, Yokohama, Japan; 23.10.2006 - 28.10.2006; in: "22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22", -, - (2006), S. #.

  28. H. Lang, M. Haigis, C. Kral, A. Haumer, H. Kapeller, H. Neudorfer, F. Dangl, W. Sollinger:
    "Thermal Investigation of Rotating Electrical Machinery";
    Vortrag: NAFEMS World Conference, Vancouver; Kanada; 22.05.2007 - 25.05.2007; in: "Proceedings of the NAFEMS World Conference", (2007).

  29. H. Neudorfer, F. Dangl, M. Dallinger, W. Sollinger, H. Lang, H. Kapeller, C. Kral, T. Bäuml:
    "Entwicklung und messtechnische Verifizierung eines Traktionsgenerators in der Leistungsklasse von 1,2 MW";
    Vortrag: ETG Kongress des VDE, Kundennutzen durch neue Technologien in der Bahntechnik, Karlsruhe, Deutschland; 23.10.2007 - 24.10.2007; in: "Proceedings des ETG Kongress des VDE, Kundennutzen durch neue Technologien in der Bahntechnik", (2007).

  30. U. Reisenbichler, H. Kapeller, A. Haumer, C. Kral, F. Pirker, G. Pascoli:
    "If we only had used XML ...";
    Vortrag: 5th International Modelica Conference, Wien, Österreich; 04.09.2006 - 05.09.2006; in: "5th International Modelica Conference", -, - (2006), S. #.

  31. D. Simic, D. Dvorak, T. Bäuml, H. Kapeller:
    "Modeling and Evaluation of the SmartCooling (SC) Library for the Simulation of the Thermal Management in Automotive Applications";
    Hauptvortrag: European Wolfram Technology Conference 2014, Frankfurt; 26.05.2014 - 28.05.2014; in: "http://www.wolfram.com/events/technology-conference-eu/2014/", (2014).

  32. D. Simic, A. Frohner, D. Dvorak, T. Bäuml, H. Kapeller:
    "From Modelling and Simulation to Future Efficient E-Mobility Concepts";
    Vortrag: 10th SDEWES 2015, Dubrovnik, Croatia; 28.09.2015 - 02.10.2015; in: "10th SDEWES 2015", (2015).


Vorträge und Posterpräsentationen auf Tagungen

46 Datensätze:
  1. T. Bäuml, A. Haumer, H. Kapeller, J. Starzinger, P. Farzi:
    "Impact of Inverter Pulse Inhibition on the High-Voltage Supply System of an Electric Vehicle - A Simulative Approach";
    Poster: The 7th IEEE Vehicle Power and Propulsion Conference (IEEE VPPC 2011), Chicago; 06.09.2011 - 09.09.2011; in: "7th IEEE Vehicle Power and Propulsion Conference 2011", (2011), Paper-Nr. VP-0260.

    Zusätzliche Informationen

  2. T. Bäuml, C. Kral, A. Haumer, H. Kapeller:
    "Enhanced Thermal Model of a Totally Enclosed Fan Cooled Squirrel Cage Induction Machine";
    Vortrag: IEEE International Electric Machines and Drives Conference, IEMDC'07, Antalya; 03.05.2007 - 05.05.2007; in: "Proceedings IEEE International Electric Machines and Drive Conference", (2007), S. 1054 - 1058.

  3. T. Bäuml, C. Kral, A. Haumer, H. Kapeller, H. Neudorfer:
    "Thermal Design, Simulations and Measurements of a High Performance Double Air Cooled Traction Machine";
    Vortrag: 3rd International Conference on Railway Traction Systems, Tokyo, Japan; 12.11.2007 - 16.11.2007; in: "Proceedings of the 3rd International Conference on Railway Traction Systems", (2007).

  4. D. Dvorak, T. Bäuml, H. Kapeller, D. Simic:
    "Developing, Modeling and Validating Multi Physics Battery Models";
    Vortrag: 16. ITI Symposium, Dresden, Deutschland; 12.11.2013 - 13.11.2013; in: "Conference Proceedings of the 16th ITI Symposium", ITI GmbH Dresden, Deutschland, (2013), S. 146 - 152.

