AIT Home
Diese Publikationsliste wurde automatisch aus den Publikationsdaten von ARC (Publikationen aus 1976 - 2008) erstellt. Wenn Sie komplexere Suchabfragen vornehmen wollen, rufen Sie bitte die Seite "Publikationen des Centers" direkt auf, oder verwenden Sie die globale Suchfunktion der Publikationsdatenbank des AIT Austrian Institute of Technology!


Publikationsdatenbank Home  

Publikationsliste für Angehörige von
AMAT - Aerospace and Advanced Composites
als Autorinnen / Autoren bzw. wesentlich beteiligte Personen

159 Datensätze (1982 - 2021)


Zeitschriftenbeiträge


  1. Autor/innen: S. Biamino; Volker Liedtke, AAC; C. Badini; Gerhard Euchberger, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; M. Pavese; P. Fino

    S. Biamino, V. Liedtke, C. Badini, G. Euchberger, Huertas Olivares Inmaculada, M. Pavese, P. Fino:
    "Multilayer SiC for thermal protection system of space vehicles: Manufacturing and testing under simulated re-entry conditions";
    Journal of the European Ceramic Society, vol. 28/14 (2008), S. 2791 - 2800.

  2. Autor/innen: Jean-Marie Dubois , ARC; de Weerd Marie-Cécile, CNRS; Josef Brenner, ARC; Sales Muriel, AAC; Grazyna Mozdzen, AAC; Andreas Merstallinger, AAC; E. Belin-Ferre

    Dubois , de Weerd Marie-Cécile, J. Brenner, Sales Muriel, G. Mozdzen, A. Merstallinger, E. Belin-Ferre:
    "Surface energy of complex - and simpl - metallic compounds as derived from friction test in vacuum";
    Philosophical Magazine, Vol 86 (2005), S. 797 - 805.

  3. Autor/innen: Jean-Marie Dubois , ARC; Pierre Brunet, ARC; Walter Constin, AMAT; Andreas Merstallinger, AAC

    Jean-Marie Dubois , P. Brunet, W. Constin, A. Merstallinger:
    "Friction and fretting on quasicrystals under vacuum";
    Journal of Non-Crystalline solids, Vol. 334-335 (2004), S. 475 - 480.

  4. Autor/innen: Markus Fink, AMAT; Thomas Fabing, AMAT; Michael Scheerer, AAC; Ernst Semerad, AAC; B.D. Dunn, ALT

    M. Fink, T. Fabing, M. Scheerer, E. Semerad, B.D. Dunn:
    ""Measurement of mechanical properties of electronic materials at temperatures down to 4.2 K"";
    Cryogenics, vol. 48 (2008), S. 497 - 510.

  5. Autor/innen: Yair Haruvy, ARC; Volker Liedtke, AAC

    Y. Haruvy, V. Liedtke:
    "Sol-gel derived C-SiC composites for re-entry structures";
    Materialwissenschaft und Werkstofftechnik, Volume 34 (2003), Issue 4; S. 322 - 326.

  6. Autor/innen: Jelena Horky, HBS; Krzysztof Bryla; Maciej Krystian, HBS; Grazyna Mozdzen, AAC; Bernhard Mingler, HBS; Laszlo Sajti, HBS

    J. Horky, K. Bryla, M. Krystian, G. Mozdzen, B. Mingler, L Sajti:
    "Improving mechanical properties of lean Mg-Zn-Ca alloy for absorbable implants via Double Equal Channel Angular Pressing (D-ECAP)";
    Materials Science and Engineering A, 826 (2021), 142002; S. 1 - 12.

  7. Autor/innen: M. Kasiarová, Slovak Acad. of Sc.,; E. Rudnayová, Slovak Acad. of Sc.,; J. Kovalík, Slovak Acad. of Sc.,; Jan Dusza, ARC; M. Hnatko, Slovak Acad. of Sc.,; P. Sajgalik, ARC; Andreas Merstallinger, AAC

    M. Kasiarová, E. Rudnayová, J. Kovalík, J. Dusza, M. Hnatko, P. Sajgalik, A. Merstallinger:
    "Wear and Creep Characteristics of a Carbon-Derived Si3N4/SiC Micro/Nanocomposite";
    Materialwissenschaft und Werkstofftechnik, Volume 34 (2003), Issue 4; S. 338 - 342.

  8. Autor/innen: Stefanie Kloß, ERT; F. Zehetner; Alex Dellantonio; Raad Hamid, ERT; F. Ottner, ARC; Volker Liedtke, AAC; Martin Gerzabek , ARC; Gerhard Soja, HBR

    S. Kloß, F. Zehetner, A. Dellantonio, R. Hamid, F. Ottner, V. Liedtke, M. Gerzabek , G. Soja:
    ""Characterization of Slow Pyrolysis Biochars: Effects of Feedstocks and Pyrolysis Temperature on Biochar Properties";
    Journal of Environmental Quality, 41 (2012), S. 990 - 1000.

  9. Autor/innen: B. Leclercq; R. Mévrel; Volker Liedtke, AAC; Wolfgang Hohenauer, ADG

    B. Leclercq, R. Mévrel, V. Liedtke, W. Hohenauer:
    "Thermal conductivity of zirconia-based ceramics for thermal barrier coating";
    Materialwissenschaft und Werkstofftechnik, Volume 34 (2003), Issue 4; S. 406 - 409.

