AIT Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten von ARC (Publikationen aus 1976 - 2008) erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen des Centers" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank des AIT Austrian Institute of Technology!


Publikationsdatenbank Home  

Publikationsliste für Angehörige von
AMAT - Advanced Materials and Aerospace Technologies
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen

413 Datensätze (1976 - 2019)


Bücher und Buch-Herausgaben


  1. Autor/innen: Gernot Kronreif, ARC/MSBS; Martin Fürst, PROFA; W. Ptacek, AMAT; Martin Kornfeld, PROFA; J. Kettenbach, Abteilung für Angiop

    G. Kronreif, M. Fürst, W. Ptacek, M. Kornfeld, J. Kettenbach:
    "Robotic System for Image Guided Therapie - B-Rob II";
    Eigenverlag, Balatonfüred/HU, 2006, ISBN: 9637154485.

  2. Autor/innen: Christoph Steiger, AMAT; Ekkehard Jansenberger, W

    Ch. Steiger, E. Jansenberger:
    "Dateisystem für ein digitales Signalprozessorboard";
    Eigenverlag, Seibersdorf, 2001.

  3. Autor/innen: Christoph Steiger, AMAT; Patricia Jasek, W

    Ch. Steiger, P. Jasek:
    "Offline-Tool zur Signalanalyse mit Wavelets";
    Eigenverlag, Seibersdorf, 2001.

  4. Autor/innen: Christoph Steiger, AMAT; Josef Mandl, W

    Ch. Steiger, J. Mandl:
    "Das Lichtschnittverfahren zur Online-Qualitätskontrolle von Schweißnähten";
    Eigenverlag, Seibersdorf, 2001.


Zeitschriftenbeiträge


  1. Autor/innen: Alina Agüero, Inst. Nac de Tec. Ae; K. Spiradek-Hahn, ADG; Sabine Höfinger, AMAT; Manuel Gutierrez, Inasmet, Ceramics; R. Muelas, Inst. Nac. de. Tecn.

    A. Agüero, K. Spiradek-Hahn, S. Höfinger, M. Gutierrez, R. Muelas:
    "Microstructural Evolution of Slurry Fe Aluminide Coatings During High Temperature Steam Oxidation";
    Materials Science Forum, Vol 595-598 (2008), S. 251 - 259.

  2. Autor/innen: Paul Angerer, AMAT; Yu Li Gen, School of Mechanical; Khor Khiam Aik, School of Mechanical; Georg Krumpel, AMAT [(keine)]

    P. Angerer, Yu Li Gen, Khor Khiam Aik, G. Krumpel:
    "Spark-Plasma-Sintering (SPS) of nanostructured and submicron titanium Oxide powders";
    Materials Science and Engineering A, A 381 (2004), S. 16 - 19.

  3. Autor/innen: Atre Sundar, ARC; Jin Park Seong, ARC; Rudolf Zauner, AMAT; Randall German , ARC

    Atre Sundar, J. Park Seong, R. Zauner, R. German :
    "Process simulation of powder injection moulding: identification of significant parameters during mould filling phase";
    Powder Metallurgy, Vol. 50 (2007), No. 1; S. 76 - 85.

  4. Autor/innen: Rudolf Josef Beer, ARC; Josef Eberhardsteiner, ARC; J. Kodvanj, University of Zagreb; Walter Grienauer, AMAT; F. Gottsauner-Wolf, ARC; G. von Skrbensky, ARC

    R. Beer, J. Eberhardsteiner, J. Kodvanj, W. Grienauer, F. Gottsauner-Wolf, G. von Skrbensky:
    "Mechanical and medical aspects of an implant-bone connection in the femur: A three-dimensional photoelastic study of the load transfer mechanism using gamma radiation for fixing the experimental information. Comparison of two solutions of femur prosthesis";
    Acta of Bioengineering and Biomechanics, Vol.2 (2002), No.2; S. 7.

    Zusätzliche Informationen

  5. Autor/innen: S. Biamino; Volker Liedtke, AAC; C. Badini; Gerhard Euchberger, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; M. Pavese; P. Fino

    S. Biamino, V. Liedtke, C. Badini, G. Euchberger, Huertas Olivares Inmaculada, M. Pavese, P. Fino:
    "Multilayer SiC for thermal protection system of space vehicles: Manufacturing and testing under simulated re-entry conditions";
    Journal of the European Ceramic Society, vol. 28/14 (2008), S. 2791 - 2800.

  6. Autor/innen: Binet Chantal, ARC; Kristina Cowan, ARC; Donald Heaney, Center for Innovativ; Piemme Jobe, AMAT; Rudolf Zauner, AMAT

    Binet Chantal, K. Cowan, D. Heaney, Piemme Jobe, R. Zauner:
    "Variability of Powder Characteristics and their Effect on Dimensional Variability of Powder Injection Molded Components";
    Powder Metallurgy, Vol. 47 (2004), S. 145 - 150.

  7. Autor/innen: P. Braun, ALT; R. Dobrozemsky; Friedrich Rüdenauer, AMAT; H. Winter, ALT

    P. Braun, R. Dobrozemsky, F. Rüdenauer, H. Winter:
    "Vacuum special issue on the occasion of the 60th birthday of Franz P. Viehböck";
    Vacuum(Sep 1983), Vol. 33(9) (1983), S. 503 - 578.

  8. Autor/innen: P. Braun, ALT; F.P. Viehböck, ALT; Friedrich Rüdenauer, AMAT

    P. Braun, F.P. Viehböck, F. Rüdenauer:
    "Surface analysis using charged-particle beams";
    Adv. Electron. Electron Phys.(1981), Vol. 57, (1981), S. 231 - 310.

  9. Autor/innen: J.D. Brown, ALT; Friedrich Rüdenauer, AMAT

    J.D. Brown, F. Rüdenauer:
    "Use of electron beam techniques to study ion deposition in secondary ion mass spectrometry sputter craters";
    J. Appl. Phys.(15 Apr 1985), Vol. 57(8) (1985), S. 2727 - 2732.

  10. Autor/innen: Thomas Daxner, Technical University; Franz Rammerstorfer, ARC; Javier Segurado, AMAT; Heinz Pettermann, ARC

    T. Daxner, F. Rammerstorfer, J. Segurado, Heinz Pettermann:
    "Numerical Simulations of the Creep Deformation of MMC's in 4-Point Bending Mode";
    Journal of Engineering Materials and Technology, Vol. 125 (2002), S. 6.

    Zusätzliche Informationen

  11. Autor/innen: Boro Djuricic, ARC; Wolfgang Lacom, AMAT; Georg Krumpel, AMAT [(keine)]; Manfred Brabetz, AMAT

    B. Djuricic, W. Lacom, G. Krumpel, M. Brabetz:
    "Nanostructured Ceramic Materials - Tailoring of the Structures on the Scale of Atoms";
    IT'S T.I.M.E., (2003), No 2 (2002); S. 14 - 21.

  12. Autor/innen: Boro Djuricic, ARC; Wolfgang Lacom, AMAT; Georg Krumpel, AMAT [(keine)]; Manfred Brabetz, AMAT

    B. Djuricic, W. Lacom, G. Krumpel, M. Brabetz:
    "Nanostructured Ceramic Materials - Tailoring of the Structures on the Scale of Atoms";
    IT'S T.I.M.E., (2006), No 2 (2002); S. 14 - 21.

  13. Autor/innen: Jean-Marie Dubois , ARC; Pierre Brunet, ARC; Walter Constin, AMAT; Andreas Merstallinger, AAC

    Jean-Marie Dubois , P. Brunet, W. Constin, A. Merstallinger:
    "Friction and fretting on quasicrystals under vacuum";
    Journal of Non-Crystalline solids, Vol. 334-335 (2004), S. 475 - 480.

  14. Autor/innen: Michael Fehringer, W; Friedrich Rüdenauer, AMAT; Wolfgang Steiger, AMAT

    M. Fehringer, F. Rüdenauer, W. Steiger:
    "Indium Liquid-Metal Ion Sources as Micronewton Thrusters";
    Laser Interferometer Space Antenna, (1998), S. 207 - 213.

    Zusätzliche Informationen

  15. Autor/innen: Markus Fink, AMAT; Thomas Fabing, AMAT; Michael Scheerer, AAC; Ernst Semerad, AAC; B.D. Dunn, ALT

    M. Fink, T. Fabing, M. Scheerer, E. Semerad, B.D. Dunn:
    ""Measurement of mechanical properties of electronic materials at temperatures down to 4.2 K"";
    Cryogenics, vol. 48 (2008), S. 497 - 510.

  16. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA; Buldrini Nembo, AMAT; Wolfgang Steiger, AMAT

    A. Genovese, M. Tajmar, Buldrini Nembo, W. Steiger:
    "2000h Endurance Test of an Indium FEEP Microthruster Cluster";
    AIAA Journal of Propulsion and Power, Vol. 20 (2004), No. 2; S. 219 - 227.

  17. Autor/innen: H. Gnaser; J. Marton, Techn. Univ., Vienna; Friedrich Rüdenauer, AMAT; W. Steiger

    H. Gnaser, J. Marton, F. Rüdenauer, W. Steiger:
    "The binary alloy system Au/Pd; a SIMS study";
    Spectrochim. Acta, B(1982), Vol. 37(9) (1982), S. 797 - 808.

    Zusätzliche Informationen

  18. Autor/innen: H. Gnaser; Friedrich Rüdenauer, AMAT

    H. Gnaser, F. Rüdenauer:
    "Evaluation of a liquid metal ion source for secondary ion mass spectrometry";
    Nucl. Instrum. Methods(1983), Vol. 218, (1983), S. 303 - 306.

  19. Autor/innen: H. Gnaser; Friedrich Rüdenauer, AMAT

    H. Gnaser, F. Rüdenauer:
    "Positive secondary ion yields under In+ and Osub(2)sup(+) - bombardement";
    Int. J. Mass Spectrom. Ion Phys.(1983), Vol. 46, (1983), S. 503.

  20. Autor/innen: Amir Habib, AMAT; Roland Haubner, Vienna University of; Nils Stelzer, PTC

    A. Habib, R. Haubner, N. Stelzer:
    "Effect of temperature, time and particle size of Ti precursor on hydrothermal synthesis of barium titanate";
    Materials Science & Engineering B, 152 (2008), S. 60 - 65.

    Zusätzliche Informationen

  21. Autor/innen: Miro Haluska, Max-Planck-Inst.; Martin Hulman, AMAT; Björn Hornbostel, Max-Planck-Inst.

    M. Haluska, M. Hulman, B. Hornbostel:
    "Synthesis of SWCNTs for C-82 peapods by arc-discharge process using nonmagnetic catalysts";
    Physica Status Solidi B - Basic Solid State Physics, 243 (2006), 13; S. 3042 - 3045.

  22. Autor/innen: Klaus Hense, AMAT [(keine)]; Martin Tajmar, SPA; Klaus Marhold, AMAT

    K. Hense, M. Tajmar, K. Marhold:
    "Electrostatic Torque - A Misinterpretation";
    Journal of Physics A: Mathematical and General, Vol 37 (2004), S. 8747 - 8749.

  23. Autor/innen: Cristoph Hinse, SimpaTec GmbH; Rudolf Zauner, AMAT; Rene Nagel, ARC; Paul Davies, Sandvik Osprey Ltd.; Martin Kearns, Sandvik Osprey Ltd.

    C. Hinse, R. Zauner, R. Nagel, P. Davies, M. Kearns:
    "Simulation-based design for powder injection moulding";
    Powder Injection Moulding International, Vol. 1 (2007), No. 2; S. 54 - 56.

  24. Autor/innen: Sabine Höfinger, AMAT; Thomas Hebesberger, voestalpine Stahl Gm; K. Spiradek-Hahn, ADG

    S. Höfinger, T. Hebesberger, K. Spiradek-Hahn:
    "Mikrostrukturuntersuchungen an Dualphasenstählen zur Klärung des Zementitverhaltens";
    Sonderbände der Praktischen Metallographie, 38 (2006), S. 195 - 203.

  25. Autor/innen: C. Holzl, University of Vienna; H. Kuzmany, University of Vienna; Martin Hulman, AMAT

    C. Holzl, H. Kuzmany, M. Hulman:
    "Surface enhanced Raman spectroscopy of flat and curved carbon cluster";
    Physica Status Solidi B - Basic Solid State Physics, 243 (2006), 13; S. 3142 - 3145.

  26. Autor/innen: Martin Hulman, AMAT; Martin Tajmar, SPA

    M. Hulman, M. Tajmar:
    "Dielectrophoretic Attachment of Nanotube Fibres on Tungsten Needles";
    Nanotechnology, Vol. 18 (2007).

  27. Autor/innen: Martin Hulman, AMAT; Martin Tajmar, SPA

    M. Hulman, M. Tajmar:
    "Ion Emission from Carbon Nanotubes";
    Nanotechnology, Vol 18 (2007), S. 495709.

  28. Autor/innen: A. G. Jones, Department of; Rigopoulos Stelios, University College, ; Rudolf Zauner, AMAT

    A. Jones, Rigopoulos Stelios, R. Zauner:
    "Crystallization and precipitation engineering";
    Computers and Chemical Engineering, Vol. 29 (2005), S. 1159 - 1166.

  29. Autor/innen: J. Kissel, ALT; H. Zscheeg, ALT; Friedrich Rüdenauer, AMAT

    J. Kissel, H. Zscheeg, F. Rüdenauer:
    "Pulsed operation of a liquid metal ion source";
    Appl. Phys., A(1988), Vol. 47, (1988), S. 167 - 169.

  30. Autor/innen: Gernot Kronreif, ARC/MSBS; J. Kettenbach, Abteilung für Angiop; M. Figl, Institut für Biomedi; Martin Fürst, PROFA; W. Birkfellner, Institut für Biomedi; R. Hanel, Institut für Biomedi; W. Ptacek, AMAT; H. Bergmann, Institut für Biomedi

    G. Kronreif, J. Kettenbach, M. Figl, M. Fürst, W. Birkfellner, R. Hanel, W. Ptacek, H. Bergmann:
    "Robot-assisted biopsy using CT-guidance: initial results from in vitro tests";
    International Journal Investigative Radiology, Vol. 40 (2005), Nr. 4; S. 219 - 228.

  31. Autor/innen: Gernot Kronreif, ARC/MSBS; W. Korb, Innovation Center Co; Martin Kornfeld, PROFA; W. Birkfellner, Institut für Biomedi; R. Boesecke, Projektmanagement Me; M. Figl, Institut für Biomedi; Martin Fürst, PROFA; J. Kettenbach, Abteilung für Angiop; A. Vogler, AMAT; S. Hassfeld, Klinik und Poliklini

    G. Kronreif, W. Korb, M. Kornfeld, W. Birkfellner, R. Boesecke, M. Figl, M. Fürst, J. Kettenbach, A. Vogler, S. Hassfeld:
    "Risk Analysis and Safety Assessment in Surgical Robotics: A Case Study on a Biopsy Robot";
    Minimally Invasive Therapy & Allied Technologies, Vol. 14 (2005), Nr . 1; S. 23 - 31.

  32. Autor/innen: Wolfgang Lacom, AMAT; K. Spiradek-Hahn, ADG

    W. Lacom, K. Spiradek-Hahn:
    "Assessment of Thermal Treatment Conditions for Age-Hardenable Particulate-Reinforced Aluminium Alloys by Calorimetric Methods";
    Thermochimica Acta, Vol.310 (1998), S. 125 - 132.

  33. Autor/innen: D. Marton, ALT; J. Laszlo, ALT; J. Giber, ALT; Friedrich Rüdenauer, AMAT

    D. Marton, J. Laszlo, J. Giber, F. Rüdenauer:
    "EFSA - a new evaluation method of the depth resolution in depth profiling of multilayer structures";
    Vacuum(1985), Vol. 35(12) (1985), S. 523 - 526.

  34. Autor/innen: Grazyna Mozdzen, AAC; Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Mozdzen, Ch. Stocker, K. Spiradek-Hahn, M. Brabetz:
    "Erfassung der Ausscheidungszustän-de in einem hochwarmfesten 9%Cr-Stahl mittels elektrochemischer Phasenisolierung";
    Praktische Metallographie, Sonder (2003), band 34; S. 349 - 365.

  35. Autor/innen: Grazyna Mozdzen, AAC; Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Mozdzen, Ch. Stocker, K. Spiradek-Hahn, M. Brabetz:
    "Erfassung der Ausscheidungszustände in einem hochwarmfesten 9%-Cr Stahl mittels elektrochemischer Phasenisolierung";
    Praktische Metallographie, (2004), Band 41; S. 605 - 618.

  36. Autor/innen: Erich Neubauer, PTC; Paul Angerer, AMAT

    E. Neubauer, P. Angerer:
    "Phase composition and thermal expansion behaviour of zirconium tungstate prepared by rapid sintering techniques";
    Zeitschrift für Kristallographie, 1 (2007).

  37. Autor/innen: Erich Neubauer, PTC; Paul Angerer, AMAT; Gerhard Nauer, ECHEM; P. Pessenda-Garcia

    E. Neubauer, P. Angerer, G. Nauer, P. Pessenda-Garcia:
    "Texture and stress in nickel layers with incorporated zirconia particles";
    Zeitschrift für Kristallographie, 1 (2007).

  38. Autor/innen: Erich Neubauer, PTC; Paul Angerer, AMAT; Hui Yu, AMAT; Khor Khiam Aik, School of Mechanical

    E. Neubauer, P. Angerer, H. Yu, Khor Khiam Aik:
    "Texture and structure evolution of tantalum powder samples during spark-plasma-sintering (SPS) and conventional hot-pressing";
    International Journal of Refractory Metals and Hard Materials, 1 (2007).

  39. Autor/innen: M. Riedel, Eoetvoes Lorand Tudo; H. Gnaser; Friedrich Rüdenauer, AMAT

    M. Riedel, H. Gnaser, F. Rüdenauer:
    "Comparison of secondary ion yield data from amorphous and polycrystalline iron-based alloys";
    Anal. Chem.(1982), Vol. 54, (1982), S. 290 - 294.

    Zusätzliche Informationen

  40. Autor/innen: W. Riedler, ARC; Klaus Torkar, ARC; H. Jeszensky; J. Romstedt, ESTEC/ESA; H.St. Alleyne; H. Arends, ARC; W. Barth; J.V.D. Biezen; P. Ehrenfreund; Michael Fehringer, ESA/ESTEC, The Nethe; Gerhard Fremuth, Institut für Weltrau; J. Gavira; O. Havnes; E.K. Jessberger; R. Kassing, W; W. Klöck; C. Koeberl; A.C. Levasseur; M. Maurette; Friedrich Rüdenauer, AMAT; P. Schmidt, AMAT; Günther Stangl, TU Wien, IAEE; M. Steller, W; I. Weber; B. Butler

    W. Riedler, K. Torkar, H. Jeszensky, J. Romstedt, H. Alleyne, H. Arends, W. Barth, J. Biezen, P. Ehrenfreund, M. Fehringer, G. Fremuth, J. Gavira, O. Havnes, E. Jessberger, R. Kassing, W. Klöck, C. Koeberl, A. Levasseur, M. Maurette, F. Rüdenauer, P. Schmidt, G. Stangl, M. Steller, I. Weber, B. Butler:
    "MIDAS - The Micro - imaging dust analysis system for the ROSETTA mission";
    Space Science Reviews, 128 (2007), S. 869 - 904.

  41. Autor/innen: Sandrine Rouquié , ARC; Lafarie-Frenot Marie-Christine, Laboratoire de Mecan; Anneliese Pönninger, AAC; Walter Constin, AMAT

    S. Rouquié , Lafarie-Frenot Marie-Christine, A. Pönninger, W. Constin:
    "Thermal cycling under vacuum and CME evaluation of carbon/epoxy laminates";
    Materialwissenschaft und Werkstofftechnik, Vol. 34 (2003), Nr.4; S. 354 - 358.

  42. Autor/innen: Sandrine Rouquié , ARC; Lafarie-Frenot Marie-Christine, Laboratoire de Mecan; Anneliese Pönninger, AAC; Walter Constin, AMAT

    S. Rouquié , Lafarie-Frenot Marie-Christine, A. Pönninger, W. Constin:
    "Thermal cycling under vacuum and CME evaluation of carbon/epoxy laminates";
    Materialwissenschaft und Werkstofftechnik, Vol. 34 (2003), Nr.4; S. 354 - 358.

  43. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Field emission devices for space application";
    Surface Interface Analysis, 39 (2007), S. 116 - 122.

  44. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Secondary ion mass spectrometry. Future prospects";
    Int. J. Mass Spectrom. Ion Phys.(1982), Vol. 45, (1982), S. 355 - 366.

  45. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Spatially multidimensional SIMS analysis";
    Surf. Interface Anal.(1984), Vol. 6(3) (1984), S. 132 - 139.

  46. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Sputter redeposition as a limit to spatially 3-dimensional SIMS microanalysis";
    Ultramicroscopy(1988), Vol. 24, (1988), S. 115 - 124.

  47. Autor/innen: Friedrich Rüdenauer, AMAT; Walter Costin, AMAT; Grazyna Mozdzen, AAC; Ernst Semerad, AAC

    F. Rüdenauer, W. Costin, G. Mozdzen, E. Semerad:
    "FIB deposition";
    Advanced Engineering Materials, 9 (2007), S. 708 - 711.

  48. Autor/innen: Friedrich Rüdenauer, AMAT; Michael Fehringer, W; W. Riedler, ARC; Klaus Torkar, ARC; P. Schmidt, AMAT; H. Arends, ARC; R.J.L. Grard, ESTEC/ESA

    F. Rüdenauer, M. Fehringer, W. Riedler, K. Torkar, P. Schmidt, H. Arends, R.J.L. Grard et al.:
    "The MIDAS experiment for the Rosetta Mission";
    Advanced Space Research, 21 (1998), Nr. 11; S. 1547 - 1556.

    Zusätzliche Informationen

  49. Autor/innen: Friedrich Rüdenauer, AMAT; W. Riedler, ARC; V.T. Cherepin, Physical Engineering

    F. Rüdenauer, W. Riedler, V.T. Cherepin:
    "MIGMAS - An Analytical Ion Microprobe for the Space Station MIR";
    Advances in Mass Spectrometry, 14 (1998), S. 705 - 711.

  50. Autor/innen: Friedrich Rüdenauer, AMAT; J. Romstedt, W; H. Arends, ARC; R. Schmidt, W; W. Riedler, ARC; Klaus Torkar, ARC; R. Fehringer, W; R. Kassing, W

    F. Rüdenauer, J. Romstedt, H. Arends, R. Schmidt, W. Riedler, K. Torkar, R. Fehringer, R. Kassing:
    "From Laborytory Measurements to the first in - situ Analysis of pristine Comentary Grains";
    Scanning, in preparation (1998).

  51. Autor/innen: Friedrich Rüdenauer, AMAT; Günther Stangl, TU Wien, IAEE; P. Hudek, Academy of Science; I. Kostik, Academy of Science, ; I. Rangelow, University of Kassel; Karl Riedling, TU Wien, ISAS; Wolfgang Fallmann, TU Wien, IAEE

    F. Rüdenauer, G. Stangl, P. Hudek, I. Kostik, I. Rangelow, K. Riedling, W. Fallmann:
    "Mirco-technology of densely spaced non-conventional patterns for space applications";
    Microelectronic Engineering, 41/42 (1998), S. 187 - 190.