  5. D. Dvorak, S. Chaker, T. Bäuml, T. Hofmann, H. Kapeller, A. Abel:
    "Hybrid energy storages for electric vehicles";
    Vortrag: SAE WCX World Congress Experience, Detroit, Michigan, USA; 10.04.2018 - 12.04.2018; in: "SAE", SAE, (2018), Paper-Nr. 18PFL-0779.

  6. D. Dvorak, H. Kapeller:
    "Increasing the share of electric vehicles on the market by using thermal recuperation strategies";
    Vortrag: Automotive Thermal Recuperation Conference, Berlin; 24.04.2017 - 26.04.2017.

  7. D. Dvorak, H. Kapeller:
    "Perspectives of thermal recuperation for fuel-cell vehicles";
    Poster: ModVal2018, Aarau, Schweiz; 12.04.2018 - 13.04.2018.

  8. D. Dvorak, H. Kapeller, T. Bäuml, C. Niklas, D. Simic:
    "Validation of Electric Energy Storages Library based on Battery Measurements";
    Vortrag: FISITA World Automotive Congress, Maastricht, Niederlande; 02.06.2014 - 06.06.2014; in: "FISITA 2014 Proceedings", F2014-EDU-002, (2014), S. 1.

  9. D. Dvorak, H. Popp, T. Bäuml, D. Simic, H. Kapeller:
    "Arrhenius-Equation Based Approach for Modelling Lithium-Ion Battery Aging Effects";
    Vortrag: 17. ITI Symposium, Dresden, Deutschland; 03.11.2014 - 05.11.2014; in: "17th ITI Symposium", ITI GmbH, Dresden, Deutschland, (2014), S. 223 - 229.

  10. D. Dvorak, H. Popp, H. Kapeller:
    "The Electric Energy Storages Library";
    Vortrag: e-Monday, München (eingeladen); 22.09.2014 - 23.09.2014.

  11. D. Dvorak, D. Simic, T. Bäuml, H. Kapeller:
    "Integrated Modeling Approach of an Electric Vehicle HV-Battery for Optimizing the Energy Consumption";
    Hauptvortrag: European Wolfram Technology Conference 2014, Frankfurt; 26.05.2014 - 28.05.2014.

  12. M. Ganchev, B. Kubicek, H. Kapeller:
    "Rotor Temprerature Monitoring System";
    Vortrag: ICEM2010, Rom; 06.09.2010 - 08.09.2010; in: "ICEM, 2010 XIX International Conference on Electrical Machines", (2010), ISBN: 978-1-4244-4174-7; 6 S.

    Zusätzliche Informationen

  13. M. Ganchev, H. Umschaden, H. Kapeller:
    "Rotor Temperature Distribution Measuring System";
    Vortrag: 37th Annual Conference of the IEEE Industrial Electronics Society (IECON 2011), Melbourne, Australien; 07.11.2011 - 10.11.2011; in: "Proceedings of IECON 2011 - 37th Annual Conference on IEEE Industrial Electronics Society", (2011), ISBN: 978-1-61284-969-0; 5 S.

    Zusätzliche Informationen

  14. H. Giuliani, C.-J. Fenz, A. Haumer, H. Kapeller:
    "Simulation and Validation of Power Losses in the Buck-Converter Model included in the SmartElectricDrives Library";
    Vortrag: 6th International Modelica Conference, Bielefeld; 03.03.2008 - 04.03.2008; in: "6th International Modelica Conference, Conference Proceedings", The Modelica Association, Fachhochschule Bielefeld, 1 (2008), S. 369 - 374.

  15. C. Grabner, J. Gragger, H. Kapeller, A. Haumer, C. Kral:
    "Sensorless Permanent Magnet Drive Design";
    Vortrag: World Congress on Engineering, WCE, London, U.K; 01.07.2009 - 03.07.2009; in: "Proceedings of the World Congress on Engineering 2009 Vol I", Newswood Limited, International Association of Engineers, Volume I (2009), ISBN: 978-988-17012-5-1; 6 S.