  10. Autor/innen: B. Leclercq; R. Mévrel; Volker Liedtke, AAC; Wolfgang Hohenauer, ADG

    B. Leclercq, R. Mévrel, V. Liedtke, W. Hohenauer:
    "Thermal conductivity of zirconia-based ceramics for thermal barrier coating";
    Materialwissenschaft und Werkstofftechnik, Volume 34 (2003), Issue 4; S. 406 - 409.

  11. Autor/innen: Andreas Merstallinger, AAC; Sales Muriel, AAC; Ernst Semerad, AAC; B.D. Dunn, ALT

    A. Merstallinger, Sales Muriel, E. Semerad, B.D. Dunn:
    ""Cold welding in hold down points of space mechanisms due to impact and fretting"";
    Engineering Tribology, JET307 # IMechE 2008, Vol. 222 Part J : J (2008).

  12. Autor/innen: Grazyna Mozdzen, AAC; Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Mozdzen, Ch. Stocker, K. Spiradek-Hahn, M. Brabetz:
    "Erfassung der Ausscheidungszustän-de in einem hochwarmfesten 9%Cr-Stahl mittels elektrochemischer Phasenisolierung";
    Praktische Metallographie, Sonder (2003), band 34; S. 349 - 365.

  13. Autor/innen: Grazyna Mozdzen, AAC; Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Mozdzen, Ch. Stocker, K. Spiradek-Hahn, M. Brabetz:
    "Erfassung der Ausscheidungszustände in einem hochwarmfesten 9%-Cr Stahl mittels elektrochemischer Phasenisolierung";
    Praktische Metallographie, (2004), Band 41; S. 605 - 618.

  14. Autor/innen: Ulf Persson, ARC; Hariharan Chandrasekaran , ARC; Andreas Merstallinger, AAC

    U. Persson, Chandrasekaran , A. Merstallinger:
    "Adhesion between some tool and work materials in fretting and relation to metal cutting";
    WEAR, Vol. 249 (2001), S. 293 - 301.

  15. Autor/innen: A. Ramalho, ARC; Andreas Merstallinger, AAC; A. Cavaleiro, ARC

    A. Ramalho, A. Merstallinger, A. Cavaleiro:
    "Fretting behaviour of W-Si coated steels in vacuum environments";
    ICEMS-Coimbra Portugal, 261 (2006), S. 79 - 85.

  16. Autor/innen: M. Röding; R. Duwe; W. Kühlein, LKR [(keine)]; J. Linke, Forschungszentrum Jü; Michael Scheerer, AAC; Ivica Smid, ARC; B. Wiechers

    M. Röding, R. Duwe, W. Kühlein, J. Linke, M. Scheerer, I. Smid, B. Wiechers:
    "Testing of Actively Cooled High Heat Flux Mock-Ups";
    Journal of Nuclear Materials, Vol.258-263 (1998).

  17. Autor/innen: Sandrine Rouquié , ARC; Lafarie-Frenot Marie-Christine, Laboratoire de Mecan; Anneliese Pönninger, AAC; Walter Constin, AMAT

    S. Rouquié , Lafarie-Frenot Marie-Christine, A. Pönninger, W. Constin:
    "Thermal cycling under vacuum and CME evaluation of carbon/epoxy laminates";
    Materialwissenschaft und Werkstofftechnik, Vol. 34 (2003), Nr.4; S. 354 - 358.

  18. Autor/innen: Sandrine Rouquié , ARC; Lafarie-Frenot Marie-Christine, Laboratoire de Mecan; Anneliese Pönninger, AAC; Walter Constin, AMAT

    S. Rouquié , Lafarie-Frenot Marie-Christine, A. Pönninger, W. Constin:
    "Thermal cycling under vacuum and CME evaluation of carbon/epoxy laminates";
    Materialwissenschaft und Werkstofftechnik, Vol. 34 (2003), Nr.4; S. 354 - 358.

  19. Autor/innen: Friedrich Rüdenauer, AMAT; Walter Costin, AMAT; Grazyna Mozdzen, AAC; Ernst Semerad, AAC

    F. Rüdenauer, W. Costin, G. Mozdzen, E. Semerad:
    "FIB deposition";
    Advanced Engineering Materials, 9 (2007), S. 708 - 711.

  20. Autor/innen: Sales Muriel, AAC; Andreas Merstallinger, AAC; Pierre Brunet, ARC; de Weerd Marie-Cécile, CNRS; Khare Varsha, CNRS; Gerhard Traxler, PROFA; Jean-Marie Dubois , ARC

    Sales Muriel, A. Merstallinger, P. Brunet, de Weerd Marie-Cécile, Khare Varsha, G. Traxler, Dubois:
    "COLD WELDING AND FRETTING TESTS ON QUASICRYSTALS AND RELATED COMPOUNDS";
    Philosophical Magazine, Vol 86 (2005), S. 965 - 970.

  21. Autor/innen: Sales Muriel, AAC; Andreas Merstallinger, AAC; A.I. Ustinov, E.O.Paton Electric W; S.S. Polishchuk, G.V. Kurdjumov Insti; T.V. Melnichenko

    Sales Muriel, A. Merstallinger, A.I. Ustinov, S.S. Polishchuk, T. Melnichenko:
    "Effect of the addition of crystalline β-phase in Al-Cu-Fe quasicrystalline";
    Surface and Coatings Technology, 201 (2007), S. 6206 - 6211.

  22. Autor/innen: Rudolf Schaudy, HE-X; Josef Wendrinsky, AAC; Rudolf Josef Beer, ARC; Josef Eberhardsteiner, ARC

    R. Schaudy, J. Wendrinsky, R. Beer, J. Eberhardsteiner:
    "Fixation of three-dimensional states of deformation in polymers by ionizing radiation - II. Basic fixation experiments.";
    Radiation Protection Dosimetry, 51(2) (1998), S. 147 - 153.