  52. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger

    F. Rüdenauer, W. Steiger et al.:
    "Cross calibration of secondary ion mass spectrometers";
    Anal. Chem.(Jul 1985), Vol. 57(8) (1985), S. 1636 - 1643.

  53. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger; D. Schrottmayer, ALT

    F. Rüdenauer, W. Steiger, D. Schrottmayer:
    "Localized ion beam induced deposition of Al-containing layers.";
    J. Vac. Sci. Technol., B(Sep/Oct 1988), Vol. 6(5) (1988), S. 1542 - 1547.

  54. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger; H. Studnicka; P. Pollinger

    F. Rüdenauer, W. Steiger, H. Studnicka, P. Pollinger:
    "Mass and energy spectra of a capillary-type indium liquid-metal ion source";
    Int. J. Mass Spectrom. Ion Process.(1987), Vol. 77, (1987), S. 63 - 74.

  55. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger; H.W. Werner, ALT

    F. Rüdenauer, W. Steiger, H.W. Werner:
    "On the use of the Saha-Eggert equation for quantitative SIMS analysis argon primary ions";
    Surf. Sci.(1976), Vol. 54, (1976), S. 553 - 560.

  56. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger; E. Wieser, Zentralinstitut für ; R. Grötzschel, ALT [Zentralinstitut ...]; F. Nähring, ALT [Zentralinstitut ...]

    F. Rüdenauer, W. Steiger, E. Wieser, R. Grötzschel, F. Nähring:
    "Formation of droplets on Si-surfaces bombarded by In from a capillary type liquid metal ion source";
    Vacuum(1985), Vol. 35, (1985), S. 315.

  57. Autor/innen: Rene Sedmik, AMAT; Vasiljevich Ivanhoe, SPA; Martin Tajmar, SPA

    R. Sedmik, Vasiljevich Ivanhoe, M. Tajmar:
    "Detailed Parametric Study of Casimir Forces in the Casimir Polder Approximation for Nontrivial 3D Geometries";
    Journal of Computer-Aided Materials Design, Vol. 14 (2007), No. 1; S. 119 - 132.

  58. Autor/innen: Ivica Smid, ARC; Erich Kny, W; Michael Scheerer, AAC; Peter Alexander Hahn, AMAT; Georg Korb, PTC; J. Linke, Forschungszentrum Jü; G. Vieider

    I. Smid, E. Kny, M. Scheerer, P. Hahn, G. Korb, J. Linke, G. Vieider:
    "Non-Destrucvtive Characterization of Plasma-Sprayed Tungsten and Braze-Joints for Fusion by Ultra-Sonic Examination";
    Fusion Engineering and Design, Vol.42 (1998), Nr.1-4; S. 511 - 517.

  59. Autor/innen: W. Steiger; Friedrich Rüdenauer, AMAT; J. Antal, ALT; S. Kugler, ALT

    W. Steiger, F. Rüdenauer, J. Antal, S. Kugler:
    "Automated peak interpretation in low resolution SIMS-spectra A comparison of two algorithms";
    Vacuum(1983), Vol. 33(6) (1983), S. 321 - 327.

  60. Autor/innen: W. Steiger; Friedrich Rüdenauer, AMAT; G. Ernst, LR

    W. Steiger, F. Rüdenauer, G. Ernst:
    "Display of three-dimensional ion microprobe data";
    Anal. Chem.(1986), Vol. 58, (1986), S. 2037 - 2040.

  61. Autor/innen: W. Steiger; Friedrich Rüdenauer, AMAT; H. Gnaser; P. Pollinger; H. Studnicka

    W. Steiger, F. Rüdenauer, H. Gnaser, P. Pollinger, H. Studnicka:
    "New developments in spatially multidimensional ion microprobe analysis";
    Mikrochim. Acta(1983), Vol. Suppl. 10, (1983), S. 111 - 117.

  62. Autor/innen: Christian Stocker, AMAT; Roman Sonnleitner, AMAT [(keine)]

    Ch. Stocker, R. Sonnleitner:
    "Einfluss einer Laves Phase auf die Kriechschädigungsprozesse in einem hochwarmfesten 9% Cr- Stahl mit Mo und B";
    Praktische Metallographie, Vol. 5/2003 (2003), S. 242 - 256.

    Zusätzliche Informationen

  63. Autor/innen: Christian Stocker, AMAT; Roman Sonnleitner, AMAT [(keine)]

    Ch. Stocker, R. Sonnleitner:
    "The Effect of a Laves Phase on Creep Damage in a High-Temperature 9%Cr- Steel Including Mo and B";
    Praktische Metallographie, 40 (2003), S. 242 - 256.

  64. Autor/innen: Martin Tajmar, SPA; Angelo Genovese, AMAT

    M. Tajmar, A. Genovese:
    "Experimental validation of a mass-efficiency model for an indium liquid-metal ion source";
    Applied Physics A-Materials Science & Processing, Vol. A 76 (2003), S. 1003 - 1006.

  65. Autor/innen: Martin Tajmar, SPA; Angelo Genovese, AMAT; Wolfgang Steiger, AMAT

    M. Tajmar, A. Genovese, W. Steiger:
    "Indium FEEP Micorthruster Experimenta Characterization";
    AIAA Journal of Propulsion and Power, Vol. 20 (2004), No. 2, pp.; S. 211 - 218.

  66. Autor/innen: Martin Tajmar, SPA; Angelo Genovese, AMAT; Wolfgang Stieger, AMAT [(keine)]

    M. Tajmar, A. Genovese, W. Stieger:
    "Indium FEEP Emission Electric Propulsion Microthruster Experimental Characterization";
    Journal of Propulsion and Power, Vol. 20 (2004), No. 2; S. 211.

  67. Autor/innen: Petra Tatzer, PROFA; Wolf Markus, W; Thomas Panner, AMAT

    P. Tatzer, W. Markus, T. Panner:
    "Industrial application for inline material sorting using hyperspectral imaging in the NIR-range";
    Real-Time Imaging, Vol. 11 (2005), Nr. 2; S. 99 - 107.

  68. Autor/innen: Klaus Torkar, ARC; Andrew Fazakerley, MSSL University Coll; Wolfgang Steiger, AMAT

    K. Torkar, A. Fazakerley, W. Steiger:
    "Active Spacecraft Potential Control: Results from the Double Star Project";
    IEEE Transactions on Plasma Science, Vol. 34 (2006), 5; S. 2046 - 2052.

  69. Autor/innen: Klaus Torkar, ARC; W. Riedler, ARC; Michael Fehringer, W; Friedrich Rüdenauer, AMAT; C.P. EEscoubet, ESTEC/ESA; H. Arends, ARC; B.T. Narheim, ARC; Knut Svenes, ARC; M.P. McCarthy, University of Washin

    K. Torkar, W. Riedler, M. Fehringer, F. Rüdenauer, C.P. EEscoubet, H. Arends, B.T. Narheim, K. Svenes, M.P. McCarthy:
    "Spacecraft potential control aboard Equator-S as a test for Cluster-II";
    Annual Geophysics (in press), Vol. 17 (1999), S. 22.

  70. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Micro Powder Injection Molding (Micro PIM)";
    Microelectronic Engineering, Vol. 83 (2006), S. 1442 - 1444.

  71. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "PIM: kostengünstige Technologie für komplex geformte Bauteile in großen Stückzahlen";
    Austria Innovativ, 2 (2007), S. 13.

  72. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Pulverspritzgießen";
    Berg- und Hüttenmännische Monatshefte, 150. Jg. (2005) (2005), Heft 7; S. 242 - 245.

  73. Autor/innen: Rudolf Zauner, AMAT; Jones Alan, University College,

    R. Zauner, J. Alan:
    "On the influence of mixing on crystal precipitation processes - application of the segregated feed model";
    Chemical Engineering Science, Vol. 57 (2002), S. 821 - 831.

  74. Autor/innen: Rudolf Zauner, AMAT; Alexander Altenburger, AMAT; Rene Nagel, ARC

    R. Zauner, A. Altenburger, R. Nagel:
    "New Application for MIM of Tungsten: Divertor Modules for ITER";
    Powder Injection Moulding International, Vol. 1 (2007), S. 50 - 52.

  75. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC; Donald Heaney, Center for Innovativ; Piemme Jobe, AMAT

    R. Zauner, Binet Chantal, D. Heaney, Piemme Jobe:
    "Variability of Feedstock Viscosity and its Effect on Dimensional Variability of Green Powder Injection Molded Components";
    Powder Metallurgy, Vol. 47 (2004), S. 151 - 156.

  76. Autor/innen: Rudolf Zauner, AMAT; A. G. Jones, Department of

    R. Zauner, A. Jones:
    "On the influence of mixing on crystal precipitation processes - application of the segregated feed model";
    Chemical Engineering Science, Vol. 57 (2002), No. 5; S. 821 - 831.

  77. Autor/innen: Rudolf Zauner, AMAT; Michael Scheerer, AAC

    R. Zauner, M. Scheerer:
    "Qualification of material DIN 1.4404 (316L) for liquid hydrogen storage applications";
    Powder Injection Moulding International, Vol. 1 (2007), No. 4; S. 60 - 62.

  78. Autor/innen: Zhilinska Natalja, ARC; Zalite Ilmars, ARC; anis Grabis J, ARC; Gottfried Kladler, AMAT [(keine)]

    Zhilinska Natalja, Zalite Ilmars, J. Grabis J, G. Kladler:
    "High Temperature Construction Materials on the Basis of Nanodisperse Silicon Nitride";
    Materialwissenschaft und Werkstofftechnik, Vol. 34 (2003), Issue 4; S. 327 - 331.

  79. Autor/innen: Zhilinska Natalja, ARC; Zalite Ilmars, ARC; anis Grabis J, ARC; Gottfried Kladler, AMAT [(keine)]

    Zhilinska Natalja, Zalite Ilmars, J. Grabis J, G. Kladler:
    "High Temperature Construction Materials on the Basis of Nanodisperse Silicon Nitride";
    Materialwissenschaft und Werkstofftechnik, Volume 34 (2003), Issue 4; S. 327 - 331.


Buchbeiträge


  1. Autor/innen: Andreas Dedinak, AMAT; Christian Wögerer, Profactor; Helmut Haslinger, ARC; Peter Hadinger, AMAT [(keine)]

    A. Dedinak, C. Wögerer, H. Haslinger, P. Hadinger:
    "Vertical Integration on Industrial Examples"; Springer Science+Business Media Deutschland GmbH, Berlin, 2006, ISBN: 0-387-22828-4, S. 413 - 422.

  2. Autor/innen: Franz Kager, ADG; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT; Günter Zeiler, Böhler

    F. Kager, K. Spiradek-Hahn, M. Brabetz, G. Zeiler:
    ""Beurteilung des Kriechverformungszustandes eines 9 % Cr-Stahls mit Bor und Kobalt mit Hilfe elektronenmikroskopischer Untersuchungen";
    in: "Fortschritte in der Metallographie", DGM, 2008, S. 179.

  3. Autor/innen: Andreas Kreutzer, AMAT; Gerhard Traxler, PROFA

    A. Kreutzer, G. Traxler:
    "Auswertemethoden für die thermografische Risskontrolle mit punktförmiger Anregung";
    in: "Diplomarbeit von Andreas Kreutzer, FH-Wr.Neustadt Firmenbetreuung: Gerhard Traxler, ARC Seibersdorf research", Eigenverlag, Seibersdorf, 2006.

    Zusätzliche Informationen

  4. Autor/innen: Franka Pravdic, W [(keine)]; Kilian Helmut, AMAT; Martin Brandecker, LKR; Christian Wögerer, Profactor; Gerhard Traxler, PROFA

    F. Pravdic, K. Helmut, M. Brandecker, C. Wögerer, G. Traxler:
    "Magnesium - Science, Technology and Applications"; Trans Tech Publications ltd, Switzerland, 2005, ISBN: 0-87849-968-7, S. 349 - 355.

  5. Autor/innen: Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Günter Zeiler, Böhler

    Ch. Stocker, K. Spiradek-Hahn, G. Zeiler:
    "Microstructural Features Influencing the creep properties 9-12% CR - Steels on Laves-Phase Precipitation"; Schriften des Forschungszentrum Jülich, Reihe Energietechnik, Liege, 2002, ISBN: 3-89336-312-2, S. 1459 - 1468.

  6. Autor/innen: Martin Tajmar, SPA; Florin Plesescu, AMAT [(keine)]; Bernhard Seifert, SPA; Reinhard Schnitzer, AMAT; Vasiljevich Ivanhoe, SPA

    M. Tajmar, F. Plesescu, B. Seifert, R. Schnitzer, Vasiljevich Ivanhoe:
    ""Investigation of Flame-Dragging-Like Signals from Spinning Superconductors"";
    in: "AIP Confesence Proceedings", AIP Conference, 2008, S. 1080 - 1090.

  7. Autor/innen: Martin Tajmar, SPA; Florin Plesescu, AMAT [(keine)]; Bernhard Seifert, SPA; Reinhard Schnitzer, AMAT; Vasiljevich Ivanhoe, SPA

    M. Tajmar, F. Plesescu, B. Seifert, R. Schnitzer, Vasiljevich Ivanhoe:
    ""Search for Frame-Dragging-LikeSignals Close to Spinning Superconductors"";
    in: "Proceedings of the 2nd International Conference on Time and Matter", Proceedings of the 2nd International Conference on Time and Matter, 2008, S. 49 - 74.


Beiträge in Tagungsbänden


  1. Autor/innen: Alina Agüero, Inst. Nac de Tec. Ae; K. Spiradek-Hahn, ADG; Sabine Höfinger, AMAT; Manuel Gutierrez, Inasmet, Ceramics; R. Muelas, Inst. Nac. de. Tecn.

    A. Agüero, K. Spiradek-Hahn, S. Höfinger, M. Gutierrez, R. Muelas:
    "Microstructural Evolution of Slurry Fe Aluminide coatings During High Temperature Steam Oxidation";
    in: "HTCPM 23008", herausgegeben von: 7th Internation Symposium on High-Temperature Corrosion and Protection of Materials; Konferenz, France, 2008.

  2. Autor/innen: Atre Sundar, ARC; Carl Wu, Oregon State Univers; Hwang Chul Jin, KITECH, Korea Instit; Rudolf Zauner, AMAT; Jin Park Seong, ARC; Randall German , ARC

    Atre Sundar, C. Wu, Hwang Chul Jin, R. Zauner, J. Park Seong, R. German :
    "Technical and Economical Comparison of Micro Powder Injection Molding";
    in: "World Congress on Powder Metallurgy and Particulate Materials", Eigenverlag, Busan, Korea, 2006, S. 45 - 46.

  3. Autor/innen: Ewald Babka; Harald Bleier, ecoplus NÖ Wirtschaf; Rudolf Zauner, AMAT; Helmut Loibl

    E. Babka, H. Bleier, R. Zauner, H. Loibl:
    "The Austrian PIM Group - A Story of Success";
    in: "EUROPM 2006, Volume 2", Eigenverlag, 2006, S. 145 - 150.

  4. Autor/in: Nikolaus Böck, AMAT

    N. Böck:
    "Dislocation Mobility in 9% Chromium Steels Exposed to Creep";
    in: "Proceedings of 8th Liège Conference on Materials for Advanced Power Engineering", Eigenverlag, Liège, Belgien, 2006, ISBN: 3-89336-436-6, S. 1207 - 1216.

  5. Autor/innen: Buldrini Nembo, AMAT; Bernhard Seifert, SPA; Klaus Marhold, AMAT; Martin Tajmar, SPA

    Buldrini Nembo, B. Seifert, K. Marhold, M. Tajmar:
    "Experimental Study of the Machian Mass Fluctuation Effect Using a N Thrust Balance";
    in: "Proceedings of the Space Technology and Applications International Forum (STAIF-2006)", herausgegeben von: edited by El-Genk, M.S.; Eigenverlag, New York, 2006, S. 1313 - 1320.

  6. Autor/innen: Buldrini Nembo, AMAT; Martin Tajmar, SPA; Klaus Marhold, AMAT; Bernhard Seifert, SPA

    Buldrini Nembo, M. Tajmar, K. Marhold, B. Seifert:
    "Experimental Results of the Woodward Effect on a N Thrust Balance";
    in: "AIAA", Eigenverlag, 2006.

  7. Autor/innen: Paul Davies, Sandvik Osprey Ltd.; Martin Kearns, Sandvik Osprey Ltd.; Rudolf Zauner, AMAT

    P. Davies, M. Kearns, R. Zauner:
    "Development of Copper and Copper Alloy Powders for MIM Applications";
    in: "EUROPM 2006, Volume 2", Eigenverlag, Ghent, 2006, S. 71 - 78.

  8. Autor/innen: Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Karl Andres, AMAT [(keine)]; Martin Tajmar, SPA

    A. Genovese, Buldrini Nembo, K. Andres, M. Tajmar:
    "5000h Endurance Test of an Indium FEEP 2x2 Cluster";
    in: "AIAA", Eigenverlag, 2006.

  9. Autor/innen: Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Reinhard Schnitzer, AMAT; Martin Tajmar, SPA

    A. Genovese, Buldrini Nembo, R. Schnitzer, M. Tajmar:
    "3000 Hour Lifetime Test of an Indium FEEP Cluster for the LISA Pathfinder Mission";
    in: "IEPC-2007", IEPC, 2007, S. 140.

  10. Autor/innen: Amir Habib, AMAT; Roland Haubner, Vienna University of; Georg Jakopic, Institut für Nanostr; Nils Stelzer, PTC

    A. Habib, R. Haubner, G. Jakopic, N. Stelzer:
    "Synthesis of barium titanate (BT) nano particles via hydrotermal route for the production of BT-polymer nanocomposite";
    in: "AIP Conference Proeedings", American Institute of Physics, 2007, S. 157 - 161.

  11. Autor/innen: Donald Heaney, Center for Innovativ; Rudolf Zauner, AMAT; Piemme Jobe, AMAT; Binet Chantal, ARC; Kristina Cowan, ARC

    D. Heaney, R. Zauner, Piemme Jobe, Binet Chantal, K. Cowan:
    "Dimensional Variability of Green MIM Components";
    in: "Powder Injection Molding Conference PIM 2002", Eigenverlag, San Diego, 2002.

  12. Autor/innen: Franz Kager, ADG; Nikolaus Böck, AMAT; K. Spiradek-Hahn, ADG; Sabine Höfinger, AMAT; Manfred Brabetz, AMAT; Günter Zeiler, Böhler

    F. Kager, N. Böck, K. Spiradek-Hahn, S. Höfinger, M. Brabetz, G. Zeiler:
    "Superior Long-Term Creep Behaviour and Microstructural Evolution of 9%Cr-Steels with Boron";
    in: "Proceedings of 8th Liège Conference on Materials for Advanced Power Engineering", Eigenverlag, Liège, Belgien, 2006, ISBN: 3-89336-436-6, S. 1031 - 1040.

  13. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, F. Haruvy Yaara:
    "Engineering-Scale fabrication and space-environment testing for Re-Entry C-SiC Ceramic Matrix Composites and Oxygen Protective Systems made by the Fast Sol-Gel";
    in: "Materials in a Space Environment", Eigenverlag, Collioure (France), 2006.

  14. Autor/innen: Rene Nagel, ARC; Rudolf Zauner, AMAT

    R. Nagel, R. Zauner:
    "Corrosion and Abrasion-resistant High Performance Steel Böhler M390 Microclean by MIM";
    in: "EUROPM 2006, Volume 2", Eigenverlag, Ghent, 2006, S. 79 - 84.

  15. Autor/innen: Erich Neubauer, PTC; Ivica Smid, ARC; Paul Angerer, AMAT; Michael Kitzmantel, PTC

    E. Neubauer, I. Smid, P. Angerer, M. Kitzmantel:
    "Copper based composites reinforced with carbon nanofibers";
    in: "Proceedings (CD-ROM) of POWDERMET Conference, 13.-16.05.2007", Eigenverlag, USA, 2007.

  16. Autor/innen: Anneliese Pönninger, AAC; Marianne Kiniger, AMAT [(keine)]

    A. Pönninger, M. Kiniger:
    "Coefficient of moisture expansion (CME) and thermal expansion (CTE) of printed circuit boards";
    in: "Proceedings of 10th ISMSE", Eigenverlag, Colliure, 2006.

  17. Autor/innen: Carsten Scharlemann, SPA; Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Reinhard Schnitzer, AMAT; Martin Tajmar, SPA

    C. Scharlemann, A. Genovese, Buldrini Nembo, R. Schnitzer, M. Tajmar:
    "Development and Test of an Indium FEEP Micropropulsion Subsystem for LISA Pathfinder";
    in: "AIAA-2007", AIAA, 2007, S. 5251.

  18. Autor/innen: Carsten Scharlemann, SPA; Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Reinhard Schnitzer, AMAT; Martin Tajmar, SPA; Helmut Früholz, EADS; Rainer Killinger, Astrium Space Transp

    C. Scharlemann, A. Genovese, Buldrini Nembo, R. Schnitzer, M. Tajmar, R. Früholz, R. Killinger:
    "Status of the Indium FEEP Micropropulsion Subsystem Development for LISA Pathfinder";
    in: "IEPC-2007", IEPC, 2007, S. 122.

  19. Autor/innen: Carsten Scharlemann, SPA; Markus Schiebl, SPA; Robert Amsüss, AMAT; Martin Tajmar, SPA

    C. Scharlemann, M. Schiebl, R. Amsüss, M. Tajmar:
    "Development of Miniaturized Green Propellant Based Mono- and Biopropellant Thrusters";
    in: "AIAA-2007", AIAA, 2007, S. 5580.

  20. Autor/innen: Carsten Scharlemann, SPA; Markus Schiebl, SPA; Robert Amsüss, AMAT; Martin Tajmar, SPA; Pierpaolo Miotti , ARC; C. Guraya, INASMET; F. Seco, INASMET; C. Kappenstein, LACCO; Y. Batonneau, LACCO; R. Brahmi, LACCO; C. Hunter, ESTEC

    C. Scharlemann, M. Schiebl, R. Amsüss, M. Tajmar, P. Miotti , C. Guraya, F. Seco, C. Kappenstein, Y. Batonneau, R. Brahmi, C. Hunter:
    "Monopropellant Thruster Development: Investigation of Decomposition Inefficiencies";
    in: "Proceedings of the 3rd International Conference on Green Propellants for Space Propulsion", Eigenverlag, Poitier, 2006.

  21. Autor/innen: Carsten Scharlemann, SPA; Markus Schiebl, SPA; Klaus Marhold, AMAT; Martin Tajmar, SPA; Pierpaolo Miotti , ARC; C. Guraya, INASMET; F. Seco, INASMET; C. Kappenstein, LACCO; Y. Batonneau, LACCO; R. Brahmi, LACCO; M. Lang, ESA

    C. Scharlemann, M. Schiebl, K. Marhold, M. Tajmar, P. Miotti , C. Guraya, F. Seco, C. Kappenstein, Y. Batonneau, R. Brahmi, M. Lang:
    "Test of a Turbo-Pump Fed Miniature Rocket Engine";
    in: "AIAA", Eigenverlag, 2006.