    Zusätzliche Informationen

  16. J. Gragger, H. Giuliani, C. Kral, T. Bäuml, H. Kapeller, F. Pirker:
    "The SmartElectricDrives Library - Powerful Models for Fast Simulations of Electric Drives";
    Vortrag: 5th International Modelica Conference, Wien, Österreich; 04.09.2006 - 05.09.2006; in: "5th International Modelica Conference", -, - (2006), S. 571 - 577.

  17. A. Haumer, C. Kral, J. Gragger, H. Kapeller:
    "Quasi-Stationary Modeling and Simulation of Electrical Circuits using Complex Phasors";
    Vortrag: 6th International Modelica Conference, Bielefeld; 03.03.2008 - 04.03.2008; in: "6th International Modelica Conference, Conference Proceedings", The Modelica Association, Fachhochschule Bielefeld, (2008), S. 229 - 236.

  18. A. Haumer, C. Kral, H. Kapeller, T. Bäuml, J. Gragger:
    "The AdvancedMachines Library: Loss Models for Electric Machines";
    Vortrag: 7th International Modelica Conference (Modelica 2009), Como, Italien; 20.09.2009 - 22.09.2009; in: "Proceedings of the 7th International Modelica Conference", Modelica Association, (2009), ISBN: 978-91-7393--513-5; Paper-Nr. 103.

    Zusätzliche Informationen

  19. C. Jungreuthmayer, T. Bäuml, O. Winter, M. Ganchev, H. Kapeller, A. Haumer, C. Kral:
    "Heat and Fluid Flow Analysis of an Internal Permanent Magnet Synchronous Machine by Means of Computational Fluid Dynamics";
    Vortrag: IEEE Electric Machines & Drives Conference (IEMDC), Niagara Falls; 15.05.2011 - 18.05.2011; in: "IEEE International Electric Machines & Drives Conference (IEMDC)", IEEE, (2011), ISBN: 978-1-4577-0060-6; S. 515 - 520.

    Zusätzliche Informationen

  20. H. Kapeller:
    "SmartBatt - Smart and Safe Integration of Batteries in Electric Vehicles";
    Poster: InnoBATT 2014, Graz; 09.04.2014 - 10.04.2014.

  21. H. Kapeller:
    "SmartBatt / Multifunktionales und sicheres Leichtbaugehäuse für Batteriesysteme als vollständig integriertes Strukturelement der Fahrzeugkarosserie";
    Vortrag: International Symposium on E-Mobility & Energy Management, Wien; 22.05.2014 - 23.05.2014.

  22. H. Kapeller:
    "XML-Datenschnittstellen für Simulations- und Berechnungsprogramme";
    Vortrag: ASIM/GI Fachgruppentagung, München, Deutschland; 04/2006.

  23. H. Kapeller, D. Dvorak, J. Gragger, F. Müllner, H. Neudorfer:
    "Modeling of Iron Losses in an Induction Machine based on a Magnetic Equivalent Circuit in Modelica";
    Vortrag: IEMDC 2017 - IEEE International Electric Machines & Drives Conference, Miami, USA; 21.05.2017 - 24.05.2017; in: "Ieee Iemdc 2017", IEMDC 2017, Miami, FL, USA, (2017), Paper-Nr. ID 160.

    Zusätzliche Informationen

  24. H. Kapeller, H. Giuliani, F. Pirker:
    "Smart Control Parameter setting for the Simulation of Electric Drive Systems";
    Vortrag: 6th EUROSIM Congress 2007, Ljubljana, Slowenien; 09.09.2007 - 13.09.2007; in: "Proceedings of the 6th EUROSIM Congress 2007", (2007).

  25. H. Kapeller, A. Haumer, C. Kral, C. Grabner:
    "Investigation of the Operational Bahavior of a Large Chipper Drive";
    Vortrag: World Congress of Engineering (WCE 2009), London, UK; 01.07.2009 - 03.07.2009; in: "Lecture Notes in Engineering and Computer Science, WCE 2009, World Congress of Engineering 2009", International Society of Engineers, (2009), ISBN: 978-988-17012-5-1; Paper-Nr. 58, 6 S.