  23. Autor/innen: Rudolf Schaudy, HE-X; Josef Wendrinsky, AAC; Rudolf Josef Beer, ARC; Josef Eberhardsteiner, ARC

    R. Schaudy, J. Wendrinsky, R. Beer, J. Eberhardsteiner:
    "Fixation of three-dimensional states of deformation in polymers by ionizing radiation - III. Experimental results and implementation";
    Radiation Physics and Chemistry, 52 (1-6) (1998), S. 243 - 246.

  24. Autor/innen: Michael Scheerer, AAC; H. Bolt, ARC; J. Linke, Forschungszentrum Jü; R. Lison, Forschungszentrum Jü; H. Sauer, Forschungszentrum Jü; Ivica Smid, ARC; R. Uhlemann, Forschungszentrum Jü

    M. Scheerer, H. Bolt, J. Linke, R. Lison, H. Sauer, I. Smid, R. Uhlemann:
    "Thermomechanical behaviour of actively cooled divertor elements with internal coolant flow return";
    Fusion Engineering and Design, 00 (2000), S. 6.

    Zusätzliche Informationen

  25. Autor/innen: R Schneider; R. J. Grant, Glyndŵr Univers; Nikolay Sotirov, LKR; Georg Falkinger, LKR; Florian Grabner, LKR; Christoph Reichl, TES; Michael Scheerer, AAC; B Heine, Aalen University; Z Zouaoui

    R. Schneider, R. Grant, N. Sotirov, G. Falkinger, F. Grabner, C. Reichl, M. Scheerer, B. Heine, Z. Zouaoui:
    "Constitutive flow curve approximation of commercial aluminium alloys at low temperatures";
    Materials & Design, Volume 88 (2015), S. 659 - 666.

  26. Autor/innen: Ivica Smid, ARC; Erich Kny, W; Michael Scheerer, AAC; Peter Alexander Hahn, AMAT; Georg Korb, PTC; J. Linke, Forschungszentrum Jü; G. Vieider

    I. Smid, E. Kny, M. Scheerer, P. Hahn, G. Korb, J. Linke, G. Vieider:
    "Non-Destrucvtive Characterization of Plasma-Sprayed Tungsten and Braze-Joints for Fusion by Ultra-Sonic Examination";
    Fusion Engineering and Design, Vol.42 (1998), Nr.1-4; S. 511 - 517.

  27. Autor/innen: Gerhard Soja, HBR; Sophie Zechmeister-Boltenstein, HE-X [(keine)]; B. Kitzler; Maximilian Lauer; Volker Liedtke, AAC; Andrea Watzinger, ERT; Bernhard Wimmer, ERT; F. Zehetner

    G. Soja, S. Zechmeister-Boltenstein, B. Kitzler, M. Lauer, V. Liedtke, A. Watzinger, B. Wimmer, F. Zehetner:
    "Biokohle für landwirtschaftliche Böden";
    Gaia-Ecological Perspectives For Science And Society, 21 (2012), 3; S. 238 - 240.

  28. Autor/innen: Nikolay Sotirov, LKR; Georg Falkinger, LKR; Florian Grabner, LKR; G Schmid, LKR; R Schneider; R. J. Grant, Glyndŵr Univers; R Kelsch, voestalpine Polynorm; Michael Scheerer, AAC; Christoph Reichl, TES; H Sehrschön, Fill GmbH; M Loipetsberger, Linde Gas

    N. Sotirov, G. Falkinger, F. Grabner, G. Schmid, R. Schneider, R. Grant, R. Kelsch, M. Scheerer, C. Reichl, H. Sehrschön, M. Loipetsberger:
    "Improved Formability of AA5182 Aluminium Alloy Sheet at Cryogenic Temperatures";
    Materials Today: Proceedings, Volume 2, Supplement 1 (2015), S. 113 - 118.

  29. Autor/innen: Astrid Stadler, AC2T; Josef Brenner, ARC; Andreas Pauschitz, AC2T; Josef Wendrinsky, AAC; Andreas Schindel, AAC; Gerhard Nauer, ECHEM

    A. Stadler, J. Brenner, A. Pauschitz, J. Wendrinsky, A. Schindel, G. Nauer:
    "Surface Analysis of Different Boundary Layers on Steel Discs Formed in a Lubricated Tribocontact During Laboratory Test Compared with Field Application";
    Analytical and Bioanalytical Chemistry, 390 (6) (2008), S. 1527 - 1535.

  30. Autor/innen: Stephan Ucsnik, LKR; Michael Scheerer, AAC; S. Zaremba; D. H. Pahr

    S. Ucsnik, M. Scheerer, S. Zaremba, D. Pahr:
    "Experimental Investigation of a novel hybrid Metal-Composite Joining Technology";
    Composites Part A: Applied Science and Manufacturing, 1 (2009), 1; S. 1 - 2.

  31. Autor/innen: Q. Yang, ARC; Walter Lengauer, Institute for Chemic; Thomas Koch, Institute of Materia; Michael Scheerer, AAC; Ivica Smid, ARC

    Q. Yang, W. Lengauer, T. Koch, M. Scheerer, I. Smid:
    "Hardness and elastic properties of Ti(CxN1-x), Zr(CxN1-x) and Hf(CxN1-x)";
    Journal of Alloys and Compounds, Vol. 309 (2000), S. 5 - 9.