  22. Autor/innen: Carsten Scharlemann, SPA; Markus Schiebl, SPA; Klaus Marhold, AMAT; Martin Tajmar, SPA; Pierpaolo Miotti , ARC; C. Kappenstein, LACCO; Y. Batonneau, LACCO; R. Brahmi, LACCO; C. Hunter, ESTEC

    C. Scharlemann, M. Schiebl, K. Marhold, M. Tajmar, P. Miotti , C. Kappenstein, Y. Batonneau, R. Brahmi, C. Hunter:
    "Development and Test of a Miniature Hydrogen Peroxide Monopropellant Thruster";
    in: "AIAA", Eigenverlag, 2006.

  23. Autor/innen: Rene Sedmik, AMAT; Martin Tajmar, SPA

    R. Sedmik, M. Tajmar:
    "CasimirSim - A Tool to Compute Casimir Polder Forces for Nontrivial 3D Geometries";
    in: "STAIF-2007 Conference", AIP Conference, 2007, S. 1148 - 1155.

  24. Autor/innen: Günter Szalay, AMAT; R. Grill, ALT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Szalay, R. Grill, K. Spiradek-Hahn, M. Brabetz:
    ""TEM investingations of microalloyed steels with Nb, V and Ti after different treaments"";
    in: ""TEM investingations of microalloyed steels with Nb, V and Ti after different treaments"", Emc 2008, Konferenz, Aachen, Deutschland, 2008, S. 493 - 494.

  25. Autor/innen: Martin Tajmar, SPA; Florin Plesescu, AMAT [(keine)]; Bernhard Seifert, SPA; Klaus Marhold, AMAT

    M. Tajmar, F. Plesescu, B. Seifert, K. Marhold:
    "Measurement of Gravitomagnetic and Acceleration Fields Around Rotating Superconductors";
    in: "STAIF 2007 Conference", AIP Conference, 2007, S. 1071 - 1082.

  26. Autor/innen: Martin Tajmar, SPA; Carsten Scharlemann, SPA; Angelo Genovese, AMAT; Buldrini Nembo, AMAT; M. Boss, EADS Astrium; Helmut Früholz, EADS; Rainer Killinger, Astrium Space Transp

    M. Tajmar, C. Scharlemann, A. Genovese, Buldrini Nembo, M. Boss, R. Früholz, R. Killinger:
    "Indium FEEP Micropropulsion Subsystem for LISA Pathfinder";
    in: "AIAA Joint Propulsion Conference", Eigenverlag, 2006.

  27. Autor/innen: Rudolf Zauner, AMAT; Alexander Altenburger, AMAT; Rene Nagel, ARC

    R. Zauner, A. Altenburger, R. Nagel:
    "New Application for MIM of Tungsten: Divertor Modules for ITER";
    in: "EUROPM 2006, Volume 2", Eigenverlag, Ghent, 2006, S. 105 - 110.

  28. Autor/innen: Rudolf Zauner, AMAT; Walter Grienauer, AMAT; Georg Korb, PTC

    R. Zauner, W. Grienauer, G. Korb:
    "Rapid Tooling for PIM";
    in: "Powder Injection Molding Conference PIM 2004", Eigenverlag, Orlando, 2004.

  29. Autor/innen: Rudolf Zauner, AMAT; Donald Heaney, Center for Innovativ; Piemme Jobe, AMAT; Binet Chantal, ARC; Randall German , ARC

    R. Zauner, D. Heaney, Piemme Jobe, Binet Chantal, R. German :
    "The Effect of Powder Type and Powder Size on Dimensional Variability in PIM";
    in: "PM2Tec 2002 World Congress on Powder Metallurgy and Particulate Materials", Eigenverlag, Orlando, 2002, S. 315 - 320.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


  1. Autor/innen: Jones Alan, University College, ; Rigopoulos Stelios, University College, ; Rudolf Zauner, AMAT

    J. Alan, Rigopoulos Stelios, R. Zauner:
    "Crystallization and precipitation engineering";
    Vortrag: European Symposium on Computer Aided Process Engineering, Lisbon, Portugal; 16.05.2004 - 19.05.2004; in: "European Symposium on Computer Aided Process Engineering", Schriftenreihe: Computer aided chemical engineering Elsevier, Vol. 18 Amsterdam (2004), ISBN: 0-444-51694-8; S. 32 - 46.

  2. Autor/innen: Paul Angerer, AMAT; Georg Korb, PTC; Yu Li Gen, School of Mechanical; Khor Khiam Aik, School of Mechanical; Zalite Ilmars, ARC

    P. Angerer, G. Korb, Yu Li Gen, Khor Khiam Aik, Zalite Ilmars:
    "Compaction of Titanium Carbonitride powder samples of various C/N ratio by Spark-Plasma-Sintering (SPS) and by conventional hot pressing";
    Vortrag: Powder Metallurgy World Congress & Exhibition PM2004, Vienna, Austria; 17.10.2004 - 21.10.2004; in: "Powder Metallurgy World Congress & Exhibition PM2004", (2004), PM2004.

  3. Autor/innen: Paul Angerer, AMAT; Yu Li Gen, School of Mechanical; Khor Khiam Aik, School of Mechanical; Georg Korb, PTC; Zalite Ilmars, ARC

    P. Angerer, Yu Li Gen, Khor Khiam Aik, G. Korb, Zalite Ilmars:
    "Spark-Plasma-Sintering (SPS) of nanostructured Tungsten carbide powders";
    Vortrag: 3rd MP3 Conference, Singapore; 24.11.2004 - 26.11.2004; in: "3rd MP3 Conference", (2004), -; S. 175 - 184.

  4. Autor/innen: Lubos Baca, PTC; Georg Krumpel, AMAT [(keine)]; K. Spiradek-Hahn, ADG; Nils Stelzer, PTC

    L. Baca, G. Krumpel, K. Spiradek-Hahn, N. Stelzer:
    "Electrical and spectroscopic investigations of nano-scaled Sb doped SnO2 thin films on various glass substrates";
    Vortrag: 5th Int. Conf. on Coating on Glass, Saarbrücken, Germany; 04.07.2004 - 08.07.2004; in: "5 th Int. Conf. on Coating on Glass Advanced coatings on glass & plastics for large-area or high-volume products", Leibnitz Institut für Neue Materialien - INM, Saarbrücken (2004), -; S. 481.

  5. Autor/innen: Boro Djuricic, ARC; Georg Krumpel, AMAT [(keine)]; Christian Lengauer, Institut für Mineral; Manfred Brabetz, AMAT

    B. Djuricic, G. Krumpel, Ch. Lengauer, M. Brabetz:
    "Processing of nanoscale ceramic particles";
    Vortrag: ICM - Int. Congress Centre Munich, Germany; 03.10.2001 - 04.10.2001; in: "ICM - Int. Congress Centre Munich Proceeding of Materialica - Materials Week 2001", (2001), -.

  6. Autor/innen: Boro Djuricic, ARC; Georg Krumpel, AMAT [(keine)]; Christian Lengauer, Institut für Mineral; Manfred Brabetz, AMAT

    B. Djuricic, G. Krumpel, Ch. Lengauer, M. Brabetz:
    "Processing of Nanoscale Ceramic Particles";
    Vortrag: Materials Week; International Congress on Advanced Materials , their Processes and Applicaitons, Munich; 01.10.2001 - 04.10.2001; in: "Materials Week; International Congress on Advanced Materials , their Processes and Applicaitons", (2001), 1; S. 3.

  7. Autor/innen: R. Dobrozemsky; Friedrich Rüdenauer, AMAT; F.P. Viehböck, ALT; A. Breth

    R. Dobrozemsky, F. Rüdenauer, F.P. Viehböck, A. Breth:
    "Proceedings";
    Vortrag: 7. international vacuum congress and 3. international conference on solid surfaces., Vienna (Austria); 12.09.1977 - 16.09.1977; in: "7. international vacuum congress and 3. international conference on solid surfaces.", Vol. 1-3 (1977), S. 2758.

  8. Autor/innen: Michael Fehringer, W; Friedrich Rüdenauer, AMAT; Wolfgang Steiger, AMAT

    M. Fehringer, F. Rüdenauer, W. Steiger:
    "Micronewton Indium Ion Thrusters";
    Vortrag: 26th International Electric Propulsion Conference, Kitakyushu, Japan; 17.10.1999 - 21.10.1999; in: "26th International Electric Propulsion Conference", to be published in "Jap. Soc. Aeron. Space Sc" 1999, (1999), S. 4.

  9. Autor/in: Ulrike Galovsky, AMAT

    U. Galovsky:
    "Bestimmung von Bruchzähigkeitswerten bei Schaumaluminium";
    Vortrag: Schaumtagung, Wien; 2000; in: "Schaumtagung Tagungsband der Schaumtagung", (2000).

  10. Autor/in: Ulrike Galovsky, AMAT

    U. Galovsky:
    "Magnesium Alloys and their Application";
    Vortrag: Processing for Properties II, San Franscisco; 2000; in: "Processing for Properties II", (2000).

  11. Autor/innen: Ge Chang-Chun, ARC; Li Jiang-Tao, University of Beijin; Boro Djuricic, ARC; Roman Sonnleitner, AMAT [(keine)]

    Ge Chang-Chun, L. Jiang-Tao, B. Djuricic, R. Sonnleitner:
    "Dispersed nanocrystals in Y- a - Sialon ceramics";
    Vortrag: Int. Symp. on Nanomaterials and Techn., 3rd - 5th July 2001; 2001; in: "Int. Symp. on Nanomaterials and Techn.", (2001), 1; S. 3.

  12. Autor/innen: Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Martin Tajmar, SPA; Tamas Eduard, AMAT; Vasiljevich Ivanhoe, SPA; Klaus Marhold, AMAT; Friedrich Rüdenauer, AMAT

    A. Genovese, Buldrini Nembo, M. Tajmar, T. Eduard, Vasiljevich Ivanhoe, K. Marhold, F. Rüdenauer:
    "Indium FEEP Cluster Development";
    Vortrag: 41th Joint Propulsion Conference, Tucson, Arizona; 10.07.2005 - 13.07.2005; in: "41th Joint Propulsion Conference", American Institute of Aeronautics and Astronautics, Reston, Va. (2005), Paper No.AIAA-2005-4385; S. 4385.

  13. Autor/innen: Angelo Genovese, AMAT; Wolfgang Steiger, AMAT; Martin Tajmar, SPA

    A. Genovese, W. Steiger, M. Tajmar:
    "Indium FEEP Microthruster: Experimental Characterization in the 1-100 N Range";
    Vortrag: AIAA Joint Propulsion Conference, Salt Lake City; 07.07.2001 - 12.07.2001; in: "AIAA Joint Propulsion Conference", (2001), 2001-3788; S. 11.

  14. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA; Buldrini Nembo, AMAT; Michael Scheerer, AAC; Ernst Semerad, AAC

    A. Genovese, M. Tajmar, Buldrini Nembo, M. Scheerer, E. Semerad:
    "Indium FEEP Multiemitter Development and Test Results";
    Vortrag: AIAA Joint Propulsion Conference, Fort Lauderdale; 11.07.2004 - 14.07.2004; in: "AIAA Joint Propulsion Conference 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference", American Institute of Aeronautics and Astronautics, Reston, Va. (2004), Paper No. 3620.

  15. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA; Buldrini Nembo, AMAT; Wolfgang Steiger, AMAT

    A. Genovese, M. Tajmar, Buldrini Nembo, W. Steiger:
    "Extended Endurance Test of the Indium FEEP";
    Vortrag: 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Inianapolis; 07.07.2002 - 10.07.2002; in: "38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit", American Institute of Aeronautics and Astronautics, Reston, Va. (2002), AIAA papers No. 2002-3688; S. 5.

  16. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA; Wolfgang Steiger, AMAT; Friedrich Rüdenauer, AMAT

    A. Genovese, M. Tajmar, W. Steiger, F. Rüdenauer:
    "Indium FEEP Endurance Test: Preliminary Results";
    Vortrag: 27th International Electric Propulsion Conference, Pasadena, California; 15.10.2001 - 19.10.2001; in: "27th International Electric Propulsion Conference", (2001), IEPC-01-289; S. 16.

    Zusätzliche Informationen

  17. Autor/innen: H. Gnaser; M. Riedel, Eoetvoes Lorand Tudo; J. Marton, Techn. Univ., Vienna; Friedrich Rüdenauer, AMAT

    H. Gnaser, M. Riedel, J. Marton, F. Rüdenauer:
    "Secondary ion emission from binary and ternary amorphous alloys";
    Vortrag: 3. international conference on ion mass spectrometry (SIMS III)., Budapest (Hungary); 30.08.1981 - 05.09.1981; in: "3. international conference on ion mass spectrometry (SIMS III).", (1982), S. 282 - 287.

  18. Autor/innen: Peter Alexander Hahn, AMAT; Thomas Goss, AMAT [(keine)]; Alfred Karlovsky, AMAT; Michael Scheerer, AAC; Anneliese Pönninger, AAC; Elisabeth Ladstätter, FACC

    P. Hahn, T. Goss, A. Karlovsky, M. Scheerer, A. Pönninger, E. Ladstätter:
    "An Algorithm for Life Time Prediction of Fatigue Loaded CFRP-Structures Derived from the Rate of Acoustic Emission";
    Vortrag: Fourth European Workshop on Structural Health Monitoring, Krakow, Poland; 02.07.2008 - 04.07.2008; in: "Proceedings of the Fourth European Workshop STRUCTURAL HEALTH MONITORING 2008", (2008), S. 1175 - 1185.

  19. Autor/innen: Herranz Gemma, Universidad Carlos I; Levenfeld Belen, Universidad Carlos I; Alejandro Varez, Universidad Carlos I; Rene Nagel, ARC; Rudolf Zauner, AMAT

    Herranz Gemma, Levenfeld Belen, A. Varez, R. Nagel, R. Zauner:
    "Influence of the Powder Surface Treatment with Stearic Acid on Powder Injection Moulding of M2 HSS Using a HPDE Based Binder";
    Vortrag: Powder Metallurgy World Congress PM2004, Vienna; 17.10.2004 - 21.10.2004; in: "Powder Metallurgy World Congress PM2004", European Powder Metallurgy Association, Shrewsbury (2004), ISBN: 1-89907-215-2.

  20. Autor/innen: Marcus Keding, SPA; Piotr Dudzinski, SPA; Alexander Reissner, AMAT

    M. Keding, P. Dudzinski, A. Reissner:
    "Development on Innovative Hydrogen and Micro Energy Converts at the Austrian Research Centers";
    Vortrag: 6th International Energy Conversion Engineering Conference, Cleveland, USA; 28.07.2008; in: "AIAA-2008-5643", (2008).

  21. Autor/innen: H. Keune, Inst. of Surface Tec; G. Wahl, Inst. of Surface Tec; Wolfgang Lacom, AMAT

    H. Keune, G. Wahl, W. Lacom:
    "Chemical Vapor Deposition of MoS2 on and in TiN Coatings";
    Vortrag: Fifteenth International Symposium on Chemical Vapor Deposition, Toronto; 01.05.1999 - 31.05.1999; in: "Fifteenth International Symposium on Chemical Vapor Deposition", Proceedings volume for the 15th International Symposium on Chemical Vapor Deposition, (2000), S. 6.

    Zusätzliche Informationen

  22. Autor/innen: Georg Krumpel, AMAT [(keine)]; Boro Djuricic, ARC; Dietmar Voll, ARC; Christian Lengauer, Institut für Mineral; Anton Beran, Institut für Mineral; Ekkehart Tillmanns, Institut für Mineral; Werner Wruss, ARC

    G. Krumpel, B. Djuricic, D. Voll, Ch. Lengauer, A. Beran, E. Tillmanns, W. Wruss:
    "Hydothermal synthesis of nanostructured titania particles and their optical properties";
    Vortrag: CIMTEC 2002, 10th Int. Congress on Modern Materials & Technologies, Section C, Florence, Italy; 14.07.2002 - 18.07.2002; in: "CIMTEC 2002, 10th Int. Congress on Modern Materials & Technologies, Section C CIMTEC 2002 Proceedings", (2003), Part A; S. 489 - 499.

  23. Autor/innen: Georg Krumpel, AMAT [(keine)]; Boro Djuricic, ARC; Werner Wruss, ARC; Wilfried Körner, Institut für Geologi; Dietmar Voll, ARC; Christian Lengauer, Institut für Mineral

    G. Krumpel, B. Djuricic, W. Wruss, W. Körner, D. Voll, Ch. Lengauer:
    "Kinetics and Mechanisms of Hydrothermal Synthesis of Nanostructured Titania";
    Vortrag: Euromat 2003, Lousanne; 01.09.2003 - 05.09.2003; in: "Euromat 2003 Symposium Nanoparticulate Materials, Synthesis, Properties and Application", (2003), Topic E.

  24. Autor/innen: Georg Krumpel, AMAT [(keine)]; Boro Djuricic, ARC; Werner Wruss, ARC; Christian Lengauer, Institut für Mineral; Dietmar Voll, ARC; Nils Stelzer, PTC

    G. Krumpel, B. Djuricic, W. Wruss, Ch. Lengauer, D. Voll, N. Stelzer:
    "Preparation of nanostructured Titania-Silica optical coatings using a combination of hydrothermal crystallization and sol-gel technique";
    Vortrag: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien; 02.07.2003 - 04.07.2003; in: "14. Symposium Verbundwerkstoffe und Werkstoffverbunde Tagungsband "Verbundwerkstoffe"", Wiley-VCH Verlag, Weinheim (2003), ISBN: 3-527-30762-1; S. 790 - 794.

  25. Autor/innen: Georg Krumpel, AMAT [(keine)]; Dietmar Voll, ARC; Christian Lengauer, Institut für Mineral; Georg Jakopic, Institut für Nanostr; Anton Beran, Institut für Mineral; Boro Djuricic, ARC

    G. Krumpel, D. Voll, Ch. Lengauer, G. Jakopic, A. Beran, B. Djuricic:
    "Influence of the precursor chemistry on the crystallization of nanostructured TiO2 - particles";
    Vortrag: 3rd International Conference on Inorganic Materials, Germany; 07.09.2002 - 10.09.2002; in: "3rd International Conference on Inorganic Materials Proceeding of the 3rd International Conference on Inorganic Materials, Section A: electronic and optical materials Konstanz", (2002), Section A.

  26. Autor/innen: Georg Krumpel, AMAT [(keine)]; Werner Wruss, ARC; Boro Djuricic, ARC; Christian Lengauer, Institut für Mineral; Dietmar Voll, ARC; Nils Stelzer, PTC

    G. Krumpel, W. Wruss, B. Djuricic, Ch. Lengauer, D. Voll, N. Stelzer:
    "Herstellung nanostrukturierter optischer Schichten mittel einer Kombination der hydrothermalen Synthese und der Sol-Gel Technik";
    Vortrag: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien; 02.07.2003 - 04.07.2003; in: "14. Symposium Verbundwerkstoffe Werkstoffverbunde Tagungsband "Verbundwerkstoffe"", Wiley-VCH-Verlag, Weinheim (2003), ISBN: 3-527-30-762-1; S. 790 - 793.

  27. Autor/innen: Volker Liedtke, AAC; F. Haruvy Yaara, ARC; Huertas Olivares Inmaculada, AMAT [(keine)]; Ernst Semerad, AAC

    V. Liedtke, F. Haruvy Yaara, Huertas Olivares Inmaculada, E. Semerad:
    "Novel CMC manufacturing by fast-sol-gel Process - FABRICATION, characterisation, and upscaling issues for EXPERT applications";
    Vortrag: EXPERT Session in The 5th European Workshop on Thermal Protection Systems and Hot Structures, Noordwijk, the Netherlands; 17.05.2006 - 19.05.2006; in: "EXPERT Session in The 5th European Workshop on Thermal Protection Systems and Hot Structures", (2006), -.

  28. Autor/innen: Klaus Marhold, AMAT; Martin Tajmar, SPA

    K. Marhold, M. Tajmar:
    "Micronewton Thrust Balance for Indium FEEP Thrusters";
    Vortrag: 41th Joint Propulsion Conference, Tucson, Arizona; 10.07.2005 - 13.07.2005; in: "41th Joint Propulsion Conference", American Institute of Aeronautics and Astronautics, Reston, Va. (2005), Paper No.AIAA-2005-4387; S. 4387.

  29. Autor/innen: Andreas Merstallinger, AAC; Markus Fink, AMAT; Erich Neubauer, PTC; J. Eder, ALT; Christian Holzapfel, Schleifring; J. Rehder; Rene Seiler, ESTEC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, M. Fink, E. Neubauer, J. Eder, C. Holzapfel, J. Rehder, R. Seiler, L. Gaillard , L. Pambaguian:
    ""Self-lubricating Copper Composites for Tribological applications in Ambient, Dry and Vacuum conditions"";
    Vortrag: Oral presentation and proceedings, Esslingen; 15.01.2008 - 17.01.2008; in: "16th International Colloquium Tribology", (2008).

  30. Autor/innen: Andreas Merstallinger, AAC; Wolfgang Lacom, AMAT

    A. Merstallinger, W. Lacom:
    "Influence of environment and material condition on Wear and cold welding of particulate reinforced Aluminium alloys";
    Vortrag: 11th International Colloquium Tribology, Technische Akdadmie Esslingen; 13.01.1998 - 15.01.1998; in: "11th International Colloquium Tribology", Vol. III (1999), S. 1879 - 1882.

  31. Autor/innen: Bernhard Mingler, HBS; Leonhard Zeipper, AMAT [(keine)]; Karnthaler Hans-Peter, Univ. Wien; Michael Zehetbauer, ARC

    B. Mingler, L. Zeipper, Karnthaler Hans-Peter, M. Zehetbauer:
    "TEM investigations of Ti deformed by ECAP";
    Vortrag: 2nd Int. Conference on Nanomaterials by Severe Plastic Deformation, Vienna; 09.12.2002 - 13.12.2002; in: "2nd Int. Conference on Nanomaterials by Severe Plastic Deformation", (2004), SPD2; S. 369 - 374.

  32. Autor/innen: Juergen Mueller , ARC; Colleen Marrese-Reading, ARC; John Ziemer, Jet Propulsion Labor; Amanda Green, ARC; Yang Eui-Hyeok, Jet Propulsion Labor; Mohammad Mojarradi, Jet Propulsion Labor; Johnson Travis, Jet Propulsion Labor; Victor White, Jet Propulsion Labor; David Bame, Jet Propulsion Labor; Richard Wirz, California Institute; Martin Tajmar, SPA; Hruby Vlad, AMAT [(keine)]; Manuel Gamero-Castano, Busek Co Inc., Natic; Jochen Schein, Alameda Applied Scie; Robert Reinicke, Moog Space Products

    J. Mueller , C. Marrese-Reading, J. Ziemer, A. Green, Yang Eui-Hyeok, M. Mojarradi, Johnson Travis, V. White, D. Bame, R. Wirz, M. Tajmar, Hruby Vlad, M. Gamero-Castano, J. Schein, R. Reinicke:
    "JPL Micro-Thrust Propulsion Activities";
    Vortrag: NanoTech 2002, Houston, Texas, USA; 09.09.2002 - 12.09.2002; in: "NanoTech 2002 At the Edge of Revolution", American Institute of Aeronautics and Astronautics, Reston, Va (2002), ISBN: 1-563-47551-0; S. 5.