    Zusätzliche Informationen

  26. H. Kapeller, A. Haumer, C. Kral, G. Pascoli, F. Pirker:
    "Modeling and Simulation of a Large Chipper Drive";
    Vortrag: 6th International Modelica Conference, Bielefeld; 03.03.2008 - 04.03.2008; in: "6th International Modelica Conference, Conference Proceedings", The Modelica Association, Fachhochschule Bielefeld, 1 (2008), S. 361 - 367.

  27. H. Kapeller, A. Haumer, C. Kral, F. Pirker, G. Pascoli:
    "Identification and Controls of Electrically Excited Synchronous Machines";
    Vortrag: 5th International Modelica Conference, Wien, Österreich; 04.09.2006 - 05.09.2006; in: "5th International Modelica Conference", -, - (2006), S. #.

  28. H. Kapeller, C. Kral, F. Pirker, G. Pascoli:
    "Stator Winding Turn Fault Detection for Induction Machines";
    Vortrag: Sdemped 2005, Wien, Österreich; 07.09.2005 - 09.09.2005.

  29. H. Kapeller, B. Plassnegger, J. Gragger, F. Müllner, H. Neudorfer:
    "Iron-Loss Modelling based on a Loss-Separation Approach in Modelica";
    Vortrag: Compumag 2017 - 21st International Conference on the Computation of Electromagnetic Fields, Daejeon, South Korea; 18.06.2017 - 22.06.2017; in: "Compumag 2017_DIGESTS", Compumag 2017, Daejeon, South Korea, [OD1-5] Contribution 13 (2017).

  30. H. Kapeller, D. Simic:
    "Feedback Loop Optimization for a Distillation System by applying C-Code Controllers with Dymola";
    Vortrag: 7th International Modelica Conference (Modelica 2009), Como, Italien; 20.09.2009 - 22.09.2009; in: "Proceedings of the 7th International Modelica Conference", Modelica Association, (2009), ISBN: 978-91-7393--513-5; Paper-Nr. 54.

    Zusätzliche Informationen

  31. H. Kapeller, D. Simic:
    "Model-based design of an HVAC control strategy";
    Vortrag: SDEWES Konferenz 2019, Dubrovnik, Kroatien; 01.10.2019 - 06.10.2019.

  32. H. Kapeller, D. Simic, D. Dvorak, H. Umschaden:
    "The power of Mathematica visualizations: intuitively understanding technical correlations";
    Vortrag: Wolfram European Technology Tour 2016, Berlin; 08.06.2016.

  33. C. Kral, A. Haumer, M. Haigis, H. Lang, H. Kapeller:
    "Comparison of Measurements with a CFD Analysis and a Thermal Equivalent Circuit Model of TEFC Induction Machine";
    Vortrag: XVII International Conference on Electrical Machines ICEM 2006, Crete Island, Greece; 02.09.2006 - 05.09.2006; in: "XVII International Conference on Electrical Machines ICEM 2006", -, - (2006), S. #.

  34. C. Kral, A. Haumer, H. Kapeller, F. Pirker:
    "DESIGN AND THERMAL SIMULATION OF INDUCTION MACHINES FOR TRACTION IN ELECTRIC AND HYRID ELECTRIC VEHICLES";
    Vortrag: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22, Yokohama, Japan; 23.10.2006 - 28.10.2006; in: "22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22", -, - (2006), S. #.

  35. C. Kral, A. Haumer, H. Kapeller, F. Pirker, G. Pascoli:
    "Comparison of two rotor temperature estimation models of a surface cooled squirrel cage induction machine";
    Vortrag: IEMDC 2005, San Antonio, TX; 15.05.2005 - 18.05.2005.

  36. C. Kral, H. Kapeller, J. Gragger, A. Haumer, B. Kubicek:
    "Phenomenon Rotor Fault - Multiple Electrical Rotor Asymmetries in Induction Machines";
    Vortrag: SDEMPED 7th IEEE International Symosium on Diagnostics for Electric Machines, Power Electronics and Drives, Cargese, France; 31.08.2009 - 03.09.2009; in: "Conference Record of the 7th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives", IEEE, TD0063 (2009), Paper-Nr. TD0063.