  32. Autor/innen: Rudolf Zauner, AMAT; Michael Scheerer, AAC

    R. Zauner, M. Scheerer:
    "Qualification of material DIN 1.4404 (316L) for liquid hydrogen storage applications";
    Powder Injection Moulding International, Vol. 1 (2007), No. 4; S. 60 - 62.


Buchbeiträge


  1. Autor/innen: Gerhard Soja, HBR; Elena Anders, ERT; Jannis Bücker, ERT; Sonja Feichtmair, ERT; Stefan Gunczy; Jasmin Karer, ERT; B. Kitzler; Michaela Klinglmüller; Stefanie Kloß, ERT; Maximilian Lauer; Volker Liedtke, AAC; Franziska Rempt, ERT; Andrea Watzinger, ERT; Bernhard Wimmer, ERT; S. Zechmeister-Boltenstern; F. Zehetner

    G. Soja, E. Anders, J. Bücker, S. Feichtmair, S. Gunczy, J. Karer, B. Kitzler, M. Klinglmüller, S. Kloß, M. Lauer, V. Liedtke, F. Rempt, A. Watzinger, B. Wimmer, S. Zechmeister-Boltenstern, F. Zehetner:
    "Biochar: A Regional Supply Chain Approach in View of Climate Change Mitigation";
    in: "Biochar: A Regional Supply Chain Approach in View of Climate Change Mitigation", Cambridge University Press, Cambridge, UK, 2016, S. 291 - 314.


Beiträge in Tagungsbänden


  1. Autor/innen: D. Horwatitsch, LKR; Rudolf Gradinger, LKR; Andreas Merstallinger, AAC

    D. Horwatitsch, R. Gradinger, A. Merstallinger:
    "Determination of Friction in Bulk Metal Forming Using Ring Compression Test";
    in: "Proceedings: Junior EuroMAT 2006", Eigenverlag, 2006.

  2. Autor/innen: Christopher Huber, ILSB-TUW; Sascha Kremmer, BUAG; Andreas Merstallinger, AAC; Heinz Pettermann, ARC

    C. Huber, S. Kremmer, A. Merstallinger, Heinz Pettermann:
    "Numerical Simulation of composites - Thermoelastic friction analysis and its limitation due to thermoelastic instability";
    in: "Proc. 6th Europ. Solid Mechanics Conference ESMC2006", Eigenverlag, Budapest, 2006.

  3. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, F. Haruvy Yaara:
    "Engineering-Scale fabrication and space-environment testing for Re-Entry C-SiC Ceramic Matrix Composites and Oxygen Protective Systems made by the Fast Sol-Gel";
    in: "Materials in a Space Environment", Eigenverlag, Collioure (France), 2006.

  4. Autor/innen: Volker Liedtke, AAC; K. Mergia; Th. Speliotis; G. Apostolopoulos; S. Messoloras

    V. Liedtke, K. Mergia, T. Speliotis, G. Apostolopoulos, S. Messoloras:
    ""Thermo-Mechanical Behaviour of HfO2 Coatings For Aerospace Applications"";
    in: "Advanced Materials Research Vol. 59", Trans Tech Publications ltd, 2008, S. 87 - 91.

  5. Autor/innen: Andreas Merstallinger, AAC; Erich Neubauer, PTC; Vincent Calard, AAC

    A. Merstallinger, E. Neubauer, V. Calard:
    "SELF-LUBRICATING COPPER COMPOSITES FOR DRY FRICTION IN "ALL" ENVIRONMENTS";
    in: "Tribology of Alternative Fuels and Ecolubricants", Eigenverlag, Wien, 2006, ISBN: 3-901657-21-5.

  6. Autor/innen: Anneliese Pönninger, AAC; Brigitte Defoort, EADS Launch Vehicles

    A. Pönninger, B. Defoort:
    "Determination of The Coefficient of Moisture Expansion (CME)";
    in: "Proceedings 9th International Symposium on Materials in a Space Environment", ESA, Noordwijk, 2003.

  7. Autor/innen: Anneliese Pönninger, AAC; Marianne Kiniger, AMAT [(keine)]

    A. Pönninger, M. Kiniger:
    "Coefficient of moisture expansion (CME) and thermal expansion (CTE) of printed circuit boards";
    in: "Proceedings of 10th ISMSE", Eigenverlag, Colliure, 2006.

  8. Autor/innen: Sales Muriel, AAC; Grazyna Mozdzen, AAC; Andreas Schindel, AAC; Josef Wendrinsky, AAC; Andreas Merstallinger, AAC

    Sales Muriel, G. Mozdzen, A. Schindel, J. Wendrinsky, A. Merstallinger:
    "NANO-COMPOSITE COATINGS FOR DECREASING WEAR AND FRICTION (NANO-SCHICHTEN FÜR DIE TRIBOLOGIE)";
    in: "ÖTG Symposium 2006", Eigenverlag, Steyr, 2006, S. 1 - 8.

  9. Autor/innen: Sales Muriel, AAC; Andreas Merstallinger, AAC; Andreas Schindel, AAC; Josef Wendrinsky, AAC; Lubos Baca, PTC

    Sales Muriel, A. Merstallinger, A. Schindel, J. Wendrinsky, L. Baca:
    "Nano-polymer Coatings For Tribological Applications";
    in: "16th International Colloquium Tribology, Lubricants, Materials and Lubrication Engineering", Eigenverlag, Stuttgart / Ostfildern, Germany, 2008, S. 1 - 2.