    Zusätzliche Informationen

  33. Autor/innen: Rene Nagel, ARC; Rudolf Zauner, AMAT

    R. Nagel, R. Zauner:
    "Powder Injection Moulding of High Performance Ceramic Metal Composites (Cermets)";
    Vortrag: EuroPM2004, Prague; 02.10.2005 - 05.10.2005; in: "EuroPM2004", Conference Proceedings European Powder Metallurgy Association, Vol. 3 Shrewsbury (2005), CD-ROM.

  34. Autor/innen: Erich Neubauer, PTC; Ivica Smid, ARC; Gottfried Kladler, AMAT [(keine)]; Georg Korb, PTC; Christoph Eisenmenger-Sittner, ARC; Herwig Bangert, ARC

    E. Neubauer, I. Smid, G. Kladler, G. Korb, Ch. Eisenmenger-Sittner, H. Bangert:
    "The Influence of Alloying Elements (Cr and Ti) on the Thermal and Mechanical Characteristics of Copper-Carbon Composites based on Coated Carbon Fibers";
    Vortrag: PM2Tec Conference, Las Vegas, USA; 01.06.2003 - 30.06.2003; in: "PM2Tec Conference Proceedings of the PM2Tec Conference", xx, xx (2003), xx CD ROM.

  35. Autor/innen: Christa Nöhammer, HMD; Walter Grienauer, AMAT; R. Heer, HMD; M.J Vellekoop; Herbert Wiesinger-Mayr, HMD; Johannes Peham, HMD

    Ch. Nöhammer, W. Grienauer, R. Heer, M. Vellekoop, H. Wiesinger-Mayr, J. Peham:
    "Microdevices for molecular diagnostics";
    Poster: 3rd International Congress Nanotechnology in Medicine & Biology, Krems; 01.03.2012 - 02.03.2012; in: "Microdevices for molecular diagnostics", (2012).

  36. Autor/innen: Paul Nowakowski, AMAT [(keine)]; Manfred Brabetz, AMAT; K. Spiradek-Hahn, ADG; Günter Zeiler, Böhler

    P. Nowakowski, M. Brabetz, K. Spiradek-Hahn, G. Zeiler:
    "Microstructural evolution during creep of a new modified 9% Cr-steel with Boron and Cobalt";
    Vortrag: Xvth. Phys. Metall and Mater. Sci. Conf. - Advanced Materials and Technologies, Krakow-Krynica, Polen; 17.05.1998 - 21.05.1998; in: "Xvth. Phys. Metall and Mater. Sci. Conf. - Advanced Materials and Technologies", Inzyniera Materialiowa, Nr. 3 (1998), S. 225.

    Zusätzliche Informationen

  37. Autor/innen: Paul Nowakowski, AMAT [(keine)]; K. Spiradek-Hahn, ADG; Günter Zeiler, Böhler

    P. Nowakowski, K. Spiradek-Hahn, G. Zeiler:
    "Kriechverhalten und Mikrostruktur des neuen modifizierten 9%Cr-Stahl mit Kobalt und Bor für den Einsatz in kalorischen Kraftwerken";
    Vortrag: Werkstoffe und Schweißtechnik im Kraftwerk 1998, Hannover; 14.10.1998 - 15.10.1998; in: "Werkstoffe und Schweißtechnik im Kraftwerk 1998", VGB-Kraftwerkstechnik GmbH, Verlag technisch-wissenschaftliche Schriften, Essen (1998), 79.

  38. Autor/innen: Paul Nowakowski, AMAT [(keine)]; H. Straube, Vienna University of; K. Spiradek-Hahn, ADG; Günter Zeiler, Böhler

    P. Nowakowski, H. Straube, K. Spiradek-Hahn, G. Zeiler:
    "Microstructural evolution during creep of a new modified 9% Cr-steel with Boron and Cobalt";
    Vortrag: 6th Liege Conference on Materials for Advanced Power Engineering 1998, 1998; in: "6th Liege Conference on Materials for Advanced Power Engineering 1998 6th Liege Conference on Materials for Advanced Power Engineering 1998, Part I", Schriften des Forschungszentrum Jülich - Reihe Energietechnik, Vol.5, Part I (1998), ISSN: 1433-5522; S. 567.

    Zusätzliche Informationen

  39. Autor/innen: Andreas Pichler, ARC; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    A. Pichler, K. Spiradek-Hahn, M. Brabetz:
    "The Precipitation Sequence in Ti if Grades, a Key Factor Controlling the Properities";
    Vortrag: 2nd Int. Conference on Thermomechanical Processing of Steels. TMP 2004, Liege, Belgium; 15.06.2004 - 17.06.2004; in: "2nd Int. Conf. on Thermomechanical Processing of Steels. TMP 2004", Verlag Stahleisen, Düsseldorf (2004), ISBN: 3-514-00704-7; S. 434 - 441.

  40. Autor/innen: Sabrina Pottinger, AMAT; David Krejci, SPA; Carsten Scharlemann, SPA

    S. Pottinger, D. Krejci, C. Scharlemann:
    "Development of a PPT for CubeSat Applications";
    Vortrag: 44th Joint Propulsion Conference, Hartford; 2008; in: "AIAA-2008-4532", (2008).

  41. Autor/innen: F. Pregesbauer, ALT; Friedrich Rüdenauer, AMAT

    F. Pregesbauer, F. Rüdenauer:
    "Deconvolution of metal- and hydride overlap in SIMS spectra of stainless steel";
    Vortrag: 7. international vacuum congress and 3. international conference on solid surfaces., Vienna (Austria); 12.09.1977 - 16.09.1977; in: "7. international vacuum congress and 3. international conference on solid surfaces.", Vol. 3 (1977), S. 2539 - 2542.

  42. Autor/innen: F. Pregesbauer, ALT; Friedrich Rüdenauer, AMAT; W. Steiger

    F. Pregesbauer, F. Rüdenauer, W. Steiger:
    "Neutron dose determination in stainless steel by mass spectrometric measurement of stable-isotope abundance ratios";
    Vortrag: Symposium on atomic surface physics, Maria Alm (Austria); 10.02.1980 - 16.02.1980; in: "Symposium on atomic surface physics", (1980), S. 140 - 145.

  43. Autor/innen: E. Rauch; A. Sigmund; Ulrike Galovsky, AMAT

    E. Rauch, A. Sigmund, U. Galovsky:
    "Technische und betriebswirtschaftliche Aspekte des Inhouse Recycling von Mg-Legierungen";
    Vortrag: 1. Ranhofener Leichtmetalltage, Ranshofen; 2000; in: "1. Ranshofener Leichtmetalltage Vom Werkstoff zum Bauteilsystem", (2000), S. 147 - 154.

  44. Autor/innen: J. Romstedt, ESTEC/ESA; Friedrich Rüdenauer, AMAT; Michael Fehringer, W; A. Jäckel, Universität Münster

    J. Romstedt, F. Rüdenauer, M. Fehringer, A. Jäckel:
    "Simulation Experiments of a Dust-Collecting Surface for a Cometary Environment";
    Vortrag: 21st Annual Conference Meteoritical Society, La Jolla, California; 19.04.1999 - 22.04.1999; in: "21st Annual Conference Meteoritical Society", in print (1999), S. 2.

  45. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Concepts, applications and limits of 3D-SIMS";
    Vortrag: 11. international congress on x-ray optics and microanalysis., London, Ontario (Canada); 04.08.1986 - 08.08.1986; in: "11. international congress on x-ray optics and microanalysis.", (1987), S. 210 - 217.

  46. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Die Verwendung von Targetstrom, Sekundärelektronen und Sekundärionen zur Bildmodulation in einer computergesteuerten Ionenmikrosonde";
    Vortrag: 10. Kolloquium 'Metallkundliche Analyse', Vienna (Austria); 03.11.1980 - 06.11.1980; in: "10. Kolloquium 'Metallkundliche Analyse'", (1980).

  47. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Hochaufgelöste 3-dimensionale Elementverteilung in Festkörpern";
    Vortrag: Jahrestagung 1985 der Österreichischen, Deutschen und Schweizer Gesellschaft für Elektronenmikroskopie., Konstanz (Germany, F.R.); 16.09.1985 - 21.09.1985; in: "Jahrestagung 1985 der Österreichischen, Deutschen und Schweizer Gesellschaft für Elektronenmikroskopie.", (1985).

  48. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Messung der räumlich 3-dimensionalen Elementverteilung in Festkörpern mit Hilfe von SIMS";
    Vortrag: COMPANA '85, Jena (Germany, D.R.); 08.09.1985 - 15.09.1985; in: "COMPANA '85", (1986), S. 111 - 118.

  49. Autor/in: Friedrich Rüdenauer, AMAT

    F. Rüdenauer:
    "Sputter redeposition as a limit to spatially 3-dimensional SIMS microanalysis";
    Vortrag: 21. annual conference of the Microbeam Analysis Society (EMSA/EMAS-meeting). ]-in print-, Albuquerque (USA); 11.08.1986 - 15.08.1986; in: "21. annual conference of the Microbeam Analysis Society (EMSA/EMAS-meeting). ]-in print-", (1986).

  50. Autor/innen: Friedrich Rüdenauer, AMAT; Michael Fehringer, W; Wolfgang Steiger, AMAT

    F. Rüdenauer, M. Fehringer, W. Steiger:
    "Application of Indium Field Ion Emitters in Space";
    Vortrag: 2nd European Field Emission Workshop EF99, Toledo, Spanien; 14.11.1999 - 19.11.1999; in: "2nd European Field Emission Workshop EF99", (1999).

  51. Autor/innen: Friedrich Rüdenauer, AMAT; Michael Fehringer, W; Klaus Torkar, ARC

    F. Rüdenauer, M. Fehringer, K. Torkar et al.:
    "Spacecraft Potential Control Using Indium Ion Sources.";
    Vortrag: Proc. 6th Spacecraft Charging Conference, Hanscom Field, Lexington; 02.11.1998 - 06.11.1998; in: "Proc. 6th Spacecraft Charging Conference", (1998), S. 6.

  52. Autor/innen: Friedrich Rüdenauer, AMAT; M. Riedel, Eoetvoes Lorand Tudo; H.E. Beske, ALT [Eoetvoes Lorand ...]; H. Düsterhöft, ALT [Eoetvoes Lorand ...]; J. Giber, ALT; H. Mai, ALT [Eoetvoes Lorand ...]; O. Richter; S. Stingeder, ALT

    F. Rüdenauer, M. Riedel, H.E. Beske, H. Düsterhöft, J. Giber, H. Mai, O. Richter, S. Stingeder:
    "Beszamolo a SIMS Keszülekek oeszehangolasara lefolytatott un. Cross Calibration experimentroel";
    Vortrag: 28. Hungarian spectroscopy conference, Budapest (Hungary); 22.06.1985 - 25.06.1985; in: "28. Hungarian spectroscopy conference", (1985), S. 53 - 56.

  53. Autor/innen: Friedrich Rüdenauer, AMAT; Günther Stangl, TU Wien, IAEE

    F. Rüdenauer, G. Stangl:
    "Herstellung photolithographischer DUV-Arbeitsmasken mittels schreibender und projizierender Ionenimplantation";
    Vortrag: VDI-Tagung 'Maskentechnologie', Munich (Germany, F.R.); 13.11.1985 - 15.11.1985; in: "VDI-Tagung 'Maskentechnologie'", (1985).

  54. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger

    F. Rüdenauer, W. Steiger:
    "Quantitative SIMS analysis on nonplanar surfaces";
    Vortrag: 7. international vacuum congress and 3. international conference on solid surfaces., Vienna (Austria); 12.09.1977 - 16.09.1977; in: "7. international vacuum congress and 3. international conference on solid surfaces.", Vol. 3 (1977), S. 2535 - 2538.

  55. Autor/innen: Friedrich Rüdenauer, AMAT; W. Steiger

    F. Rüdenauer, W. Steiger et al.:
    "Cross-calibration of SIMS instruments for analysis of metals and semiconductors";
    Vortrag: 5. international conference on secondary ion mass spectrometry (SIMS V)., Berlin (Germany, F.R.); 30.09.1985 - 04.10.1985; in: "5. international conference on secondary ion mass spectrometry (SIMS V).", (1986), S. 118 - 120.

  56. Autor/innen: Erhard Schafler, ARC; Leonhard Zeipper, AMAT [(keine)]; Michael Zehetbauer, ARC

    E. Schafler, L. Zeipper, M. Zehetbauer:
    "X-Ray Profile Analysis of Severely Plastically Deformed Titanium";
    Vortrag: 2nd Int. Conference on Nanomaterials by Severe Plastic Deformation, Vienna; 09.12.2002 - 13.12.2002; in: "2nd Int. Conference on Nanomaterials by Severe Plastic Deformation", (2004), SPD2; S. 426 - 432.

  57. Autor/innen: Carsten Scharlemann, SPA; Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Reinhard Schnitzer, AMAT; Martin Tajmar, SPA; Helmut Früholz, Astrium; Rainer Killinger, Astrium Space Transp

    C. Scharlemann, A. Genovese, Buldrini Nembo, R. Schnitzer, M. Tajmar, H. Früholz, R. Killinger:
    "Indium FEEP Micropropulsion Qualification Test Program for LISA Pathfinder";
    Vortrag: Proceedings of the 5th International Space Propulsion Conference, Heraklion; 05/2008; in: "Proceedings of the 5th International Space Propulsion Conference", (2008).

  58. Autor/innen: Carsten Scharlemann, SPA; Klaus Marhold, AMAT; Martin Tajmar, SPA; Pierpaolo Miotti , ARC; C. Guraya, INASMET; F. Seco, INASMET; A. Soldati, ARC; M. Campolo, University of Udine; F. Perennes, ARC; Benedetta Marmiroli , ARC; R. Brahmi, LACCO; C. Kappenstein, LACCO; M. Lang, ESA

    C. Scharlemann, K. Marhold, M. Tajmar, P. Miotti , C. Guraya, F. Seco, A. Soldati, M. Campolo, F. Perennes, B. Marmiroli , R. Brahmi, C. Kappenstein, M. Lang:
    "Turbo-Pump Fed Miniature Rocket Engine";
    Vortrag: 41th Joint Propulsion Conference, Tucson, Arizona; 10.07.2005 - 13.07.2005; in: "41th Joint Propulsion Conference", American Institute of Aeronautics and Astronautics, Reston, Va, (2005), Paper No.: AIAA-2005-3654; S. 3654.

  59. Autor/innen: Michael Scheerer, AAC; Thomas Goss, AMAT [(keine)]; Peter Alexander Hahn, AMAT; Alfred Karlovsky, AMAT; Michael Marischler, AMAT; Anneliese Pönninger, AAC; Richard Wagner, AAC; Klaus Brunnhofer, MAGNA STEYR; Elisabeth Ladstätter, FACC

    M. Scheerer, T. Goss, P. Hahn, A. Karlovsky, M. Marischler, A. Pönninger, R. Wagner, K. Brunnhofer, E. Ladstätter:
    "Enhanced Damage and Life Time Prognosis of CFRP- Structures by means of Combined Time-Frequency-Based Acoustic Emission Feature Extraction and FBG Spectrum Analysis";
    Vortrag: Fourth European Workshop on Structural Health Monitoring, Krakow, Poland; 02.07.2008 - 04.07.2008; in: "Proceedings of the Fourth European Workshop STRUCTURAL HEALTH MONITORING 2008", (2008), S. 1186 - 1194.

  60. Autor/innen: Christoph Schmidt, AMAT [(keine)]; F. Altmann; G. Mutinati, HMD; E. Brunet, HMD; S. Steinhauer, HMD; A. Köck, HMD; M. Siegele; C. Gamauf; A. Nemecek; J. Teva; J. Kraft; J. Siegert; F Schrank; H. Kruschke

    Ch. Schmidt, F. Altmann, G. Mutinati, E. Brunet, S. Steinhauer, A. Köck, M. Siegele, C. Gamauf, A. Nemecek, J. Teva, J. Kraft, J. Siegert, F. Schrank, H. Kruschke:
    "Thermal Investigations on CMOS Integrated Micro-hot-plates Using IR Thermography";
    Poster: ISTFA 2012, Phoenix, Arizona, USA; 11.11.2012 - 15.11.2012; in: "ISTFA 2012: Conference Proceedings from the 38th International Symposium for Testing and Failure Analysis", (2012), S. 592 - 595.

  61. Autor/innen: Javier Segurado, AMAT; Heinz Pettermann, ARC; Andreas Merstallinger, AAC

    J. Segurado, Heinz Pettermann, A. Merstallinger:
    "Numerical simulations in tribology - A Micro-mechanics of materials approach";
    Vortrag: World Tribology Congress, Vienna; 04.09.2001 - 05.09.2001; in: "World Tribology Congress", Eigenverlag, Wien (2001), ISBN: 3-901657-08-8; S. 5.

  62. Autor/innen: Roman Sonnleitner, AMAT [(keine)]; K. Spiradek-Hahn, ADG; Francois Rossi, ARC

    R. Sonnleitner, K. Spiradek-Hahn, F. Rossi:
    "Microstructure of plasma nitrided layers on Al-alloys";
    Vortrag: 5th International Workshop on Plasma-Based Ion Implantation (PBII-2001), Grenoble; 26.06.2001 - 28.06.2001; in: "5th International Workshop on Plasma-Based Ion Implantation (PBII-2001)", (2001), to be published to be published; S. 2.

  63. Autor/innen: K. Spiradek-Hahn, ADG; Paul Nowakowski, AMAT [(keine)]; Günter Zeiler, Böhler

    K. Spiradek-Hahn, P. Nowakowski, G. Zeiler:
    "Borlegierte Werkstoffe für den Einsatz in modernen thermischen Kraftwerken";
    Vortrag: Werkstoffe für die Kraftwerkstechnik an der Schwelle zum 21. Jahrhundert, TU Graz; 16.04.1999 - 16.04.1999; in: "Werkstoffe für die Kraftwerkstechnik an der Schwelle zum 21. Jahrhundert Borlegierte Werkstoffe für den Einsatz in modernen thermischen Kraftwerken", Tagungsband der 6. Werkstofftagung TU Graz, (1999), S. 1 - 12.

    Zusätzliche Informationen

  64. Autor/innen: K. Spiradek-Hahn, ADG; Paul Nowakowski, AMAT [(keine)]; Günter Zeiler, Böhler

    K. Spiradek-Hahn, P. Nowakowski, G. Zeiler:
    "Boron added 9%Cr steels for forged components in advanced power plants";
    Vortrag: 3rd EPRI conference on Advancees in Materials Technology for Fossil Power Plants, Swansea; 01.04.2001 - 06.04.2001; in: "3rd EPRI conference on Advancees in Materials Technology for Fossil Power Plants", (2001), 1; S. 2.

  65. Autor/innen: E. Stangl, W; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    E. Stangl, K. Spiradek-Hahn, M. Brabetz:
    "TEM Investigations of Galvannealed Steel Sheets";
    Vortrag: Proceedings International Symposium on Zinc-Based Steel Coating Systems: Production and Performance, San Antonio, Texas, USA; 16.02.1998 - 19.02.1998; in: "Proceedings International Symposium on Zinc-Based Steel Coating Systems: Production and Performance", (1998), S. 165 - 172.

  66. Autor/innen: Günther Stangl, TU Wien, IAEE; Friedrich Rüdenauer, AMAT; J. Mitterauer, ALT; Z. Szalmassy, ALT; Wolfgang Fallmann, TU Wien, IAEE

    G. Stangl, F. Rüdenauer, J. Mitterauer, Z. Szalmassy, W. Fallmann:
    "Fabrication of UV-photomasks by writing ion beam implantation";
    Vortrag: Microcircuit engineering '83, Cambridge (United Kingdom); 26.09.1983 - 29.09.1983; in: "Microcircuit engineering '83", (1983).

  67. Autor/innen: Wolfgang Steiger, AMAT; Angelo Genovese, AMAT; Martin Tajmar, SPA

    W. Steiger, A. Genovese, M. Tajmar:
    "Austrian Research Centers Seibersdorf Electric Propulsion Research";
    Vortrag: In-Space Electric Propulsion Diagnostics Conference, Boston, USA; 20.11.2000 - 21.11.2000; in: "In-Space Electric Propulsion Diagnostics Conference", (2000), S. 32.

  68. Autor/innen: Wolfgang Steiger, AMAT; Angelo Genovese, AMAT; Martin Tajmar, SPA

    W. Steiger, A. Genovese, M. Tajmar:
    "Micronewton Indium FEEP Thrusters";
    Vortrag: 3rd European Spacecraft Propulsion Conference, Cannes, France; 10.10.2000 - 13.10.2000; in: "3rd European Spacecraft Propulsion Conference", (2000), S. 8.

  69. Autor/innen: W. Steiger; Friedrich Rüdenauer, AMAT

    W. Steiger, F. Rüdenauer:
    "Quantitative evaluation of SIMS spectra including spectrum interpretation an Saha-Eggert correction";
    Vortrag: 7. international conference on mass spectrometry, Florence (Italy); 30.08.1976 - 03.09.1976; in: "7. international conference on mass spectrometry", (1976), S. 770 - 775.

  70. Autor/innen: Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Krzysztof Bryla, ARC; Günter Zeiler, Böhler

    Ch. Stocker, K. Spiradek-Hahn, Krzysztof Bryla, G. Zeiler:
    "Microstructural Evolution During Creep and Comparison of the Creep Behaviour of the New Modified 9%Cr-Steels with Addition of Co and/or B";
    Vortrag: 10th Creep & Fracture of Engineering Materials and Structures, Prague, Czech Republic; 08.04.2001 - 11.04.2001; in: "10th Creep & Fracture of Engineering Materials and Structures", (2001), 1; S. 10.

  71. Autor/innen: Vladimir Stolyarov, AMAT; Ruslan Valiev, ARC; Leonhard Zeipper, AMAT [(keine)]; Georg Korb, PTC

    V. Stolyarov, R. Valiev, L. Zeipper, G. Korb:
    "Extraordinary properties of bulk ultrafine-grained CP Ti processed by severe plastic deformation";
    Vortrag: Ti-2003 Conference, Hamburg; 13.07.2003 - 18.07.2003; in: "Ti-2003 Conference", Wiley - VCH, Weinheim (2004), ISBN: 3-527-30306-5; S. 1437 - 1444.

  72. Autor/innen: Martin Tajmar, SPA; Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Wolfgang Steiger, AMAT

    M. Tajmar, A. Genovese, Buldrini Nembo, W. Steiger:
    "Miniaturized Indium-FEEP Multiemitter Design and Performance";
    Vortrag: NanoTech 2002, Houston, Texas, USA; 09.09.2002 - 12.09.2002; in: "NanoTech 2002 At the Edge of Revolution", American Institute of Aeronautics and Astronautics, Reston, Va. (2002), ISBN: 1-563-47551-0; S. 5.