  37. C. Kral, H. Kapeller, J. Gragger, A. Haumer, B. Kubicek:
    "Phenomenon Rotor Fault - Multiple Electrical Rotor Asymmetries in Induction Machines";
    Vortrag: SDEMPED 7th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Cargese, Frankreich; 31.08.2009 - 03.09.2009; in: "Conference Record of the 7th International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives", IEEE, (2009), Paper-Nr. TD0063.

  38. C. Kral, H. Kapeller, J. Gragger, F. Pirker, G. Pascoli:
    "Detection of mechanical imbalances during transient torque operating conditions";
    Vortrag: Sdemped 2005, Wien, Österreich; 07.09.2005 - 09.09.2005.

  39. C. Kral, H. Kapeller, F. Pirker:
    "A STATOR AND ROTOR FAULT DETECTION TECHNIIQUE FOR INDUCTION MACHINES IN TRACTION APPLICATIONS OF ELECTRIC OR HYBRID ELECTRIC VEHICLES";
    Vortrag: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22, Yokohama, Japan; 23.10.2006 - 28.10.2006; in: "22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exposition, EVS22", -, - (2006), S. #.

  40. C. Kral, H. Kapeller, F. Pirker, G. Pascoli:
    "Detection of rotor faults unter transient operating conditions by means of the Vienna Monitoring Method";
    Vortrag: Sdemped 2005, Wien, Österreich; 07.09.2005 - 09.09.2005.

  41. C. Kral, H. Kapeller, F. Pirker, G. Pascoli:
    "Discrimination of Rotor Faults and Low Frequency Load Torque Modulations of Squirrel Cage Induction Machines by means of the Vienna Monitoring Method";
    Vortrag: PESC/PEEW 2005, Recife, Brasilien; 13.06.2005 - 16.06.2005.

  42. H. Lang, M. Haigis, C. Kral, A. Haumer, H. Kapeller, H. Neudorfer, F. Dangl, W. Sollinger:
    "Thermal Investigation of Rotating Electrical Machinery";
    Vortrag: NAFEMS World Conference, Vancouver; Kanada; 22.05.2007 - 25.05.2007; in: "Proceedings of the NAFEMS World Conference", (2007).

  43. H. Neudorfer, F. Dangl, M. Dallinger, W. Sollinger, H. Lang, H. Kapeller, C. Kral, T. Bäuml:
    "Entwicklung und messtechnische Verifizierung eines Traktionsgenerators in der Leistungsklasse von 1,2 MW";
    Vortrag: ETG Kongress des VDE, Kundennutzen durch neue Technologien in der Bahntechnik, Karlsruhe, Deutschland; 23.10.2007 - 24.10.2007; in: "Proceedings des ETG Kongress des VDE, Kundennutzen durch neue Technologien in der Bahntechnik", (2007).

  44. U. Reisenbichler, H. Kapeller, A. Haumer, C. Kral, F. Pirker, G. Pascoli:
    "If we only had used XML ...";
    Vortrag: 5th International Modelica Conference, Wien, Österreich; 04.09.2006 - 05.09.2006; in: "5th International Modelica Conference", -, - (2006), S. #.

  45. D. Simic, D. Dvorak, T. Bäuml, H. Kapeller:
    "Modeling and Evaluation of the SmartCooling (SC) Library for the Simulation of the Thermal Management in Automotive Applications";
    Hauptvortrag: European Wolfram Technology Conference 2014, Frankfurt; 26.05.2014 - 28.05.2014; in: "http://www.wolfram.com/events/technology-conference-eu/2014/", (2014).

  46. D. Simic, A. Frohner, D. Dvorak, T. Bäuml, H. Kapeller:
    "From Modelling and Simulation to Future Efficient E-Mobility Concepts";
    Vortrag: 10th SDEWES 2015, Dubrovnik, Croatia; 28.09.2015 - 02.10.2015; in: "10th SDEWES 2015", (2015).


Diplomarbeiten und Masterthesen

1 Datensatz:
  1. H. Kapeller:
    "Messwerterfassung für Rapidprototypingsystem von Drehstromantrieben";
    Betreuer/in(nen): T. Wolbank, J. Machl; Technische Universität Wien, 2004; Abschlussprüfung: 2004.