  10. Autor/innen: L.V. Santor, LAS/INPE; V.J. Trava-Airoldi, LAS/INP; J. Rodriguez; L.R. Bonetti, ITA; E.J. Corat, LAS/INPE; Sales Muriel, AAC; Andreas Merstallinger, AAC

    L. Santor, V. Trava-Airoldi, J. Rodriguez, L. Bonetti, E. Corat, Sales Muriel, A. Merstallinger:
    "PRELIMINARY STUDIES OF DLC FILMS DEPOSITED ON Ti6Al4V SUBSTRATE AS SPATIAL SLIDING PARTS";
    in: "Conf. On San Diego", Eigenverlag, 2006.


Vorträge und Posterpräsentationen (mit Tagungsband-Eintrag)


  1. Autor/innen: Josef Brenner, ARC; Andreas Merstallinger, AAC; Markus Ungerank, ARC; Heimo Bieringer, ARC

    J. Brenner, A. Merstallinger, M. Ungerank, H. Bieringer:
    "FRICTION AND WEAR BEHAVIOUR OF P84 POLYIMIDES AND ITS COMPOUNDS: INFLUENCE OF COUNTERPART AND TEMPERATURE";
    Vortrag: ÖTG Symposium 2005, FH Graz; 2005; in: "ÖTG Symposium 2005", Tagungsband "ÖTG Symposium 2005" Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-20-7.

  2. Autor/innen: Nicole Dörr, AC2T; Tamas Sebestyén, AC2T; Friedrich Franek, AC2T; Andreas Merstallinger, AAC; Wolfgang Pahl, GKN

    N. Dörr, T. Sebestyén, F. Franek, A. Merstallinger, W. Pahl:
    "ALTERNATIVE LUBRICATING FLUIDS FOR POROUS METAL BEARINGS";
    Vortrag: ÖTG Symposium 2005, FH Graz; 2005; in: "ÖTG Symposium 2005", Tagungsband "ÖTG Symposium 2005" Österreichische Tribologische Gesellschaft, Wien (2005), ISBN: 3-901657-19-3.

  3. Autor/innen: Angelo Genovese, AMAT; Martin Tajmar, SPA; Buldrini Nembo, AMAT; Michael Scheerer, AAC; Ernst Semerad, AAC

    A. Genovese, M. Tajmar, Buldrini Nembo, M. Scheerer, E. Semerad:
    "Indium FEEP Multiemitter Development and Test Results";
    Vortrag: AIAA Joint Propulsion Conference, Fort Lauderdale; 11.07.2004 - 14.07.2004; in: "AIAA Joint Propulsion Conference 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference", American Institute of Aeronautics and Astronautics, Reston, Va. (2004), Paper No. 3620.

  4. Autor/innen: Peter Alexander Hahn, AMAT; Thomas Goss, AMAT [(keine)]; Alfred Karlovsky, AMAT; Michael Scheerer, AAC; Anneliese Pönninger, AAC; Elisabeth Ladstätter, FACC

    P. Hahn, T. Goss, A. Karlovsky, M. Scheerer, A. Pönninger, E. Ladstätter:
    "An Algorithm for Life Time Prediction of Fatigue Loaded CFRP-Structures Derived from the Rate of Acoustic Emission";
    Vortrag: Fourth European Workshop on Structural Health Monitoring, Krakow, Poland; 02.07.2008 - 04.07.2008; in: "Proceedings of the Fourth European Workshop STRUCTURAL HEALTH MONITORING 2008", (2008), S. 1175 - 1185.

  5. Autor/innen: Yair Haruvy, ARC; Volker Liedtke, AAC

    Y. Haruvy, V. Liedtke:
    "Sol-gel derived C-SiC composites for re-entry structures";
    Vortrag: 9th International Symposium on Materials in a Space Environment, Noordwijk; 16.06.2003 - 20.06.2003; in: "9th International Symposium on Materials in a Space Environment", ESA Publications Division, Noordwijk (2003), ISBN 92-9092-850-6 SP-540; S. 67 - 74.

  6. Autor/innen: Marianne Hörlesberger, IP; Anneliese Pönninger, AAC
    Andere beteiligte Person: Yasser Hosni, University of Ce ...

    M. Hörlesberger, A. Pönninger:
    "The Visibility of Austria in Aeronautical Research";
    Vortrag: 19th International Conference on Management of Technology - IAMOT 2010, Cairo; 07.03.2010 - 11.03.2010; in: "IAMOT 2010 - 19th International Conference on Management of Technology - Conference Proceedings", Y. Hosni (Hrg.); (2010), ISBN: 0-9815817-3-0.

  7. Autor/innen: Jelena Horky, HBS; Bernhard Mingler, HBS; Grazyna Mozdzen, AAC; Maciej Krystian, HBS; Laszlo Sajti, HBS

    J. Horky, B. Mingler, G. Mozdzen, M. Krystian, L Sajti:
    "Load-bearing capacity of low alloyed Mg-Zn-Ca during degradation";
    Vortrag: 11th Symposium on Biodegradable Metals, Alicante, Spanien; 25.08.2019 - 30.08.2019; in: "Abstract Book 11th Biometal", (2019).

  8. Autor/innen: Dieter Horwatitsch, LKR; Andreas Merstallinger, AAC; K. Steinhoff, Lehrstuhl für Um ...

    D. Horwatitsch, A. Merstallinger, K. Steinhoff:
    "Evaluation of the Ring Compression Test for the Parameter Determination of Extended Fritction Models";
    Vortrag: ICAA 13, Pittsburgh; 03.06.2012 - 07.06.2012; in: "ICAA 13", Wiley, 1 (2012), ISBN: 978-1-118-458044; Paper-Nr. 675, 680 Seiten.