  73. Autor/innen: Martin Tajmar, SPA; Angelo Genovese, AMAT; Wolfgang Steiger, AMAT

    M. Tajmar, A. Genovese, W. Steiger:
    "Experimental Characterisation of Indium FEEP Microthruster";
    Vortrag: NASA/JPL/MSFC/UAH 12th Annual Advanced Space Propulsion Workshop, USA; 01.04.2001 - 30.04.2001; in: "NASA/JPL/MSFC/UAH 12th Annual Advanced Space Propulsion Workshop", (2001), unbekannt; S. 8.

  74. Autor/innen: Martin Tajmar, SPA; Klaus Hense, AMAT [(keine)]; Klaus Marhold, AMAT; ClovisJ. De Matos, ARC

    M. Tajmar, K. Hense, K. Marhold, C.J. De Matos:
    "Weight Measurements of High-Temperature Superconductors during Phase Transition in Stationary, Non-Stationary Condition and under ELF Radiation";
    Vortrag: STAIF-2005, Albuquerque, New Mexiko; 13.02.2005 - 17.02.2005; in: "STAIF-2005 Proceedings of the Space Technology and Applications International Forum", Series: AIP conference proceedings American Institute of Physics, Nr. 746 Melville, N.Y. (2005), ISBN: 0735402302; S. 1290 - 1297.

  75. Autor/innen: Martin Tajmar, SPA; Walter Meissl, AMAT [(keine)]; J. Gonzalez del Amo, ARC; Bernhard Foing, ESA/ESTEC; H. Lassko, ESA-ESTEC; G. Noci, ARC; M. Capacci, ARC; A. Mälkki, Finnish Meteorologic; P. Schmidt, AMAT; F. Darnon, CNES

    M. Tajmar, W. Meissl, J. Gonzalez del Amo, B. Foing, H. Lassko, G. Noci, M. Capacci, A. Mälkki, P. Schmidt, F. Darnon:
    "Charge-Exchange Plasma Contamination on SMART-1: First Measurements and Model Verification";
    Vortrag: 40th AIAA Joint- Propulsion- Conference, Fort Lauderdale, FL.; 12.07.2004 - 14.07.2004; in: "40th AIAA Joint- Propulsion- Conference", American Institute of Aeronautics and Astronautics, Reston, Va. (2004), - AIAA-2004-3437; S. 12.

  76. Autor/innen: Martin Tajmar, SPA; Friedrich Rüdenauer, AMAT; Michael Fehringer, W

    M. Tajmar, F. Rüdenauer, M. Fehringer:
    "Backflow Contamination of Indium Liquid Metal Ion Emitters (LMIE): Numerical Simulations";
    Vortrag: 26th International Electric Propulsion Conference, Kitakyushu, Japan; 17.10.1999 - 21.10.1999; in: "26th International Electric Propulsion Conference", to be published in "Jap. Soc. Aeron. Space Sc", 1999, (1999), S. 8.

  77. Autor/innen: Martin Tajmar, SPA; Wolfgang Steiger, AMAT; Angelo Genovese, AMAT

    M. Tajmar, W. Steiger, A. Genovese:
    "Indium FEEP Thruster Beam Diagnostics, Analysis and Simulation";
    Vortrag: AIAA Joint Propulsion Conference, Salt Lake City; 07.07.2001 - 12.07.2001; in: "AIAA Joint Propulsion Conference", (2001), 2001-3790; S. 7.

  78. Autor/innen: Thomas Thenikl, AMAT; K. Spiradek-Hahn, ADG; Aleksandr Czyrska-Filemonowicz , ARC

    T. Thenikl, K. Spiradek-Hahn, Czyrska-Filemonowicz:
    "TEM ivestigations of the microstructure of surface treated ti-based alloys for prosthesis applications";
    Vortrag: 17th European Conference on Biomaterials including the Second Young Scientists Forum on Biomaterials, Barcelona; 11.09.2002 - 14.09.2002; in: "17th European Conference on Biomaterials including the Second Young Scientists Forum on Biomaterials ESB 2002", (2002), 1; S. 1.

  79. Autor/innen: Klaus Torkar, ARC; Michael Fehringer, W; H. Arends, ARC; R. Goldstein, JPL, Pasadena, USA; R.J.L. Grard, ESTEC/ESA; B.T. Narheim, ARC; R.C. Olsen, Naval Postgraduate S; A. Pedersen, ESTEC/ESA; W. Riedler, ARC; Friedrich Rüdenauer, AMAT; P. Schmidt, AMAT; Knut Svenes, ARC; E. Whipple, University of Seattl; R. Torbert, University of New Ha; Haofeng Zhao , ARC

    K. Torkar, M. Fehringer, H. Arends, R. Goldstein, R.J.L. Grard, B.T. Narheim, R.C. Olsen, A. Pedersen, W. Riedler, F. Rüdenauer, P. Schmidt, K. Svenes, E. Whipple, R. Torbert, H. Zhao :
    "Spacecraft Potential Control Using Indium Ion Sources - Experience and Outlook Based on Six Years of Operation in Space";
    Vortrag: 6th Spacecraft Charging Technology Conference, Hanscom, Massachusetts, USA; 1999; in: "6th Spacecraft Charging Technology Conference in press", (1999), S. 6.

  80. Autor/innen: Rick Toth , ARC; Ivica Smid, ARC; A. Sherman, ARC; Peter Ettmayer, ARC; Gottfried Kladler, AMAT [(keine)]; Georg Korb, PTC

    R. Toth , I. Smid, A. Sherman, P. Ettmayer, G. Kladler, G. Korb:
    "Tough-Coated Hard Powders for Hard Metals of Novel Properties";
    Vortrag: 15th International Plansee Seminar, Reutte; 01.05.2001 - 31.05.2001; in: "15th International Plansee Seminar 15th International Plansee Seminar", (2001), Vol. 2; S. 306 - 325.

  81. Autor/innen: Rick Toth , ARC; Ivica Smid, ARC; A. Sherman, ARC; Peter Ettmayer, ARC; Gottfried Kladler, AMAT [(keine)]; Georg Korb, PTC

    R. Toth , I. Smid, A. Sherman, P. Ettmayer, G. Kladler, G. Korb:
    "Tough-Coated Hard Powders for Hard Metals of Novel Properties";
    Vortrag: 2001 International Conference on Powder Metallurgy & Particulate Materials, New Orleans; 13.05.2001 - 17.05.2001; in: "2001 International Conference on Powder Metallurgy & Particulate Materials", (2001), to be published late 2001; S. 20.

  82. Autor/innen: Vasiljevich Ivanhoe, SPA; Martin Tajmar, SPA; Walter Grienauer, AMAT; Florin Plesescu, AMAT [(keine)]; Buldrini Nembo, AMAT; Jose Gonzales del Amo, ESA; Bernardo Carnicero-Dominguez, ESA; Maurizio Betto, ESA

    Vasiljevich Ivanhoe, M. Tajmar, W. Grienauer, F. Plesescu, Buldrini Nembo, J. Gonzales del Amo, B. Carnicero-Dominguez, M. Betto:
    "Development of an Indium mN-FEEP Thruster";
    Vortrag: AIAA Joint Propulsion Conference, Hartford; 2008; in: "AIAA-2008-4534", (2008).

  83. Autor/innen: Georg Waldner, ERT; Olivier Lorret, AMAT

    G. Waldner, O. Lorret:
    "The redox system resazurin/glycerol: a new model contaminant for standardization of thin-film photocatalytic activity";
    Vortrag: 2nd bilateral CZ-A scientific workshop: recent advances in photochemistry, electrochemistry and photocatalysis, Hnanice, Czech Republic; 04.12.2007 - 06.12.2007; in: "Recent advances in photochemistry, electrochemistry and photocatalysis", (2007), ISBN: 978-80-7080-680-7; S. 21 - 22.

  84. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, 1st International Conference Micro- and Nano-Technology, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "Viennano 05, 1st International Conference Micro- and Nano-Technology", ÖTG, Wien (2005), ISBN: 3-901657-17-7; S. 8.

  85. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, 1st International Conference Micro- and Nano-Technology, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "Viennano 05, 1st International Conference Micro- and Nano-Technology", ÖTG, Wien (2005), ISBN: 3-901657-17-7; S. 8.

  86. Autor/innen: Hui Yu, AMAT; Erich Neubauer, PTC; Paul Angerer, AMAT; Rudolf Zauner, AMAT

    H. Yu, E. Neubauer, P. Angerer, R. Zauner:
    "Investigation of Microstructure and composition of coated diamonds used in diamond based composites";
    Poster: PM Asia 2007 Conference & Exhibition, Shanghai; 02.04.2007 - 04.04.2007; in: "PMAsia 2007", (2007), S. 614 - 620.

  87. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Micro Powder Injection Moulding";
    Vortrag: Dornbirner Mikrotage, Dornbirn; 30.05.2006 - 31.05.2006; in: "Dornbirner Mikrotage", (2006), CD.

  88. Autor/innen: Rudolf Zauner, AMAT; Alexander Altenburger, AMAT

    R. Zauner, A. Altenburger:
    "PIM of Tungsten Divertor Modules for ITER Fusion Reactor";
    Vortrag: Powder Injection Molding Conference PIM 2006, Tampa, Florida; 19.03.2006 - 22.03.2006; in: "Powder Injection Molding Conference PIM 2006", PIM2006, Vol 1 (2006), S. 241 - 250.

  89. Autor/innen: Rudolf Zauner, AMAT; Atre Sundar, ARC; Carl Wu, Oregon State Univers; Jin Park Seong, ARC; Randall German , ARC; Hwang Chul Jin, KITECH, Korea Instit

    R. Zauner, Atre Sundar, C. Wu, J. Park Seong, R. German , Hwang Chul Jin:
    "Technical and Economical Comparison of Micro Powder Injection Molding";
    Vortrag: Powder Injection Molding Conference PIM 2006, Tampa, Florida; 19.03.2006 - 22.03.2006; in: "Powder Injection Molding Conference PIM 2006", PIM2006, Vol. 1 (2006), S. 41 - 50.

  90. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC; Donald Heaney, Center for Innovativ

    R. Zauner, Binet Chantal, D. Heaney:
    "Simulation of Binder Burnout and Internal Pressure Build-up During Thermal Debinding";
    Vortrag: 16th International Plansee Seminar, Reutte, Tirol; 01.05.2005 - 31.05.2005; in: "16th International Plansee Seminar", Plansee AG, Reutte/Tirol (2005), keine Vol. 1; S. 648 - 659.

  91. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC; Donald Heaney, Center for Innovativ; Georg Korb, PTC

    R. Zauner, Binet Chantal, D. Heaney, G. Korb:
    "Powder and feedstock property variations and their influence on the precision of PIM components";
    Vortrag: European Powder Metallurgy Conference, Valencia, Spain; 20.10.2003 - 22.10.2003; in: "European Powder Metallurgy Conference EURO PM 2003", European Powder Metallurgy Association, Vol. 3 Valencia, Spain (2003), ISBN: 1899072179; S. 167 - 172.

  92. Autor/innen: Rudolf Zauner, AMAT; Walter Grienauer, AMAT; Georg Korb, PTC

    R. Zauner, W. Grienauer, G. Korb:
    "Rapid Tooling for PIM";
    Vortrag: PM2Tec 2004 World Congress on Powder Metallurgy and Particulate Materials, Wien; 17.10.2004 - 21.10.2004; in: "PM2Tec 2004 World Congress on Powder Metallurgy and Particulate Materials", EURO PM 2004 European Powder Metallurgy Association, Vol.4 Shrewsbury (2004), S. 409 - 414.

  93. Autor/innen: Rudolf Zauner, AMAT; Georg Korb, PTC

    R. Zauner, G. Korb:
    "Micro Powder Injection Molding of Microstructured Components";
    Vortrag: 16th International Plansee Seminar, Reutte, Tirol; 01.05.2005 - 31.05.2005; in: "16th International Plansee Seminar", Plansee AG, Reutte/Tirol (2005), keine Vol. 2; S. 59 - 68.

  94. Autor/innen: Rudolf Zauner, AMAT; Jin Park Seong, ARC; Randall German , ARC; Atre Sundar, ARC; Taek Chung Sung, ARC

    R. Zauner, J. Park Seong, R. German , Atre Sundar, T. Chung Sung:
    "Sensitivity Analysis of 316L Stainless Steel During Packing and Cooling Stage in Powder Injection Molding";
    Vortrag: Powder Injection Molding Conference PIM, Orlando; 21.03.2004 - 24.03.2004; in: "Powder Injection Molding Conference PIM", (2004), -.

  95. Autor/innen: Günter Zeiler, Böhler; W. Meyer, Böhler; K. Spiradek-Hahn, ADG; Christian Stocker, AMAT

    G. Zeiler, W. Meyer, K. Spiradek-Hahn, Ch. Stocker:
    "9-12% Chromium steel forgings for power generation plants - experiences in manufacturing and long-term mechanical & microstructural testing";
    Vortrag: 15th International Forgemasters Meeting IFM 2003 Japan, Kobe City, Japan; 26.10.2003 - 29.10.2003; in: "15th International Forgemasters Meeting IFM 2003 Japan", (2003), -; S. 248 - 256.

  96. Autor/innen: Günter Zeiler, Böhler; W. Meyer, Böhler; K. Spiradek-Hahn, ADG; Christian Stocker, AMAT

    G. Zeiler, W. Meyer, K. Spiradek-Hahn, Ch. Stocker:
    "9-12% Chromium steel forgings for power generation plants - experiences in manufacturing and long-term mechanical & microstructural testing";
    Vortrag: 15th International Forgemasters Meeting IFM 2003 Japan, Kobe City, Japan; 26.10.2003 - 29.10.2003; in: "15th International Forgemasters Meeting IFM 2003 Japan", (2003), -; S. 248 - 256.

  97. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Gerald Gemeinböck, AMAT; Georg Korb, PTC; Michael Zehetbauer, ARC; Erhard Schafler, ARC; Bernhard Mingler, HBS

    L. Zeipper, G. Gemeinböck, G. Korb, M. Zehetbauer, E. Schafler, B. Mingler:
    "Nanostructuring of Titanium Based Materials by Severe Plastic Deformation - Fundamentals and Application";
    Vortrag: Titan 2003 - Science and Technology, Hamburg / Germany; 2004; in: "Titan 2003 - Science and Technology", VCH Verlag, Weinheim (2004), ISBN: 3-527-30306-5; S. 1445 - 1452.

  98. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Gerald Gemeinböck, AMAT; Michael Zehetbauer, ARC; Georg Korb, PTC

    L. Zeipper, G. Gemeinböck, M. Zehetbauer, G. Korb:
    "Compression Tests to approximate the ECAP Deformation and Post-Processing of coarse-grained and nanoSPD grade 2 Titanium";
    Vortrag: Ultrafine Graines Materials III, North Carolina, USA; 14.03.2004 - 18.03.2004; in: "Ultrafine Graines Materials III", Minerals, Metals & Materials Society, Warrendale, P. (2004), ISBN: 0-87339-571-9; S. 541 - 546.

  99. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Erhard Schafler, ARC; Stegelmann, Institute of Materia; Michael Zehetbauer, ARC; T. Ungar, Institute for Genera; Ruslan Valiev, ARC

    L. Zeipper, E. Schafler, Stegelmann, M. Zehetbauer, T. Ungar, R. Valiev:
    "Mechanical Properties and Internal Structural Parameters of Nanostructured Cu from High Pressure Torsion";
    Vortrag: 51. Jahrestagung der Österreichischen Physikalischen Gesellschaft, TU Wien; 17.09.2001 - 21.09.2001; in: "51. Jahrestagung der Österreichischen Physikalischen Gesellschaft", (2001), 1; S. 1.

  100. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Vladimir Stolyarov, AMAT; A. Korznikov, AMAT; Michael Zehetbauer, ARC

    L. Zeipper, V. Stolyarov, A. Korznikov, M. Zehetbauer:
    "New Properties of nano-scaled bulk Aluminium & Titanium for structural Use (nanospd-materials)";
    Vortrag: 7th International Conference on Nanostructured Materials, Wiesbaden/Germany; 20.06.2004 - 24.06.2004; in: "7th International Conference on Nanostructured Materials Last minute contributions", DECHEMA, Frankfurt am Main (2004), -.

  101. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Michael Zehetbauer, ARC; Hans Peter Karnthaler, Institut für Materia; R. Pippan, Erich Schmid Institu; H.P. Stüwe, Erich Schmid Institu; Georg Korb, PTC; Wolfgang Lacom, AMAT; Erich Kny, W

    L. Zeipper, M. Zehetbauer, H.P. Karnthaler, R. Pippan, H.P. Stüwe, G. Korb, W. Lacom, E. Kny:
    "Severe Plastic Deformation - an Access to Bulk Nanocrystalline Materials";
    Vortrag: Mit Term Meeting and Workshop on Nanomaterials: Fundamentals and Applications, Limerick / Ireland; 03.10.2001 - 06.10.2001; in: "Mit Term Meeting and Workshop on Nanomaterials: Fundamentals and Applications", (2001), 1; S. 3.

  102. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Michael Zehetbauer, ARC; Georg Korb, PTC; Erhard Schafler, ARC; Karnthaler Hans-Peter, Univ. Wien

    L. Zeipper, M. Zehetbauer, G. Korb, E. Schafler, Karnthaler Hans-Peter:
    "Mechanical Properties of severely plastically deformed Titanium";
    Vortrag: Nanomaterials by Severe Plastic Deformation, Vienna; 09.12.2002 - 13.12.2002; in: "Nanomaterials by Severe Plastic Deformation Proceedings Conference Nanomaterials by Severe Plastic Deformation, NANOSPD 2", Wiley-VCH-Verlag, Weinheim (2004), ISBN: 3-527-30659-5.

  103. Autor/innen: Leonhard Zeipper, AMAT [(keine)]; Michael Zehetbauer, ARC; Bernhard Mingler, HBS; Erhard Schafler, ARC; Georg Korb, PTC; Karnthaler Hans-Peter, Univ. Wien

    L. Zeipper, M. Zehetbauer, B. Mingler, E. Schafler, G. Korb, Karnthaler Hans-Peter:
    "Mechanical Properties of nanoSPD Titanium";
    Vortrag: 2nd Int. Conference on Nanomaterials by Severe Plastic Deformation, Vienna; 09.12.2002 - 13.12.2002; in: "2nd Int. Conference on Nanomaterials by Severe Plastic Deformation", (2004), SPD2; S. 810 - 816.

  104. Autor/innen: Zhilinska Natalja, ARC; Zalite Ilmars, ARC; A. Krumina, TU Riga; Walter Constin, AMAT; Grazyna Mozdzen, AAC

    Zhilinska Natalja, Zalite Ilmars, A. Krumina, W. Constin, G. Mozdzen:
    "Sintern der Materialien auf der Basis unterschiedlicher Si3N4-Pulver";
    Vortrag: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien; 02.07.2003 - 04.07.2003; in: "14. Symposium Verbundwerkstoffe", Wiley-VCH, Weinheim (2003), ISBN: 3-527-30762-1; S. 399 - 404.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


  1. Autor/innen: Ana Almansa, ARC; Silvia Bou, AMAT

    A. Almansa, S. Bou:
    "ASSEMIC: A European Research and Training Network for Advanced Post-graduate Education";
    Vortrag: IEEE-ICIT04 International Confernce on Industrial Technology, Hammamet/Tunesien; 08.12.2004 - 10.12.2004.

  2. Autor/innen: Ana Almansa, ARC; Silvia Bou, AMAT

    A. Almansa, S. Bou:
    "First research achievements of the project ASSEMIC on Microhandling and -assembly technologies";
    Vortrag: IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Monterey/USA; 24.07.2005 - 28.07.2005.

  3. Autor/innen: Ana Almansa, ARC; Silvia Bou, AMAT

    A. Almansa, S. Bou:
    "First research achievements of the projekt ASSEMIC on Microhandling and -assembly technologies";
    Vortrag: IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2005), Monterey/USA; 24.07.2005 - 28.07.2005.

  4. Autor/innen: Ana Almansa, ARC; Silvia Bou, AMAT; D. Fratila, AMAT

    A. Almansa, S. Bou, D. Fratila:
    "Micro handling and Assembly: Project ASSEMIC";
    Vortrag: The 3rd International Precision Assembly Seminar (IPAS 2006), Bad Hofgastein; 19.02.2006 - 22.02.2006.

  5. Autor/innen: Habib Amir, AMAT; Roland Haubner, Vienna University of; Nils Stelzer, PTC

    H. Amir, R. Haubner, N. Stelzer:
    "Effect of Temperature, Time and Particle Size of Ti-Precursor on Hydrothermal Synthesis of Barium Titanate";
    Vortrag: 4th International Workshop on "Nanosciences & Nanotechnologies - NN07", Thessaloniki; 16.07.2007 - 18.07.2007.

  6. Autor/innen: Habib Amir, AMAT; Nils Stelzer, PTC; Roland Haubner, Vienna University of

    H. Amir, N. Stelzer, R. Haubner:
    "Hydrothermal Synthesis of Barium Titanate - Temperature, Time and Particle Size of Ti-precursor Dependence";
    Vortrag: NANO AND PHOTONICS, Mauterndorf / Salzburg, Austria; 2006.

  7. Autor/innen: Paul Angerer, AMAT; Georg Korb, PTC

    P. Angerer, G. Korb:
    "Innovative Methoden für die Kompaktierung von konventionellen und nanostrukturierten Pulvern";
    Vortrag: ASMET Forum für Metallurgie und Werkstofftechnik 2004, Leoben; 01.08.2004 - 31.08.2004.

  8. Autor/innen: Paul Angerer, AMAT; Georg Korb, PTC; Yu Li Gen, School of Mechanical; Khor Khiam Aik, School of Mechanical; Sigrid Koetterl, ARCiNA, State Colleg

    P. Angerer, G. Korb, Yu Li Gen, Khor Khiam Aik, S. Koetterl:
    "Spark-Plasma-Sintering (SPS) of various conventional and nanostructured powders";
    Vortrag: Sintering 2003 Conference, State College, PA; 2003.

  9. Autor/innen: Paul Angerer, AMAT; Yu Li Gen, School of Mechanical; Khor Khiam Aik, School of Mechanical; Georg Korb, PTC; Zalite Ilmars, ARC

    P. Angerer, Yu Li Gen, Khor Khiam Aik, G. Korb, Zalite Ilmars:
    "Spark-Plasma-Sintering (SPS) of nanostructured Titanium Carbonitride Powders";
    Vortrag: ICAM 2003-MP3 Conference, Yokohama, Japan; 01.10.2003 - 31.10.2003.

  10. Autor/innen: Lubos Baca, PTC; Manfred Brabetz, AMAT; Nils Stelzer, PTC

    L. Baca, M. Brabetz, N. Stelzer:
    "Low temperature crystallization and morphology evolution of c-ZrO2 nanocrystals under hydrothermal conditions";
    Vortrag: Conference of European Ceramic Society, Berlin; 06/2007.

  11. Autor/innen: L. Beccai, ARTS Lab, Scuola Sup; S. Roccella, ARTS Lab, Scuola Sup; L. Ascari, IMT Lucca Institute ; P. Valdastri, ARC; A. Sieber, AMAT [(keine)]; M.C. Carrozza, ARTS Lab and CRIM La; P. Dario, ARC

    L. Beccai, S. Roccella, L. Ascari, P. Valdastri, A. Sieber, M.C. Carrozza, P. Dario:
    "Experimental analysis of a soft compliant tactile microsensor to be integrated in an anthropomorphic artificial hand";
    Vortrag: ESDA 2006, Turin; 2006.

  12. Autor/innen: Binet Chantal, ARC; Donald Heaney, Center for Innovativ; Piemme Jobe, AMAT; Rudolf Zauner, AMAT

    Binet Chantal, D. Heaney, Piemme Jobe, R. Zauner:
    "Statistical Study on Dimensional Variability of the Powder Injection Molding Process";
    Vortrag: Powder Injection Molding Conference PIM 2003, State College; 17.03.2003 - 19.03.2003.

  13. Autor/innen: Nikolaus Böck, AMAT; Franz Kager, ADG

    N. Böck, F. Kager:
    "Finite element simulation of the creep behaviour of 9% chromium steels based on micromechanical considerations";
    Vortrag: Materials Science & Technology Conference, Pittsburgh; 01.10.2005 - 31.10.2005.

  14. Autor/innen: Silvia Bou, AMAT; Ana Almansa, ARC

    S. Bou, A. Almansa:
    "Methods and tools for microassembly: A Survey";
    Vortrag: The 3rd International Precision Assembly Seminar (IPAS 2006), Bad Hofgastein; 19.02.2006 - 22.02.2006.

  15. Autor/innen: Silvia Bou, AMAT; Ana Almansa, ARC

    S. Bou, A. Almansa:
    "Multiporpuse Microhandling and Assembly Set-up";
    Vortrag: 5th International Workshop on Microfactories, Besancon; 2006.

  16. Autor/innen: Silvia Bou, AMAT; Ana Almansa, ARC

    S. Bou, A. Almansa:
    "Study on Microhandling and -assembly methods and tools within the Project ASSEMIC";
    Vortrag: ICIT 2004, Hammamet/Tunesien; 08.12.2004 - 10.12.2004.

  17. Autor/innen: Silvia Bou, AMAT; Ana Almansa, ARC; N. Balabanava, Warsaw University of; Z. Rymuza, Warsaw University of

    S. Bou, A. Almansa, N. Balabanava, Z. Rymuza:
    "Handling Processes in Microsystems Technology";
    Vortrag: IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Monterey/USA; 24.07.2005 - 28.07.2005.

  18. Autor/innen: Silvia Bou, AMAT; Ana Almansa, ARC; N. Balabanava, Warsaw University of; R. Zygmunt, Warsaw University of

    S. Bou, A. Almansa, N. Balabanava, R. Zygmunt:
    "Handling Processes in Microsystems Technology";
    Vortrag: EEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2005), Monterey/USA; 24.07.2005 - 28.07.2005.

  19. Autor/innen: Buldrini Nembo, AMAT; Angelo Genovese, AMAT; Martin Tajmar, SPA

    Buldrini Nembo, A. Genovese, M. Tajmar:
    "In-FEEP Cluster for LISA Pathfinder";
    Vortrag: 9th International Electric Propulsion Conference, Princeton University; 31.10.2005 - 04.11.2005.

  20. Autor/innen: Andreas Dedinak, AMAT; Helmut Haslinger, ARC

    A. Dedinak, H. Haslinger:
    "Beispiele für die Umsetzung industrieller Steuerungstechnik";
    Vortrag: ASMET Meeting Fachausschuss Mechatronik, Seibersdorf; 20.09.2004.

  21. Autor/innen: Andreas Dedinak, AMAT; Helmut Haslinger, ARC

    A. Dedinak, H. Haslinger:
    "Vertikale Integration von Produktionsprozessen";
    Vortrag: ASMET Meeting Fachausschuss Mechatronik, Seibersdorf; 20.09.2004.

  22. Autor/innen: Andreas Dedinak, AMAT; Sigrid Kötterl, AMAT; Christian Wögerer, Profactor; Helmut Haslinger, ARC

    A. Dedinak, S. Kötterl, C. Wögerer, H. Haslinger:
    "Integrated vertical software solutions for industrial used manufacturing and testing systems for research and development";
    Vortrag: Advanced Manufacturing Technologies 2004, London; 01.06.2004 - 02.06.2004.

  23. Autor/innen: Andreas Dedinak, AMAT; Wolfgang Studecker, ARC; Alfons Witt, ARC

    A. Dedinak, W. Studecker, A. Witt:
    "Fully automated test-plant for calibration of flow-/heat-meters";
    Vortrag: 16th IFAC World Congress, Prag; 04.07.2005 - 08.07.2005.

  24. Autor/innen: Andreas Dedinak, AMAT; Christian Wögerer, Profactor; Helmut Haslinger, ARC; Peter Hadinger, AMAT [(keine)]

    A. Dedinak, C. Wögerer, H. Haslinger, P. Hadinger:
    "Vertical Integartion on Industrial Examples";
    Vortrag: BASYS04 International Conference, Wien; 27.09.2004 - 29.09.2004.

  25. Autor/innen: Andreas Dedinak, AMAT; Christian Wögerer, Profactor; Helmut Haslinger, ARC; Peter Hadinger, AMAT [(keine)]

    A. Dedinak, C. Wögerer, H. Haslinger, P. Hadinger:
    "Vertical Integration of Mechatronic Systems demonstrated on Industrial Examples - Theory and Implementation Examples";
    Vortrag: Proceedings of the 6th IFIP International Conference on Information Technology for balanced automation systems in Manufacturing and Services, Wien; 27.09.2004 - 29.09.2004.

  26. Autor/innen: M. Eggeling, HMD; J. Schotter; A. Shoshi; V. Höink, HMD; M. Meindl, AMAT [(keine)]; M. Rührig; C. Zilch

    M. Eggeling, J. Schotter, A. Shoshi, V. Höink, M. Meindl, M. Rührig, C. Zilch:
    "Development of a CMOS-integrated tunneling magneto-resistance biosensor";
    Poster: Sensors in medicine 2014, London; 25.03.2014 - 26.03.2014.

  27. Autor/innen: M. Eggeling, HMD; J. Schotter; A. Shoshi; V. Höink, HMD; M. Meindl, AMAT [(keine)]; M. Rührig; C. Zilch

    M. Eggeling, J. Schotter, A. Shoshi, V. Höink, M. Meindl, M. Rührig, C. Zilch:
    "Development of a CMOS-integrated tunneling magneto-resistance biosensor for sepsis diagnostics";
    Poster: 2nd Austrian Biomarker Symposium, Wien; 31.03.2014 - 01.04.2014.

  28. Autor/innen: Fang Yi, Materials Research L; Agrawal Dinesh, Materials Research L; Roy Rustum, Materials Research L; Paul Angerer, AMAT; Skandan Ganesh, Nanopowder Enterpris

    Fang Yi, Agrawal Dinesh, Roy Rustum, P. Angerer, Skandan Ganesh:
    "Microwave Sintering of Nanophase MgO, TiO2 and Cu metal powders";
    Vortrag: Sintering 2003 Conference, State College, PA, USA; 2003.

  29. Autor/innen: Markus Fink, AMAT; Andreas Merstallinger, AAC; Dietmar Uschan, AMAT; J. Eder, ALT; Christian Holzapfel, Schleifring; J. Rehder; Rene Seiler, ESTEC

    M. Fink, A. Merstallinger, U. Uschan, J. Eder, C. Holzapfel, J. Rehder, R. Seiler:
    ""High Temperature Rotary Joint"";
    Vortrag: Final Presentation Days, Noordwijk; 18.03.2008 - 20.03.2008.

  30. Autor/innen: D. Fratila, AMAT; Ana Almansa, ARC; Silvia Bou, AMAT

    D. Fratila, A. Almansa, S. Bou:
    "Assembly of MEMS device using image Processing";
    Vortrag: The 12th International Conference on Robotics and Applications RA 2006, Honolulu, Hawaii, USA; 2006.

  31. Autor/in: Robert Fröschl, AMAT

    R. Fröschl:
    "System zur Online-Messung von ultraschallinduzierter Kavitation in Leichtmetallschmelzen";
    Vortrag: 4. Ranshofener Leichtmetalltage, Ranshofen; 17.10.2006 - 18.10.2006.

  32. Autor/innen: Robert Fröschl, AMAT; Helmut Zemann, AMAT; Michael Kettner, LKR

    R. Fröschl, H. Zemann, M. Kettner:
    "System zur Online-Messung von ultraschallinduzierter Kavitation in Leichtmetallschmelzen";
    Vortrag: 4. Ranshofener Leichtmetalltage, Salzburg; 17.10.2006 - 18.10.2006.

    Zusätzliche Informationen

  33. Autor/innen: Ulrike Galovsky, AMAT; Richard Kretz, LKR

    U. Galovsky, R. Kretz:
    "Manufacturing of large size aluminium foam net shape parts for automotive applications";
    Vortrag: ISATA 99, Wien; 14.06.1999 - 16.06.1999.

  34. Autor/innen: Ge Chang-Chun, ARC; Li Jiang-Tao, Laboratory of Specia; Boro Djuricic, ARC; Roman Sonnleitner, AMAT [(keine)]

    Ge Chang-Chun, L. Jiang-Tao, B. Djuricic, R. Sonnleitner:
    "Dispersed nanocrystals in Y-a-Sialon ceramics";
    Vortrag: 2001 International Symposium on Nano-Materials and Technology, Beijing; P.R. China; 03.07.2001 - 05.07.2001.

  35. Autor/innen: Angelo Genovese, AMAT; Buldrini Nembo, AMAT; Martin Tajmar, SPA; Wolfgang Steiger, AMAT

    A. Genovese, Buldrini Nembo, M. Tajmar, W. Steiger:
    "2000H endurance test of an indium FEEP Cluster";
    Vortrag: International Electric Propulsion Conference, Toulouse; 01.03.2003 - 31.03.2003.

  36. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA

    A. Genovese, M. Tajmar:
    "New Generation of Clusterable In-FEEP Emitters";
    Vortrag: 4th International Spacecraft Propulsion Conference, Sardinia; 01.06.2004 - 30.06.2004.

  37. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA; Wolfgang Steiger, AMAT

    A. Genovese, M. Tajmar, W. Steiger:
    "Indium FEEP Microthruster for Drag Free Control";
    Vortrag: HYPER meeting, Firenze; 22.02.2001 - 24.02.2001.

  38. Autor/innen: Amir Habib, AMAT; Nils Stelzer, PTC; Roland Haubner, Vienna University of

    A. Habib, N. Stelzer, R. Haubner:
    "Fabrication of BaTiO3-PMMA Polymer Nanocomposite Thin/Thick Films and their Dielectric Properties";
    Vortrag: European Materials Research Society, Fall Meeting 2008, Warsaw; 15.09.2008 - 19.09.2008.

  39. Autor/innen: Amir Habib, AMAT; Nils Stelzer, PTC; Roland Haubner, Vienna University of

    A. Habib, N. Stelzer, R. Haubner:
    "Solvothermal synthesis of tetragonal BaTiO3";
    Poster: APCoMS 2008, Pakistan; 2008.

  40. Autor/innen: Amir Habib, AMAT; Nils Stelzer, PTC; Roland Haubner, Vienna University of

    A. Habib, N. Stelzer, R. Haubner:
    "Synthesis of Barium titanate /BT) nano-particles via hydrothermal route for the production of BT embedded polymer nano-composite";
    Vortrag: The First Sharjah International Conference on Nanotechnology and Its applications 2007, United Arab Emirates; 2007.

  41. Autor/innen: Peter Alexander Hahn, AMAT; Thomas Goss, AMAT [(keine)]; Alfred Karlovsky, W; Michael Scheerer, AAC; Anneliese Pönninger, AAC

    P. Hahn, T. Goss, A. Karlovsky, M. Scheerer, A. Pönninger:
    "MONITORING THE CRACK PROPAGATION IN FRACTURE TOUGHNESS SPECIMENS BY MEANS OF ACOUSTIC EMISSION ANALYSIS";
    Vortrag: 2nd European Workshop Strutural Health Monitoring, Munich/Germany; 07.07.2004 - 09.07.2004.

  42. Autor/innen: F. Haruvy Yaara, ARC; Huertas Olivares Inmaculada, AMAT [(keine)]; Volker Liedtke, AAC

    F. Haruvy Yaara, Huertas Olivares Inmaculada, V. Liedtke:
    "Novel Thermal Protection Systems via CTE-matched CMC-OPS tailoring, employing the fast-sol-gel resins";
    Vortrag: 5th European Workshop on Thermal Protection Systems and Hot Structures, Noordwijk; 17.05.2005 - 19.05.2005.

  43. Autor/innen: Donald Heaney, Center for Innovativ; Rudolf Zauner, AMAT; Binet Chantal, ARC; Piemme Jobe , ARC

    D. Heaney, R. Zauner, Binet Chantal, P. Jobe :
    "Process Enhancement for Six Sigma in Powder Injection Molding";
    Vortrag: CISP Industry Member Meeting, Penn State; 24.02.2003 - 25.02.2003.

  44. Autor/innen: Donald Heaney, Center for Innovativ; Rudolf Zauner, AMAT; Binet Chantal, ARC; Piemme Jobe , ARC

    D. Heaney, R. Zauner, Binet Chantal, P. Jobe :
    "Statistical Study on Dimensional Variability of the Powder Injection Molding Process";
    Vortrag: PIM 2003, State College; 16.03.2003 - 19.03.2003.

  45. Autor/innen: Donald Heaney, Center for Innovativ; Rudolf Zauner, AMAT; Binet Chantal, ARC; Piemme Jobe , ARC; Kristina Cowan, ARC

    D. Heaney, R. Zauner, Binet Chantal, P. Jobe , K. Cowan:
    "Dimensional Variability of Green MIM Components";
    Vortrag: PIM 2002, San Diego; 17.03.2002 - 20.03.2002.

  46. Autor/innen: Sabine Höfinger, AMAT; Thomas Hebesberger, voestalpine Stahl Gm; K. Spiradek-Hahn, ADG

    S. Höfinger, T. Hebesberger, K. Spiradek-Hahn:
    "Mikrostrukturuntersuchungen an Dualphasenstählen zur Klärung des Zementitverhaltens";
    Vortrag: 12. Internationale Metallographie Tagung 2006, Montanuniversität Leoben; 27.09.2006 - 29.09.2006.

  47. Autor/innen: Huertas Olivares Inmaculada, AMAT [(keine)]; Volker Liedtke, AAC; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC; Ulrich Trabandt, Astrium GmbH; Handrick E. Karin, MAN Technologie AG

    Huertas Olivares Inmaculada, V. Liedtke, M. Langer, F. Haruvy Yaara, U. Trabandt, Handrick E Karin:
    "Thermo-mechanical Testing of Oxidation Protection System for Re-entry Applications";
    Vortrag: European Congress on Advanced Materials and Processes, Prague, Check Republic; 05.09.2005 - 08.09.2005.

  48. Autor/in: Martin Hulman, AMAT

    M. Hulman:
    "Commercialization of Carbon Nanotubes: On-Market and Near-to-Market Applications";
    Vortrag: 20th International Winterschool on Electronic Properties of Novel Materials, Kirchberg, Tirol; 04.03.2006 - 11.03.2006.

  49. Autor/innen: Martin Hulman, AMAT; Martin Tajmar, SPA

    M. Hulman, M. Tajmar:
    "Indium Ions Emission from Carbon Nanotube Fibres";
    Poster: 20th International Winterschool on Electronic Properties of Novel Materials, Kirchberg; 10.03.2007 - 17.03.2007.

  50. Autor/innen: Piemme Jobe , ARC; Rudolf Zauner, AMAT; Donald Heaney, Center for Innovativ; Binet Chantal, ARC

    P. Jobe , R. Zauner, D. Heaney, Binet Chantal:
    "Powder Injection Molding for Six Sigma";
    Vortrag: CISP Industry Member Meeting, Penn State; 25.02.2002 - 26.02.2002.

  51. Autor/innen: A. G. Jones, Department of; Rudolf Zauner, AMAT; Rigopoulos Stelios, University College,

    A. Jones, R. Zauner, Rigopoulos Stelios:
    "Mixing and scale-up of crystal precipitation systems";
    Vortrag: Industrial Crystallization: BACG Annual Conference, Oxford; 07.09.2003 - 10.09.2003.

  52. Autor/innen: Franz Kager, ADG; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    F. Kager, K. Spiradek-Hahn, M. Brabetz:
    "Alloy Development for critical power plant components";
    Vortrag: COST 536-Conference "Alloy Development for Critical Components of Environmental friendly Power Plant", Bergamo; 09.04.2008.

  53. Autor/innen: Franz Kager, ADG; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    F. Kager, K. Spiradek-Hahn, M. Brabetz:
    "Long-term creep behaviour of the new boron added 9%Cr-Steels at 600 and 650C";
    Vortrag: COST 536-Conference "Alloy Development for Critical Components of Environmental friendly Power Plant", Wien; 29.10.2007 - 31.10.2007.

  54. Autor/innen: Markus Klug, PROFA; S. Tauböck, AMAT; H-K. Schimany, ÖBB Holding AG; Dietmar Schratt, ARC; G. Kaluza, ABC Consulting

    M. Klug, S. Tauböck, H-K. Schimany, D. Schratt, G. Kaluza:
    "Simulation Support for a New Approach to Multimodal Transportation Handling";
    Vortrag: 2005 Winter Simulation Conference, Orlando, Florida, USA; 04.12.2005 - 07.12.2005.

  55. Autor/innen: Georg Korb, PTC; Gottfried Kladler, AMAT [(keine)]

    G. Korb, G. Kladler:
    "From Microstructure to Nanostructure with ODS Alloy PM 2000";
    Vortrag: EUROMAT 2007, Nürnberg; 13.09.2007.

  56. Autor/innen: Georg Korb, PTC; Krystian Maciej, AMAT; Michael Zehetbauer, ARC

    G. Korb, K. Maciej, M. Zehetbauer:
    "SPD-Verfahren und daraus entstehende Werkstoffe";
    Vortrag: ASMET 2006; Forum für Metallurgie und Werkstofftechnik, Leoben; 22.05.2006 - 24.05.2006.

  57. Autor/innen: Georg Korb, PTC; Krystian Maciej, AMAT; Michael Zehetbauer, ARC

    G. Korb, K. Maciej, M. Zehetbauer:
    "SPD-Verfahren und daraus entstehende Werkstoffe z.B. auf Titanbasis";
    Vortrag: ASMET, Leoben; 01.05.2006 - 31.05.2006.

  58. Autor/in: Georg Korg, AMAT

    G. Korg:
    "Metallische Werkstoffe mit Nano-Gefüge durch Severe Plastic Deformation";
    Vortrag: NANO MOBIL; Nanotechnologie und Nanomaterialien im Automobil, Graz; 27.06.2006.

  59. Autor/innen: Andreas Kreutzer, AMAT; Gerhard Traxler, PROFA

    A. Kreutzer, G. Traxler:
    "Auswertemethoden für die thermografische Risskontrolle mit punktförmiger Anregung";
    Vortrag: Thermografie-Forum-Eugendorf, Eugendorf; 07.09.2006 - 10.09.2006.

    Zusätzliche Informationen

  60. Autor/innen: Gernot Kronreif, ARC/MSBS; M. Figl, Institut für Biomedi; J. Kettenbach, Abteilung für Angiop; Martin Fürst, PROFA; Martin Kornfeld, PROFA; W. Ptacek, AMAT; M. Vogele, Medical Intelligence

    G. Kronreif, M. Figl, J. Kettenbach, M. Fürst, M. Kornfeld, W. Ptacek, M. Vogele:
    "IntraROB - A programmable targeting device for interventional radiology";
    Vortrag: 19th International Conference on Computer Assisted Radiology and Surgery. CARS2005, Berlin/Deutschland; 22.06.2005 - 25.06.2005.

  61. Autor/innen: Gernot Kronreif, ARC/MSBS; Barbara Prazak, ARC; Stefan Mina, ARC/MSBS; Martin Kornfeld, PROFA; M. Meindl, AMAT [(keine)]; Martin Fürst, PROFA

    G. Kronreif, B. Prazak, St. Mina, M. Kornfeld, M. Meindl, M. Fürst:
    "PlayROB - Robot-Assisted Playing for Children with Severe Physical Handicaps";
    Vortrag: 9th IEEE International Conference on Rehabilitation Robotics (IEEE ICORR2005), Chicago/USA; 28.06.2005 - 01.07.2005.

  62. Autor/innen: Georg Krumpel, AMAT [(keine)]; Boro Djuricic, ARC; Werner Wruss, ARC; Christian Lengauer, Institut für Mineral; Dietmar Voll, ARC; Nils Stelzer, PTC

    G. Krumpel, B. Djuricic, W. Wruss, Ch. Lengauer, D. Voll, N. Stelzer:
    "Kinetics and mechanisms of the hydrothermal synthesis of nanostructured Titania";
    Vortrag: Euromat 2003, Lausanne, Switzerland; 01.09.2003 - 05.09.2003.

  63. Autor/innen: Maciej Krystian, HBS; Rene Nagel, AMAT

    M. Krystian, R. Nagel:
    ""Two-Component Ceramic Injection Mouding (2C-CIM) for Large-Scale Production for Railway Application"";
    Poster: E-MRS Fall Meeting 2008, Warsaw; 15.09.2008 - 19.09.2008.

  64. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "Einsatz neuer Werkstoffe in der Gesundheitstechnik";
    Vortrag: Gesundheitscluster Oberösterreich, Blue Danube Airport Linz; 28.09.2005.

  65. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "Nano-crystalline magnesium for hydrogene storage produced by Severe Plastic Deformation";
    Vortrag: NANOMATERIALS, Paris; 2004.

  66. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "NANO-TECHNOLOGIE in ARC Seibersdorf research";
    Vortrag: Nanoevent, Wiener Neustadt; 19.10.2005 - 20.10.2005.

  67. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "Nanokristalline Materialien auch für die klassische Werkstoffindustrie";
    Vortrag: ERFA--Sitzung, Leoben; 02.12.2005.

  68. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "Nanokristalline Werkstoffe in ARC Seibersdorf research";
    Vortrag: CSEM, Seibersdorf; 08.11.2005.

  69. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "Präsentation FEEP";
    Vortrag: Workshop, München; 27.09.2000.

  70. Autor/in: Wolfgang Lacom, AMAT

    W. Lacom:
    "Severe Plastic Deformation - Umsetzung und Nutzung";
    Vortrag: SPD workshop, TFZ Wiener Neustadt; 09.12.2004.

  71. Autor/innen: Wolfgang Lacom, AMAT; Nils Stelzer, PTC; Georg Krumpel, AMAT [(keine)]

    W. Lacom, N. Stelzer, G. Krumpel:
    "Funktionelle Nano-Beschichtungen für automotive Anwendungen";
    Vortrag: Fachtagung Mikro&Nano für automotive Zulieferer, Wien; 24.04.2003.

  72. Autor/innen: Wolfgang Lacom, AMAT; Nils Stelzer, PTC; Georg Krumpel, AMAT [(keine)]

    W. Lacom, N. Stelzer, G. Krumpel:
    "Funktionelle Nano-Beschichtungen für automotive Anwendungen";
    Vortrag: Fachtagung Mikro&Nano für automotive Zulieferer, Wien; 24.04.2003.