  9. Autor/innen: Dieter Horwatitsch, LKR; Andreas Merstallinger, AAC; K. Steinhoff, Lehrstuhl für Um ...
    Andere beteiligte Person: Dieter Horwatitsch, LKR

    D. Horwatitsch, A. Merstallinger, K. Steinhoff:
    "Vergleich von zwei Reibungstestmethoden für die Simulation von Umformprozessen";
    Vortrag: ÖTG-Symposium, Graz; 28.11.2013; in: "ÖTG Symposium 2013", D. Horwatitsch (Hrg.); (2013).

  10. Autor/innen: D. Horwatitsch, LKR; K Steinhoff, Kassel; Rudolf Gradinger, LKR; Andreas Merstallinger, AAC

    D. Horwatitsch, K. Steinhoff, R. Gradinger, A. Merstallinger:
    ""Determination of friction conditions for implementation in FEM based process simulation of backward can extrusion"";
    Vortrag: Oral presentation and proceedings, Esslingen; 15.01.2008 - 17.01.2008; in: "16th International Colloquium Tribology", (2008).

  11. Autor/innen: Stefanie Kloß, ERT; F. Zehetner; Alex Dellantonio; Bernhard Wimmer, ERT; Raad Hamid, ERT; Volker Liedtke, AAC; F. Ottner, ARC; M.H. Gerzabek, ALT; Gerhard Soja, HBR

    S. Kloß, F. Zehetner, A. Dellantonio, B. Wimmer, R. Hamid, V. Liedtke, F. Ottner, M.H. Gerzabek, G. Soja:
    "Biochar for carbon sequestration in soil-Effect of feedstock and pyrolysis conditions on physical and chemical biochar characteristics";
    Poster: European Geosciences Union General Assembly 2013, Vienna; 03.04.2011 - 08.04.2011; in: "EGU2011-4914", (2011).

  12. Autor/innen: Rudolf Königshofer, Vienna University of; Antje Liersch, Vienna University of; Walter Lengauer, Vienna University of; Thomas Koch, Institute of Materia; Michael Scheerer, AAC; Wolfgang Hohenauer, ADG

    R. Königshofer, A. Liersch, W. Lengauer, T. Koch, M. Scheerer, W. Hohenauer:
    "Solid-state properties of binary, ternary and quaternary transition metal carbonitrides";
    Vortrag: PM2004, Wien; 2004; in: "PM2004", European Powder Metallurgy Association, Shrewsbury (2004), 0.

  13. Autor/in: Volker Liedtke, AAC

    V. Liedtke:
    "Re-Entry Simulation Chamber for thermo-mechanical characterisation of space materials";
    Vortrag: 9th International Symposium on Materials in a Space Environment, Noordwijk; 16.06.2003 - 20.06.2003; in: "9th International Symposium on Materials in a Space Environment", ESA Publications Division, Noordwijk (2003), ISBN 92-9092-850-6 SP-540; S. 461 - 465.

  14. Autor/innen: Volker Liedtke, AAC; F. Haruvy Yaara, ARC; Huertas Olivares Inmaculada, AMAT [(keine)]; Ernst Semerad, AAC

    V. Liedtke, F. Haruvy Yaara, Huertas Olivares Inmaculada, E. Semerad:
    "Novel CMC manufacturing by fast-sol-gel Process - FABRICATION, characterisation, and upscaling issues for EXPERT applications";
    Vortrag: EXPERT Session in The 5th European Workshop on Thermal Protection Systems and Hot Structures, Noordwijk, the Netherlands; 17.05.2006 - 19.05.2006; in: "EXPERT Session in The 5th European Workshop on Thermal Protection Systems and Hot Structures", (2006), -.

  15. Autor/innen: T. Liska, Institute of Chemica; T. Rohr, Institute of Chemica; Walter Grienauer, FM-PTC; Josef Wendrinsky, AAC; S. Knaus, Institute of Chemica

    T. Liska, T. Rohr, W. Grienauer, J. Wendrinsky, S. Knaus:
    "Copolymerisable Carbohydrate Modified Photoinitiators";
    Vortrag: RadTech Europe 99, Berlin; 08.11.1999 - 10.11.1999; in: "RadTech Europe 99", (1999), S. 751 - 756.

  16. Autor/innen: Andreas Merstallinger, AAC; Markus Fink, AMAT; Erich Neubauer, PTC; J. Eder, ALT; Christian Holzapfel, Schleifring; J. Rehder; Rene Seiler, ESTEC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, M. Fink, E. Neubauer, J. Eder, C. Holzapfel, J. Rehder, R. Seiler, L. Gaillard , L. Pambaguian:
    ""Self-lubricating Copper Composites for Tribological applications in Ambient, Dry and Vacuum conditions"";
    Vortrag: Oral presentation and proceedings, Esslingen; 15.01.2008 - 17.01.2008; in: "16th International Colloquium Tribology", (2008).

  17. Autor/innen: Andreas Merstallinger, AAC; Lionel Gaillard , ARC; Heimo Bieringer, ARC

    A. Merstallinger, L. Gaillard , H. Bieringer:
    "Tribologische Friction and wear of Self Lubricating Polyimides in vacuum and air up to high temperatures";
    Vortrag: 14th Int. Colloquium Tribology, Esslingen; 13.01.2004 - 15.01.2004; in: "14th Int. Colloquium Tribology", Technische Akademie Esslingen, Vol. II Ostfildern (2004), ISBN: 3-924813-54-x.