  73. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, F. Haruvy Yaara:
    "Engineering-Scale fabrication and space-environment testing for Re-Entry C-SiC Ceramic Matrix Composites and Oxygen Protective Systems made by the Fast Sol-Gel";
    Vortrag: The 10th International Symposium on Materials in a Space Environment, Collioure (France); 19.06.2006 - 23.06.2006.

  74. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, F. Haruvy Yaara:
    "Manufacturing and Performance Testing of Sol/Gel based Oxidation Protection Systems for re-usable Space Vehicles";
    Vortrag: IX Conference & Exhibition of the European Ceramic Society- ECERS, Portoroc, Slovenia; 2005.

  75. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, F. Haruvy Yaara:
    "Sol-Gel based Carbon/Silicon carbide";
    Vortrag: IX Conference & Exhibition of the European Ceramic Society- ECERS, Portoroc, Slovenia; 2005.

  76. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, F. Haruvy Yaara:
    "Sol-Gel based Carbon/Silicon-Carbide Composites and Oxidation Protection Systems";
    Vortrag: European Conference on "Spacecraft Structures, Materials & Mechanical Testing", Noordwijk; 2005.

  77. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; Ulrich Trabandt, Astrium GmbH; Handrick E. Karin, MAN Technologie AG; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, U. Trabandt, Handrick E Karin, F. Haruvy Yaara:
    "Thermo-Mechanical Testing of Oxidation Protection System for Ceramic Matrix Composites";
    Vortrag: European Conference on "Spacecraft Structures, Materials & Mechanical Testing", Noordwijk; 2005.

  78. Autor/innen: Olivier Lorret, AMAT; Denisa Francova, TU; Georg Waldner, ERT; Nils Stelzer, PTC

    O. Lorret, D Francova, G. Waldner, N. Stelzer:
    "WO3-doped Titania Nanoparticles for UV and Visible-light Photocatalytic Reactions";
    Vortrag: SPEA5, Sicilia, Italy; 06.10.2008 - 08.10.2008.

  79. Autor/innen: Olivier Lorret, AMAT; K. Kirschbaum; L. Recnik, HMD; Denisa Francova, TU; Lubos Baca, PTC; Georg Waldner, ERT; Nils Stelzer, PTC

    O. Lorret, K. Kirschbaum, L. Recnik, D Francova, L. Baca, G. Waldner, N. Stelzer:
    ""TiO2 thin films: Part 1. Effect of synthesis solvent on photocatalytic activity"";
    Vortrag: 2nd Czech-Austrian workshop: New trends in application of photo- and electro- catalysis, Telc, Czech Republic; 02.12.2008 - 04.12.2008.

  80. Autor/in: Klaus Marhold, AMAT

    K. Marhold:
    "Design and Experimental Investigation of a Micronewton Thrust Balance";
    Vortrag: International Astronautical Congress 2005, Fukuoka, Japan,; 15.10.2005.

  81. Autor/innen: Klaus Marhold, AMAT; Martin Tajmar, SPA

    K. Marhold, M. Tajmar:
    "Direct Thrust Measurement of In-FEEP Clusters";
    Vortrag: International Electric Propulsion Conference, -; 2005.

  82. Autor/innen: Andreas Merstallinger, AAC; Markus Fink, AMAT; Erich Neubauer, PTC; J. Eder, ALT; Christian Holzapfel, Schleifring; Rene Seiler, ESTEC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, M. Fink, E. Neubauer, J. Eder, C. Holzapfel, R. Seiler, L. Gaillard , L. Pambaguian:
    "Highly Loaded Metal Matrix Composites For Low Friaction ApplicationsS";
    Vortrag: ÖTG Symposium 2008, Wr. Neustadt; 20.11.2008.

  83. Autor/innen: Andreas Merstallinger, AAC; Markus Fink, AMAT; Erich Neubauer, PTC; Josef Eder, Schleifring; Christian Holzapfel, Schleifring; Rene Seiler, ESTEC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, M. Fink, E. Neubauer, J. Eder, C. Holzapfel, R. Seiler, L. Gaillard , L. Pambaguian:
    "Self lubricating copper composites for tribological applications at medium";
    Vortrag: ESMATS 2007, Liverpool; 2007.

  84. Autor/innen: Andreas Merstallinger, AAC; Nils Stelzer, PTC; Rudolf Zauner, AMAT; Volker Liedtke, AAC; Leonhard Zeipper, AMAT [(keine)]

    A. Merstallinger, N. Stelzer, R. Zauner, V. Liedtke, L. Zeipper:
    "Innovative Verfahren zur Herstellung (zukünftiger) tribologischer Werkstoffe";
    Vortrag: ÖTG Symposium 2004, ARCS; 04.11.2004.

  85. Autor/innen: Bernhard Mingler, HBS; Hans Peter Karnthaler, Institut für Materia; A. Korznikov, AMAT; Leonhard Zeipper, AMAT [(keine)]; Michael Zehetbauer, ARC

    B. Mingler, H.P. Karnthaler, A. Korznikov, L. Zeipper, M. Zehetbauer:
    "Tem Investigations of the Alloy 1420 after Severe Plastic Deformation";
    Vortrag: 1st Stanislaw Gorczyca Summer School on Advanced Transmission Electron Microscopy, Krakow / Poland; 2003.

  86. Autor/innen: Bernhard Mingler, HBS; Korznikov A. V; Leonhard Zeipper, AMAT [(keine)]; Michael Zehetbauer, ARC; Hans Peter Karnthaler, Institut für Materia

    B. Mingler, Korznikov V, L. Zeipper, M. Zehetbauer, H.P. Karnthaler:
    "Influence of ECAP and Hot Rolling on the Microstructure of an Al-Mg-Li-Zr Alloy";
    Vortrag: 6th Multinational Congress on Microscopy, Pula / Croatia; 01.06.2003 - 05.06.2003.

  87. Autor/innen: Isabel Montealegre, PTC; Erich Neubauer, PTC; Paul Angerer, AMAT

    I. Montealegre, E. Neubauer, P. Angerer:
    "Sintering behaviour and properties of Titanium Metal Matrix Composites";
    Poster: EUROMAT 2007, Nürnberg; 13.09.2007.

  88. Autor/innen: Grazyna Mozdzen, AAC; Andreas Merstallinger, AAC; Manfred Baumgärtner, FEM; Martin Funk, FEM; Anna Biedunkiewicz, TU Stettin; Walter Costin, AMAT

    G. Mozdzen, A. Merstallinger, M. Baumgärtner, M. Funk, A. Biedunkiewicz, W. Costin:
    "Effect of Nano-Particles on the structure and properties of NI(P) coatings electroplated at different conditions and subsequent heat treated";
    Vortrag: Metallographie Tagung Bremen, Bremen; 09/2007.

  89. Autor/innen: Grazyna Mozdzen, AAC; Andreas Merstallinger, AAC; Markus Fink, AMAT; Walter Costin, AMAT; Manfred Baumgärtner, FEM; Anna Biedunkiewicz, TU Stettin

    G. Mozdzen, A. Merstallinger, M. Fink, W. Costin, M. Baumgärtner, A. Biedunkiewicz:
    "Effect of Nano-Particles an the Structure and Propertiees of NiP Coating Electroplated at Different Conditions and Subsequent HEat Treated";
    Vortrag: 41 Internationale Metallographie Tagung, Bremen; 19.09.2007 - 21.09.2007.

  90. Autor/innen: Grazyna Mozdzen, AAC; Friedrich Rüdenauer, AMAT; Walter Costin, AMAT

    G. Mozdzen, F. Rüdenauer, W. Costin:
    "Imaging of Nano-Particles in Fibres and Thin Folis";
    Vortrag: FIB-Usermeeting Arcachon, France; 08.10.2008.

  91. Autor/innen: Grazyna Mozdzen, AAC; Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Mozdzen, Ch. Stocker, K. Spiradek-Hahn, M. Brabetz:
    "Erfassung der Ausscheidungszustände in einem hochwarmfesten 9%-CR Stahl mittels elektrochemischer Phasenisolierung";
    Vortrag: 11. Internationale Metallographie - Tagung, Leoben; 11.09.2002 - 13.09.2002.

  92. Autor/in: Paul Nowakowski, AMAT [(keine)]

    P. Nowakowski:
    "Ein neuer 9% Cr-Stahl mit Co und B-Kriechverhalten und Mikrostruktur";
    Vortrag: Kolloqium über neue Arbeiten auf dem Gebiet der Werkstoffkunde und Prüfverfahren, Technische Universität Wien; 01.03.1999.

    Zusätzliche Informationen

  93. Autor/innen: Paul Nowakowski, AMAT [(keine)]; K. Spiradek-Hahn, ADG

    P. Nowakowski, K. Spiradek-Hahn:
    "Microstructural Features Determing the Creep Strength of the New 9%Cr-Steel with Cobalt and Boron for Super-Critical Power Plants";
    Vortrag: Junior Euromat 2000, European Conference, Lausanne; 28.08.2000 - 01.09.2000.

  94. Autor/innen: Paul Nowakowski, AMAT [(keine)]; K. Spiradek-Hahn, ADG

    P. Nowakowski, K. Spiradek-Hahn:
    "Microstructural Features Determining the Creep Strength of the New 9%Cr-Steel with Cobalt and Boron for Super-Critical Steam Power Plants";
    Vortrag: Junior EUROMAT 2000, Lausanne; 28.08.2000 - 01.09.2000.

  95. Autor/innen: Momtchil Peev, SCT; R. Alléaume, GET-ENST; S Cova, DSS-X; F. Beltram, DSS-X; S. Ghernaouti-Hélie, Uni Lausanne; H. Huebel, University of Vienna; Nicolas Gisin, GAP; P. Grangier, DSS-X; Thomas Länger, SCT; N. Lütkenhaus, Uni Waterloo; Klaus Marhold, AMAT; V. Piazza, DSS-X; Andreas Poppe, SCT; J. Rarity, University Bristol; G Ribordy, ID Quantique; M Riguidel, DSS-X; L. Salvail, BRICS; Harald Weinfurter, DSS-X; Anton Zeilinger, DSS-X [IT-ITQ]

    M. Peev, R. Alléaume, S. Cova, F. Beltram, S. Ghernaouti-Hélie, H. Huebel, N. Gisin, P. Grangier, T. Länger, N. Lütkenhaus, K. Marhold, V. Piazza, A. Poppe, J. Rarity, G. Ribordy, M. Riguidel, L. Salvail, H. Weinfurter, A. Zeilinger:
    "SECOQC - a Résumé";
    Vortrag: Quantum Network Demonstration and Conference, Wien; 08.10.2008 - 10.10.2008.

  96. Autor/innen: Johannes Peham, HMD; Walter Grienauer, AMAT; R. Heer, HMD; M.J Vellekoop; Christa Nöhammer, HMD; Herbert Wiesinger-Mayr, HMD

    J. Peham, W. Grienauer, R. Heer, M. Vellekoop, Ch. Nöhammer, H. Wiesinger-Mayr:
    ""Microdevices for molecular diagnostics"";
    Poster: Lab on a Chip European Congress 2012, Edinburgh; 30.03.2012.

  97. Autor/innen: Sabrina Pottinger, AMAT; Carsten Scharlemann, SPA

    S. Pottinger, C. Scharlemann:
    "Micro Pulsed Plasma Thruster Development";
    Vortrag: 30th International Electric Propulsion Conference, Florence, Italy; 17.09.2007 - 20.09.2007.

  98. Autor/innen: Franka Pravdic, W [(keine)]; Kilian Helmut, AMAT; Martin Brandecker, LKR; Christian Wögerer, Profactor; Gerhard Traxler, PROFA

    F. Pravdic, K. Helmut, M. Brandecker, C. Wögerer, G. Traxler:
    "The Gain Size Evolution of AZ31 Profiles as Function of Different Casting Conditions";
    Vortrag: International Conference on Magnesium - Science Technology and Application, Beijing, Cina; 20.09.2004 - 24.09.2004.

  99. Autor/innen: S. Raz, AMAT; Nils Stelzer, PTC; R. Kalish, AMAT [(keine)]; Josef Maier, AMAT [FM-WM]; I. Riess, AMAT [(keine)]

    S. Raz, N. Stelzer, R. Kalish, J. Maier, I. Riess:
    "Significant hopping conduction and oxygen diffusion in implanted YSZ, at low temperatures 100-250oC";
    Vortrag: 14 th Solid State Ionics Conference, Monterey, United States; 01.06.2003 - 30.06.2003.

  100. Autor/innen: Friedrich Rüdenauer, AMAT; Michael Fehringer, W; Klaus Torkar, ARC

    F. Rüdenauer, M. Fehringer, K. Torkar et al.:
    "Recent Experience with Spacecraft Potential Control";
    Vortrag: 32nd COSPAR, Nagoya, Japan; 01.07.1998 - 31.07.1998.

  101. Autor/innen: Friedrich Rüdenauer, AMAT; W. Riedler, ARC; M. Steller, W

    F. Rüdenauer, W. Riedler, M. Steller et al.:
    "Co-operation between Science and Industry";
    Vortrag: On Industry - Science Co-operation in Space, Wien; 01.09.1998 - 30.09.1998.

  102. Autor/in: Peter Sattler, AMAT

    P. Sattler:
    "Moderne Untersuchungsmethoden in der Werkstofftechnik";
    Vortrag: Intertool`98, Wien; 14.05.1998.

  103. Autor/innen: Peter Sattler, AMAT; Marcus Rennhofer, ECH

    P. Sattler, M. Rennhofer:
    "Gebäudeklimatisierung";
    Hauptvortrag: 17. Photovoltaik-Fachtagung & 10. Speichertagung, Allianz Arena, Wien (eingeladen); 05.11.2019 - 06.11.2019.

  104. Autor/innen: Carsten Scharlemann, SPA; Sabrina Pottinger, AMAT

    C. Scharlemann, S. Pottinger:
    "μPPT-Propulsion Solution for CubeSats";
    Hauptvortrag: The 2007 CubeSat Developer's Workshop, Huntington Beach; 19.04.2007 - 21.04.2007.

  105. Autor/innen: Carsten Scharlemann, SPA; Sabrina Pottinger, AMAT

    C. Scharlemann, S. Pottinger:
    "Pushing the envelope: PPT for CubeSet applications";
    Vortrag: 1st Workshop on instationary MPD Thrusters, Stuttgart; 2007.

  106. Autor/innen: Michael Scheerer, AAC; Peter Alexander Hahn, AMAT; Anneliese Pönninger, AAC; Thomas Goss, AMAT [(keine)]; Alfred Karlovsky, W; Elisabeth Ladstätter, FACC

    M. Scheerer, P. Hahn, A. Pönninger, T. Goss, A. Karlovsky, E. Ladstätter:
    "Monitoring of Failure Development during Fatigue Loading of RTM laminates by Means of Acoustic Emission Analysis";
    Vortrag: 5th International Workshop Strutural Health Monitoring, Stanford; 14.09.2005 - 16.09.2005.

  107. Autor/innen: Michael Scheerer, AAC; Peter Alexander Hahn, AMAT; Anneliese Pönninger, AAC; Thomas Goss, AMAT [(keine)]; A. Reuthlinger

    M. Scheerer, P. Hahn, A. Pönninger, T. Goss, A. Reuthlinger:
    "International Workshop on Structural Heath Monitoring 2007";
    Vortrag: Simultaneous Monitoring of Strain and Temperature in Composite Materials by one single FBG Sensor, Stanford University; 11.09.2007 - 13.09.2007.

  108. Autor/innen: Rene Sedmik, AMAT; Carsten Scharlemann, SPA; Martin Tajmar, SPA; J. Gonzalez del Amo, ARC; A. Hilgers, ARC; D. Estublier, ARC; G. Noci, ARC; M. Carpacci, ARC; C. Koppel, SNECMA

    R. Sedmik, C. Scharlemann, M. Tajmar, J. Gonzalez del Amo, A. Hilgers, D. Estublier, G. Noci, M. Carpacci, C. Koppel:
    "Numerical Simulation of the Interactions between Solar Arrays and the Surrounding Plasma Environment";
    Vortrag: 29th International Electric Propulsion Conference, Princeton; 01.10.2005 - 31.10.2005.

  109. Autor/innen: A. Shoshi; J. Schotter; A. Keller, HMD; H. Brückl; M. Meindl, AMAT [(keine)]; M. Rührig; C. Zilch

    A. Shoshi, J. Schotter, A. Keller, H. Brückl, M. Meindl, M. Rührig, C. Zilch:
    "Magnetic lab-on-a-chip devices for biomolecular detection and real-time cell analysis";
    Vortrag: BioNanoMed 2012, Krems; 01.03.2012 - 02.03.2012.

  110. Autor/innen: A. Shoshi; J. Schotter; A. Keller, HMD; M. Meindl, AMAT [(keine)]; M. Rührig; C. Zilch

    A. Shoshi, J. Schotter, A. Keller, M. Meindl, M. Rührig, C. Zilch:
    "Magnetic biochip platforms for biomolecular diagnosis and real-time cell analysis";
    Vortrag: 9th International Conference on Nanosciences & Nanotechnologies (NN12), Thessaloniki, Greece (eingeladen); 03.07.2012 - 06.07.2012.

  111. Autor/innen: A. Sieber, AMAT [(keine)]; P. Valdastri, ARC; K. Houston, ARC; A. Menciassi, ARC; P. Dario, ARC

    A. Sieber, P. Valdastri, K. Houston, A. Menciassi, P. Dario:
    "Flip chip microassembly of a mems based silicon sensor on flexible substrates";
    Vortrag: Eurosensors 2006, Göteborg; 17.09.2006 - 20.09.2006.

  112. Autor/innen: A. Sieber, AMAT [(keine)]; P. Valdastri, ARC; K. Houston, ARC; O. Tonet, ARC; C. Eder, ARC; A. Menciassi, ARC; P. Dario, ARC

    A. Sieber, P. Valdastri, K. Houston, O. Tonet, C. Eder, A. Menciassi, P. Dario:
    "Triaxial force sensing mems device for tactile haptic force feedback applications in the nanoscale";
    Vortrag: Eurosensors 2006, Göteborg; 17.09.2006 - 20.09.2006.

  113. Autor/innen: Roman Sonnleitner, AMAT [(keine)]; K. Spiradek-Hahn, ADG; J. Strutzenberger, VOEST ALPINE STAHL L

    R. Sonnleitner, K. Spiradek-Hahn, J. Strutzenberger:
    "TEM-investigations of interface layer reactions on sheet steel during the galvannealing process";
    Vortrag: A Conference on Modern Microscopical Methods, Innsbruck; 09.09.2001 - 14.09.2001.

  114. Autor/innen: K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    K. Spiradek-Hahn, M. Brabetz:
    "Anwendung der Transmissionselektronenmikroskopie (TEM/HRTEM) für Aluminiumlegierungen";
    Vortrag: AMAG rolling GmbH,, Ranshofen; 01.04.2004.

  115. Autor/innen: K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT; Franz Kager, ADG

    K. Spiradek-Hahn, M. Brabetz, F. Kager:
    ""Alloy Development for critical power plant components"";
    Vortrag: COST 536-Conference "Alloy Development for Critical Components of Environmental friendly Power Plant", Lanzarotte; 22.10.2008.

  116. Autor/innen: K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT; Grazyna Mozdzen, AAC; Jaroslav Wosik, ARC

    K. Spiradek-Hahn, M. Brabetz, G. Mozdzen, J. Wosik:
    "TEM/HRTEM Analysis of Precipitates in Ti-IF Steel Grades with defferent S content";
    Vortrag: Int.workshop, Linz; 04.03.2003.

  117. Autor/innen: K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT; Jaroslav Wosik, ARC

    K. Spiradek-Hahn, M. Brabetz, J. Wosik:
    "Hochauflösende Elektronenmikroskopie und Analytik im Nanobericht - neue Entwicklungen für die innnovativ Stahlindustrie";
    Vortrag: Vortrag bei voestalpine Stahl, Linz; 24.09.2003.

  118. Autor/innen: K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT; Jaroslav Wosik, ARC

    K. Spiradek-Hahn, M. Brabetz, J. Wosik:
    "TEM/HRTEM- Bestimmung der nanoskaligen intermetallischen Phasen in einem austenitischen Warmarbeitsstahl";
    Vortrag: BÖHLER, Kapfenberg, BÖHLER; 27.05.2004.

  119. Autor/innen: K. Spiradek-Hahn, ADG; Franz Kager, ADG; Manfred Brabetz, AMAT

    K. Spiradek-Hahn, F. Kager, M. Brabetz:
    "Prediction and experimental assessment of materials behaviour for critical power plants components using nano- and meso-scale techniques";
    Vortrag: COST 536-Conference "Alloy Development for Critical Components of Environmental friendly Power Plant", Wien; 29.10.2007 - 31.10.2007.

  120. Autor/innen: K. Spiradek-Hahn, ADG; Christian Stocker, AMAT; Manfred Brabetz, AMAT; Günter Zeiler, Böhler

    K. Spiradek-Hahn, Ch. Stocker, M. Brabetz, G. Zeiler:
    "Improvement of Creep Behaviour of 9%Cr-Steels by Boron Addition";
    Vortrag: Internatioanl Japanese - Austrian Seminar, Graz; 07.10.2002.

  121. Autor/innen: K. Spiradek-Hahn, ADG; Jaroslav Wosik, ARC; Manfred Brabetz, AMAT

    K. Spiradek-Hahn, J. Wosik, M. Brabetz:
    "Möglichkeiten zur Gefügebestimmung von komplexen Stahlstrukturen mittels modernen TEM und HRTEM-Techniken: Beispiele aus der Praxis";
    Vortrag: BÖHLER, Kapfenberg; 27.05.2004.

  122. Autor/innen: K. Spiradek-Hahn, ADG; Jaroslav Wosik, ARC; Manfred Brabetz, AMAT

    K. Spiradek-Hahn, J. Wosik, M. Brabetz:
    "TEM, HRTEM, Elektronen-Nanoalalytik für die moderne Stahlforschung";
    Vortrag: Vortrag bei Böhler Edelstahl, Kapfenberg; 20.11.2003.

  123. Autor/in: Christoph Steiger, AMAT

    Ch. Steiger:
    "HighSpeed-Bildverarbeitung mit plasmo profile observer";
    Vortrag: Workshop Sensorik, FH Wiener Neustadt; 21.11.2002.

  124. Autor/innen: Christoph Steiger, AMAT; Robert Fröschl, AMAT

    Ch. Steiger, R. Fröschl:
    "3D Vision für Robotergestützte Automation";
    Vortrag: Industrial Innovations - Zukunftsweisende Technologien im Automotive Sektor, ARC Seibersdorf research GmbH; 24.11.2005.

    Zusätzliche Informationen

  125. Autor/innen: Christoph Steiger, AMAT; Robert Fröschl, AMAT

    Ch. Steiger, R. Fröschl:
    "Automatisierte Schweißnahtkontrolle";
    Vortrag: Industrial Innovations - Zukunftsweisende Technologien im Automotive Sektor, ARC Seibersdorf research GmbH; 24.11.2005.

    Zusätzliche Informationen

  126. Autor/innen: Christoph Steiger, AMAT; Thomas Grünberger, W; Manfred Bammer, HBS; Arnold Braunsteiner, ARC; Markus Bohrer, ARC

    Ch. Steiger, T. Grünberger, M. Bammer, A. Braunsteiner, M. Bohrer:
    "Application of wavelets for online laser process observer";
    Vortrag: AeroSense, Orlando; 16.04.2001 - 20.04.2001.

    Zusätzliche Informationen

  127. Autor/innen: Christoph Steiger, AMAT; W. Ptacek, AMAT; Gernot Kronreif, ARC/MSBS; Christian Wögerer, Profactor

    Ch. Steiger, W. Ptacek, G. Kronreif, C. Wögerer:
    "Online Control sensors for welding processes based on optical recognition";
    Vortrag: 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Beijing; 29.08.2006 - 01.09.2006.

  128. Autor/in: Wolfgang Steiger, AMAT

    W. Steiger:
    "Effects seen with Indium LMIS";
    Vortrag: COSIMA Team Meeting, Glurns; 07.05.2007 - 11.05.2007.

  129. Autor/in: Wolfgang Steiger, AMAT

    W. Steiger:
    "Indium Ions for Automatic Potential Control: From Experiment to Spacecraft Application";
    Vortrag: 1st General Assembly, Nice; 2004.

  130. Autor/in: Wolfgang Steiger, AMAT

    W. Steiger:
    "Ionenquellen aus Seibersdorf";
    Vortrag: COSIMA Team Meeting, Glurns; 11.04.2005 - 14.04.2005.

  131. Autor/innen: Wolfgang Steiger, AMAT; Angelo Genovese, AMAT; Martin Tajmar, SPA

    W. Steiger, A. Genovese, M. Tajmar:
    "Austrian Research Centers Seibersdorf Electric Propulsion Research"; Greenbelt, USA; 17.11.2000.

  132. Autor/innen: Wolfgang Steiger, AMAT; Martin Tajmar, SPA; Angelo Genovese, AMAT

    W. Steiger, M. Tajmar, A. Genovese:
    "Indium FEEP Microthruster";
    Vortrag: 1st DIVA Thinkshop, Heidelberg; 03.04.2001 - 05.04.2001.

  133. Autor/in: Christian Stocker, AMAT

    Ch. Stocker:
    "Beeinflussung der Kriecheigenschaften eines neuen 9% Cr-Stahles durch die Ausscheidung einer intermetallischen Phase (Laves Phase)";
    Vortrag: Beeinflussung der Kriecheigenschaften eines neuen 9% Cr-Stahles durch die Ausscheidung einer intermetallischen Phase (Laves Phase), TU Wien; 16.04.2002.

  134. Autor/innen: Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Paul Nowakowski, AMAT [(keine)]

    Ch. Stocker, K. Spiradek-Hahn, P. Nowakowski:
    "Microstructural features determining the creep strength of the new 9%Cr-steel with cobalt and boron for super-critical steam power plants";
    Vortrag: A Conference on Modern Microscopical Methods, Innsbruck; 09.09.2001 - 14.09.2001.

  135. Autor/innen: Martin Tajmar, SPA; Angelo Genovese, AMAT; Wolfgang Steiger, AMAT

    M. Tajmar, A. Genovese, W. Steiger:
    "Development of Indium FEEP Microthruster";
    Vortrag: NASA/JPL/MSFC/UAH 12th Annual Advanced Space Propulsion Workshop, USA; 01.04.2001 - 30.04.2001.

  136. Autor/innen: Martin Tajmar, SPA; Klaus Marhold, AMAT; Sebastian Kropatschek, AMAT [(keine)]

    M. Tajmar, K. Marhold, S. Kropatschek:
    "Three-Dimensional In-FEEP Plasmadiagnostics";
    Vortrag: International Electric Propulsion Conference, Toulouse; 01.03.2003 - 31.03.2003.

  137. Autor/innen: Martin Tajmar, SPA; Klaus Marhold, AMAT; Sebastian Kropatschek, AMAT [(keine)]; Klaus Hense, AMAT [(keine)]

    M. Tajmar, K. Marhold, S. Kropatschek, K. Hense:
    "Advanced 3D Plasma Diagnostic for the Indium FEEP Microthruster";
    Vortrag: 39th AIAA/ASME/SAE/ASEE Jount Propusion Conference and Exhibit, Huntsville, Alabama, USA; 30.06.2003 - 23.07.2003.

  138. Autor/innen: Martin Tajmar, SPA; Florin Plesescu, AMAT [(keine)]; Bernhard Seifert, SPA; Reinhard Schnitzer, AMAT; Vasiljevich Ivanhoe, SPA

    M. Tajmar, F. Plesescu, B. Seifert, R. Schnitzer, Vasiljevich Ivanhoe:
    "Search for Frame-Dragging-Like Signals Close to Spinning Superconductors";
    Vortrag: 18th International Conference on General Relativity and Graviation, Sidney; 07/2007.

  139. Autor/innen: Martin Tajmar, SPA; Wolfgang Steiger, AMAT; Angelo Genovese, AMAT

    M. Tajmar, W. Steiger, A. Genovese:
    "Development of Indium FEEP Microthrusters"; Stuttgart, D; 13.12.2000.

  140. Autor/innen: Petra Tatzer, PROFA; Thomas Panner, AMAT; Wolf Markus, W; Gerhard Traxler, PROFA

    P. Tatzer, T. Panner, W. Markus, G. Traxler:
    "Inline sorting with hyperspectral imaging in an industrial environment";
    Vortrag: Real-Time Imaging IX, San Jose/USA; 18.01.2005 - 20.01.2005.

  141. Autor/innen: Petra Tatzer, PROFA; Thomas Panner, AMAT; Wolf Markus, W; Gerhard Traxler, PROFA

    P. Tatzer, T. Panner, W. Markus, G. Traxler:
    "Inline sorting with hyperspectral imaging in an industrial environment";
    Vortrag: SPIE 2005, San Jose, USA; 16.01.2005 - 20.01.2005.

  142. Autor/innen: Petra Tatzer, PROFA; Thomas Panner, AMAT; Christian Wögerer, Profactor; Gerald Nittmann, ARC

    P. Tatzer, T. Panner, C. Wögerer, G. Nittmann:
    "Tampon inspection unit - Applikation of automation and image processing in critical industrial production process";
    Vortrag: 3rd IFAC Symposium on Mechatronic Systems, Sydney (Australia); 06.09.2004 - 08.09.2004.

    Zusätzliche Informationen

  143. Autor/innen: S. Tauböck, AMAT; Markus Klug, PROFA; Dietmar Schratt, ARC; G. Kaluza, ABC Consulting; Felix Breitenecker, ARC

    S. Tauböck, M. Klug, D. Schratt, G. Kaluza, F. Breitenecker:
    "Simulation of an Innovative Handling Terminal - Implementation of Continuous Tasks in a Discrete Event Simulation System";
    Vortrag: European Modelling Symposium, London; 11.09.2006 - 12.09.2006.

  144. Autor/innen: Klaus Torkar, ARC; Andrew Fazakerley, MSSL University Coll; Philippe Escoubet, ESA/ESTEC, The Nethe; Michael Fehringer, ESA/ESTEC, The Nethe; Gerhard Fremuth, Institut für Weltrau; B.T. Narheim, ARC; Wolfgang Steiger, AMAT; Knut Svenes, ARC

    K. Torkar, A. Fazakerley, P. Escoubet, M. Fehringer, G. Fremuth, B.T. Narheim, W. Steiger, K. Svenes:
    "The instrument ASPOC onboard Double Star TC-1 and first results of spacecraft potential control";
    Vortrag: (Invited), EGU General Assembly, Vienna; 01.04.2005 - 30.04.2005.

  145. Autor/innen: Klaus Torkar, ARC; Andrew Fazakerley, MSSL University Coll; Wolfgang Steiger, AMAT

    K. Torkar, A. Fazakerley, W. Steiger:
    "Active spacecraft potential control: results from the Double Star project";
    Vortrag: 9th Spacecraft Charging Technology Conference, Tsukuba; 01.04.2005 - 30.04.2005.

  146. Autor/innen: Klaus Torkar, ARC; Gerhard Fremuth, Institut für Weltrau; Wolfgang Steiger, AMAT; B.T. Narheim, ARC; Knut Svenes, ARC; Philippe Escoubet, ESA/ESTEC, The Nethe; Michael Fehringer, ESA/ESTEC, The Nethe; Andrew Fazakerley, MSSL University Coll; Haofeng Zhao , ARC

    K. Torkar, G. Fremuth, W. Steiger, B.T. Narheim, K. Svenes, P. Escoubet, M. Fehringer, A. Fazakerley, H. Zhao :
    "Active Ion Emission Onboard the Double Star TC-1 Spacecraft - Results from Initial Science Operations";
    Vortrag: -, Institut für Weltraumforschung, Akademie der Wissenschaften; 01.10.2004 - 31.10.2004.

  147. Autor/innen: Gerhard Traxler, PROFA; Thomas Panner, AMAT; Petra Tatzer, PROFA; Wolf Markus, W; Huber Reinhard, Binder + Co AG

    G. Traxler, T. Panner, P. Tatzer, W. Markus, H. Reinhard:
    "Inline Sorting with hyperspectral imaging in an industrial environment";
    Vortrag: Electronic Imaging 2005, San Jose (USA); 17.01.2005 - 20.01.2005.

    Zusätzliche Informationen

  148. Autor/innen: Gerhard Traxler, PROFA; Christoph Steiger, AMAT

    G. Traxler, Ch. Steiger:
    "Quality Control on Greenbodies";
    Vortrag: PM 2004, Wien; 20.10.2004.

    Zusätzliche Informationen

  149. Autor/innen: Gerhard Traxler, PROFA; Christoph Steiger, AMAT; Björn Jonsson, W

    G. Traxler, Ch. Steiger, B. Jonsson:
    "Aufbau eines Prüfstandes für Infrarot-Thermographie";
    Vortrag: Projektarbeit FH-Wiener Neustadt, Seibersdorf; 01.12.2002 - 31.12.2002.

  150. Autor/innen: Gerhard Traxler, PROFA; Christoph Steiger, AMAT; Björn Jonsson, W

    G. Traxler, Ch. Steiger, B. Jonsson:
    "Industrielle Anwendungen der Thermographie";
    Vortrag: Thermographie-Workshop, Congress Zentrum Leoben; 30.10.2003.

  151. Autor/innen: Gerhard Traxler, PROFA; Christoph Steiger, AMAT; Michael Scheerer, AAC

    G. Traxler, Ch. Steiger, M. Scheerer:
    "Square pulse thermography system design considerations for detection of voids inside of the material with different properties and finite differences";
    Vortrag: Electronic Imaging 2005, San Jose (USA); 17.01.2005 - 20.01.2005.

    Zusätzliche Informationen

  152. Autor/innen: P. Valdastri, ARC; K. Houston, ARC; A. Menciassi, ARC; P. Dario, ARC; A. Sieber, AMAT [(keine)]; M. Yanagihara, Waseda University, T; M. Fujie, Waseda University, T

    P. Valdastri, K. Houston, A. Menciassi, P. Dario, A. Sieber, M. Yanagihara, M. Fujie:
    "Miniaturised cutting tool with triaxial force sensing capabilities for minimally invasive surgery";
    Vortrag: ESDA 2006, Turin; 2006.

  153. Autor/innen: Georg Waldner, ERT; Lubos Baca, PTC; Olivier Lorret, AMAT; Nils Stelzer, PTC

    G. Waldner, L. Baca, O. Lorret, N. Stelzer:
    "Phonas-Photocatalytic Nano Layers, Transparent self-cleaning and -sterilizing Coatings based on photocatalytic Nanoparticles (PCNPs)";
    Vortrag: SPEA5, Sicilia, Italy; 06.10.2008 - 08.10.2008.

  154. Autor/innen: Georg Waldner, ERT; Olivier Lorret, AMAT; Hannes Steiner, PTC; Lubos Baca, PTC; Nils Stelzer, PTC

    G. Waldner, O. Lorret, H. Steiner, L. Baca, N. Stelzer:
    ""TiO2 thin films: Part 2. Comparison of test methods:resazurin/glycerol (solid/air photocatalysis) vs. methylene blue (solid/liquid phase photocatalysis)"";
    Vortrag: 2nd Czech-Austrian workshop: New trends in application of photo- and electro- catalysis, Telc, Czech Republic; 02.12.2008 - 04.12.2008.

  155. Autor/in: Christian Wartha, AMAT

    Ch. Wartha:
    "Prozessoptimierung Simulation - ein neues Planungswerkzeug in Produktion und Logistik";
    Vortrag: WIN Gmbh, Guntramsdorf; 27.02.2004.

  156. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, Vienna, Austria; 09.03.2005 - 11.03.2005.

  157. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, Vienna, Austria; 09.03.2005 - 11.03.2005.

  158. Autor/innen: Hui Yu, AMAT; Erich Neubauer, PTC; Paul Angerer, AMAT; Rudolf Zauner, AMAT

    H. Yu, E. Neubauer, P. Angerer, R. Zauner:
    "Investigation of Microstructure and composition of coated diamonds used in diamond based composites";
    Vortrag: 2nd International Industrial Diamond Conference, Rom; 19.04.2007 - 20.04.2007.

  159. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Dimensional Variation of PIM Components";
    Vortrag: CISP Industry Member Meeting, Penn State; 15.10.2001.

  160. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Entbindern und Sintern";
    Vortrag: Plastiale 2004, TGM Wien; 18.05.2004 - 19.05.2004.

  161. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Heat Sinks: Innovative Materials and Processes";
    Vortrag: rd International Symposium on Nanotechnology and LEDs, Köflach; 24.09.2005 - 25.09.2005.

  162. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Innovative Werkstoffe und Prozess im Nanozeitalter";
    Vortrag: Fachdialog Innovation, Wiener Neustadt; 04.12.2003.

  163. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Micro Powder Injection Molding (Micro PIM)";
    Vortrag: MNE 2005, 31st International Conference on Micro- and Nano Engineering, Vienna; 2005.

  164. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Pulvermetallurgische Präzisionsteile";
    Vortrag: ASMET-Seminar "Pulvermetallurgische Präzisionsteile", Montanuniversität Leoben; 31.03.2004.

  165. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Scale-up of nanoparticle precipitation processes";
    Vortrag: MPIF, Providence; 17.09.2003 - 18.09.2003.

  166. Autor/in: Rudolf Zauner, AMAT

    R. Zauner:
    "Technologieübersicht PIM";
    Vortrag: Workshop Powder Injection Moulding, Seibersdorf; 28.04.2004.

  167. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC

    R. Zauner, Binet Chantal:
    "Numerical Simulation of Binder Burnout and Stress Formation";
    Vortrag: CISP Industry Member Meeting, Penn State; 09.10.2002 - 10.10.2002.

  168. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC

    R. Zauner, Binet Chantal:
    "Simulation of Binder Burnout";
    Vortrag: CISP Industry Member Meeting, Penn State; 24.02.2003 - 25.02.2003.

  169. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC; Donald Heaney, Center for Innovativ

    R. Zauner, Binet Chantal, D. Heaney:
    "Evaluation of Critical Pressure During Thermal Debinding";
    Vortrag: PM2Tec 2004 World Congress on Powder Metallurgy and Particulate Materials, Vienna; 17.10.2004 - 21.10.2004.

  170. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC; Donald Heaney, Center for Innovativ

    R. Zauner, Binet Chantal, D. Heaney:
    "Numerical Simulation of Debinding";
    Vortrag: Powder Injection Molding Conference PIM 2003, State College; 17.03.2003 - 19.03.2003.

  171. Autor/innen: Rudolf Zauner, AMAT; Binet Chantal, ARC; Donald Heaney, Center for Innovativ

    R. Zauner, Binet Chantal, D. Heaney:
    "Simulation of Binder Burnout";
    Vortrag: PIM 2003, State College; 16.03.2003 - 19.03.2003.

  172. Autor/innen: Rudolf Zauner, AMAT; Harald Bleier, ecoplus NÖ Wirtschaf

    R. Zauner, H. Bleier:
    "Vorstellung der Projekte des PIM Design Award";
    Vortrag: Neue Impulse aus der Werkstofftechnik, Wien; 14.06.2006.

  173. Autor/innen: Rudolf Zauner, AMAT; Donald Heaney, Center for Innovativ

    R. Zauner, D. Heaney:
    "Variability of Feedstock and its Effect on Component Dimensional Variability";
    Vortrag: PM2Tec Congress on Powder Metallurgy and Particulate Materials 2003, Las Vegas; 08.06.2003 - 12.06.2003.

  174. Autor/innen: Rudolf Zauner, AMAT; Donald Heaney, Center for Innovativ; Piemme Jobe , ARC; Binet Chantal, ARC; Randall German , ARC

    R. Zauner, D. Heaney, P. Jobe , Binet Chantal, R. German :
    "The Effect of Powder Loading on Dimensional Variability in PIM";
    Vortrag: PM2Tec 2002 World Congress on Powder Metallurgy and Particulate Materials, Orlando; 17.06.2002.

  175. Autor/innen: Rudolf Zauner, AMAT; Donald Heaney, Center for Innovativ; Piemme Jobe , ARC; Binet Chantal, ARC; Randall German , ARC

    R. Zauner, D. Heaney, P. Jobe , Binet Chantal, R. German :
    "The Effect of Powder Type and Powder Size on Dimensional Variability in PIM";
    Vortrag: PM2Tec 2002 World Congress on Powder Metallurgy and Particulate Materials, Orlando; 17.06.2002.

  176. Autor/innen: Rudolf Zauner, AMAT; Georg Korb, PTC

    R. Zauner, G. Korb:
    "Microstructured Components by Micro PIM";
    Vortrag: 1st International Conference on Micro/Nanotechnology, Vienna; 09.03.2005 - 11.03.2005.

  177. Autor/innen: Rudolf Zauner, AMAT; Georg Korb, PTC

    R. Zauner, G. Korb:
    "Pulverspritzgießen";
    Vortrag: ASMET-Forum, Leoben; 24.05.2005 - 25.05.2005.

  178. Autor/innen: Rudolf Zauner, AMAT; Jin Park Seong, ARC; Chung Sukhwan, Center for Innovativ; Atre Sundar, ARC; Randall German , ARC

    R. Zauner, J. Park Seong, Chung Sukhwan, Atre Sundar, R. German:
    "Sensitivity Analysis & Optimization for PIM of 316L Stainless Steel,";
    Vortrag: Powder Injection Molding Conference PIM 2003, State College; 17.03.2003 - 19.03.2003.

  179. Autor/innen: Rudolf Zauner, AMAT; Jin Park Seong, ARC; Taek Chung Sung, ARC; Atre Sundar, ARC; Randall German , ARC

    R. Zauner, J. Park Seong, T. Chung Sung, Atre Sundar, R. German:
    "Sensitivity Analysis & Optimization for PIM of 316L Stainless Steel";
    Vortrag: PIM 2003, State College; 16.03.2003 - 19.03.2003.

  180. Autor/innen: Rudolf Zauner, AMAT; Piemme Jobe, AMAT; Jin Park Seong, ARC; Gerhard Bäck

    R. Zauner, Piemme Jobe, J. Park Seong, G. Bäck:
    "Case Study for Mold Filling of PIM Components: Simulation and Experimental Validation";
    Vortrag: Powder Injection Molding Conference PIM 2005, San Diego; 21.03.2005 - 23.03.2005.

  181. Autor/innen: Michael Zehetbauer, ARC; Krystian Maciej, AMAT; Wolfgang Lacom, AMAT

    M. Zehetbauer, K. Maciej, W. Lacom:
    "Bulk Nanostructured Metals by Severe Plastic Deformation (SPD)";
    Vortrag: NSTI Nanotechnology Conference and Trade Show Nanotech 2005, California, U.S.A; 08.05.2005 - 12.05.2005.

  182. Autor/innen: Zhilinska Natalja, ARC; Zalite Ilmars, ARC; A. Krumina, AMAT [(keine)]; Grazyna Mozdzen, AAC

    Zhilinska Natalja, Zalite Ilmars, A. Krumina, G. Mozdzen:
    "Sintering process of commercial and nanopowders of Si3N4-6Y2O3-3Al2O3";
    Vortrag: The 12th International Baltic Conference "Engineering Materials & Tribology" BALTMATTRIB-2003, Tallinn, Estonia; 02.10.2003 - 03.10.2003.


Dissertationen (eigene und begutachtete)


  1. Autor/in: Amir Habib, AMAT
    Andere beteiligte Personen: Nils Stelzer, PTC; Roland Haubner, Vienna University of; Guido Kickelbick

    A. Habib:
    "Hydrothermal synthesis of nanocrystalline barium titanate and the production of thin ceramic-polymer dielectric films";
    Betreuer/in(nen), Begutachter/in(nen): N. Stelzer, R. Haubner, G. Kickelbick; Technische Universität Wien, Fakultät für Technische Chemie, Institut für Chemische Technologien und Analytik, 2008; Rigorosum: 07/2008.

    Zusätzliche Informationen

  2. Autor/in: Christian Stocker, AMAT

    Ch. Stocker:
    "Auswirkung der Ausscheidungskinetik auf das Kriechverhalten Mo- und B-legierter 9% Cr-Stähle"; Wien, 2003.

  3. Autor/in: Leonhard Zeipper, AMAT [(keine)]

    L. Zeipper:
    "Defect based Micromechanics of nanoSPD Titanium Deformation - Experiments, Modelling & Simulation"; Univ. Vienna and ARC Seibersdorf research GmbH, 2004.


Diplom- und Master-Arbeiten (eigene und betreute)


  1. Autor/in: Christian Aschauer, AMAT

    Ch. Aschauer:
    "Softwareentwicklung für die Feldbussysteme - INTERBUS, PROFIBUS, CAN und ETHERNET - am PC unter MS-Windows mit proprietären Softwarebibliotheken und dem Industriestandard OLE for Process Control (OPC) unter Verwendung der Programmiersprachen Visual Basic"; Wien und Seibersdorf, 2005.

    Zusätzliche Informationen

  2. Autor/in: Homa Johannes, AMAT

    H. Johannes:
    "Rapid Tooling für die Verarbeitung pulverbasierter Werkstoffe"; ARCS / TU Wien, 2005.

  3. Autor/innen: Wolf Markus, W; Petra Tatzer, PROFA; Thomas Panner, AMAT

    W. Markus, P. Tatzer, T. Panner:
    "Entwicklung eines Prototypen für ein örtlich und farblich hochauflösendes Farbmesssystem zur Qualitätskontrolle farbig bedruckter Oberflächen"; Seibersdorf, 2002.

    Zusätzliche Informationen

  4. Autor/in: Katalin Nikolics, AMAT

    K. Nikolics:
    "Optimierung von ECAP mittels künstlicher neuronaler Netze"; Univ. Vienna and ARC Seibersdorf research GmbH, 2004.

  5. Autor/in: P. Schmidt, AMAT

    P. Schmidt:
    "Produktion von Nanopartikeln im Pilot- und Industriemaßstab"; Seibersdorf, 2005.