  18. Autor/innen: Andreas Merstallinger, AAC; Wolfgang Lacom, AMAT

    A. Merstallinger, W. Lacom:
    "Influence of environment and material condition on Wear and cold welding of particulate reinforced Aluminium alloys";
    Vortrag: 11th International Colloquium Tribology, Technische Akdadmie Esslingen; 13.01.1998 - 15.01.1998; in: "11th International Colloquium Tribology", Vol. III (1999), S. 1879 - 1882.

  19. Autor/innen: Andreas Merstallinger, AAC; Ernst Semerad, AAC; Barry Dunn, ARC

    A. Merstallinger, E. Semerad, B. Dunn:
    "Effects of Fretting under various environments (vacuum, Helium, air) on cold welding between titanium and Stainless steel 440C";
    Vortrag: 11th International Colloquium Tribology, Technische Akdadmie Esslingen; 13.01.1998 - 15.01.1998; in: "11th International Colloquium Tribology", Vol. III (1999), S. 1883 - 1888.

  20. Autor/innen: Andreas Merstallinger, AAC; Ernst Semerad, AAC; Barry Dunn, ARC

    A. Merstallinger, E. Semerad, B. Dunn:
    "Influence of impact parameter and coatings on cold welding due to impact under high vacuum";
    Vortrag: ESMATS 99, 1999; in: "ESMATS 99", (1999).

  21. Autor/innen: Andreas Merstallinger, AAC; Ernst Semerad, AAC; Barry Dunn, ARC

    A. Merstallinger, E. Semerad, B. Dunn:
    "Influence of impact parameters and coatings on cold welding due to impact under high vacuum";
    Vortrag: 8th European Space Mechanisms and Tribology Symposium, Toulouse; 01.10.1999 - 31.10.1999; in: "8th European Space Mechanisms and Tribology Symposium", Holland (1999), S. 5.

  22. Autor/in: Grazyna Mozdzen, AAC

    G. Mozdzen:
    "Gefügecharakterisierung des Gußeisens mit Kugelgraphit mittels automatischen Bildanalysensystemen";
    Vortrag: Metallographietagung, Ulm; 17.09.2001 - 21.09.2001; in: "Metallographietagung", (2001), Poster; S. 1.

  23. Autor/innen: Laurent Pambaguian, ARC; Andreas Merstallinger, AAC

    L. Pambaguian, A. Merstallinger:
    "Self-Lubricating Copper matrix composites with high contents of lubricants";
    Vortrag: World Tribology Congress, Vienna; 04.09.2001 - 05.09.2001; in: "World Tribology Congress", EIgenverlag, Wien (2001), ISBN: 3-901657-08-8; S. 6.

  24. Autor/innen: Anneliese Pönninger, AAC; Miroslav Henzel, AAC; Michael Scheerer, AAC; Elisabeth Ladstätter, FACC

    A. Pönninger, M. Henzel, M. Scheerer, E. Ladstätter:
    ""The effect of tension-tension fatigue and lay-up configuration on damage accumulation in carbon/epoxy composites"";
    Vortrag: 13th European Conference on Composites Materials, Stockholm; 02.06.2008 - 05.06.2008; in: "Proc. 13th European Conference on Composite Materials, No. 907", (2008).

  25. Autor/innen: A. Ramalho, ARC; Andreas Merstallinger, AAC; A. Cavaleiro, ARC

    A. Ramalho, A. Merstallinger, A. Cavaleiro:
    "Fretting behaviour5 of W-Si coated steels in vacuum environments";
    Vortrag: NordTrib 2004, Norway; 01.06.2004 - 05.06.2004; in: "NordTrib 2004", Eigenverlag, Lancashire (2004), 0.

  26. Autor/innen: Sales Muriel, AAC; Andreas Merstallinger, AAC; Andreas Schindel, AAC; Josef Wendrinsky, AAC

    Sales Muriel, A. Merstallinger, A. Schindel, J. Wendrinsky:
    ""Nano-polymer coatings for tribological applications"";
    Vortrag: Oral presentation and proceedings, Esslingen; 15.01.2008 - 17.01.2008; in: "16th International Colloquium Tribology", (2008).

  27. Autor/innen: Michael Scheerer, AAC; H. Bolt, ARC; A. Gervash, ARC; J. Linke, Forschungszentrum Jü; R. Lison, Forschungszentrum Jü; Ivica Smid, ARC

    M. Scheerer, H. Bolt, A. Gervash, J. Linke, R. Lison, I. Smid:
    "Development, Thermomechanical Analysis, Fabrication and Testing of Macroblock-Divertor Specimens";
    Vortrag: 20th Symposium on Fusion Technology, Marseille, Frankreich; 01.09.1998 - 30.09.1998; in: "20th Symposium on Fusion Technology", (1998), S. 71 - 74.

  28. Autor/innen: Michael Scheerer, AAC; Thomas Goss, AMAT [(keine)]; Peter Alexander Hahn, AMAT; Alfred Karlovsky, AMAT; Michael Marischler, AMAT; Anneliese Pönninger, AAC; Richard Wagner, AAC; Klaus Brunnhofer, MAGNA STEYR; Elisabeth Ladstätter, FACC

    M. Scheerer, T. Goss, P. Hahn, A. Karlovsky, M. Marischler, A. Pönninger, R. Wagner, K. Brunnhofer, E. Ladstätter:
    "Enhanced Damage and Life Time Prognosis of CFRP- Structures by means of Combined Time-Frequency-Based Acoustic Emission Feature Extraction and FBG Spectrum Analysis";
    Vortrag: Fourth European Workshop on Structural Health Monitoring, Krakow, Poland; 02.07.2008 - 04.07.2008; in: "Proceedings of the Fourth European Workshop STRUCTURAL HEALTH MONITORING 2008", (2008), S. 1186 - 1194.

  29. Autor/innen: Jens Schmidt, German Aerospace Cen; Jan Schulte-Fischedick, German Aerospace Cen; Emanuela Cordano, Ansaldo Richerche S.; Carla Mao, Ansaldo Richerche S.; Volker Liedtke, AAC; Richard Fordham, Joint Research Centr

    J. Schmidt, J. Schulte-Fischedick, E. Cordano, C. Mao, V. Liedtke, R. Fordham:
    "CMC TUBES BASED ON C/C-SIC WITH HIGH OXIDATION AND CORROSION RESISTENCE";
    Vortrag: 5th international conference on high temperature ceramic matrix composites (HTCMC 5), Seattle, USA; 12.09.2004 - 16.09.2004; in: "5th international conference on high temperature ceramic matrix composites (HTCMC 5)", (2004), HTCMC 5; S. 531 - 536.

  30. Autor/innen: Javier Segurado, AMAT; Heinz Pettermann, ARC; Andreas Merstallinger, AAC

    J. Segurado, Heinz Pettermann, A. Merstallinger:
    "Numerical simulations in tribology - A Micro-mechanics of materials approach";
    Vortrag: World Tribology Congress, Vienna; 04.09.2001 - 05.09.2001; in: "World Tribology Congress", Eigenverlag, Wien (2001), ISBN: 3-901657-08-8; S. 5.

  31. Autor/in: Ernst Semerad, AAC

    E. Semerad:
    "ESA/EU Material Testhouse and Aerospace Competence Network";
    Vortrag: Workshop on Austrian Space Activities in Engineering and Materials Technology, Vienna; 28.01.1999 - 28.01.1999; in: "Workshop on Austrian Space Activities in Engineering and Materials Technology Proceedings auf ARCS homepage", (1999).

  32. Autor/in: Ernst Semerad, AAC

    E. Semerad:
    "On the contribution of surface and bulk phonons to the inelastic scattering of Ne-atoms on LiF";
    Vortrag: Seminar on interactions of molecular beams with solid surfaces., Santa Margherita, Italy.; 19.05.1982 - 22.05.1982; in: "Seminar on interactions of molecular beams with solid surfaces.", (1982).

  33. Autor/innen: Gerhard Soja, HBR; Stefanie Kloß, ERT; Andrea Watzinger, ERT; Jannis Bücker, ERT; Franziska Rempt, ERT; F. Zehetner; Sophie Zechmeister-Boltenstein, HE-X [(keine)]; B. Kitzler; Maximilian Lauer; Volker Liedtke, AAC; Bernhard Wimmer, ERT

    G. Soja, S. Kloß, A. Watzinger, J. Bücker, F. Rempt, F. Zehetner, S. Zechmeister-Boltenstein, B. Kitzler, M. Lauer, V. Liedtke, B. Wimmer:
    "Chancen and Risken einer Anwendung von Biochar auf landwirtschaftlichen Böden";
    Vortrag: ALVA - Arbeitsgemeinschaft für Lebensmittelveterinär- und Agrarwesen, Graz; 23.05.2011 - 24.05.2011; in: "66. ALVA-Tagung", (2011).

  34. Autor/innen: Gerhard Soja, HBR; Stefanie Kloß, ERT; Bernhard Wimmer, ERT; Andrea Watzinger, ERT; F. Zehetner; S. Zechmeister-Boltenstern; Maximilian Lauer; B. Kitzler; Volker Liedtke, AAC

    G. Soja, S. Kloß, B. Wimmer, A. Watzinger, F. Zehetner, S. Zechmeister-Boltenstern, M. Lauer, B. Kitzler, V. Liedtke:
    "Biokohle als Bodenzuschlagsstoff: Nährstoffverfügbarkeit und Ertragsauswirkungen.";
    Vortrag: 67. ALVA-Tagung: Lehr- und Forschungszentrum für Gartenbau Schönbrunn, Vienna, Austria; 04.06.2012 - 05.06.2012; in: "ALVA Tagungsbericht 2012: Ernährung sichern - trotz begrenzter Ressourcen", (2012), S. 177 - 179.

  35. Autor/innen: Stephan Ucsnik, LKR; Alexander Großalber, LKR; Josef Reiter, LKR; Michael Scheerer, AAC; Grazyna Mozdzen, AAC

    S. Ucsnik, A. Großalber, J. Reiter, M. Scheerer, G. Mozdzen:
    "Advances in coninuous carbon fibre reinforced Aluminium matrix composites";
    Vortrag: EUCASS 2019, Madrid; 01.07.2019 - 04.07.2019; in: "Proceedings of 8th European conference for aeronautics and space sciences (EUCASS2019)", 783 (2019), S. # - ?.

  36. Autor/innen: Christian Wögerer, Profactor; Josef Wendrinsky, AAC; Christine Löcker, ECHEM; Nicolett Kiss, ECHEM; Norica Godja, ECHEM

    C. Wögerer, J. Wendrinsky, C. Löcker, N. Kiss, N. Godja:
    "Continuous Manufacturing of Photocatalyc Nanoparticles and Incorporation (TiO2) during Electrocemical Plating Processes";
    Vortrag: International Conference of Functional Nanocoatings, Budapest; 30.03.2008 - 02.04.2008; in: "Proceedings of the International Conference of Functional Nanocoatings", (2008).

  37. Autor/innen: R. Wörgötter-Plunger, W; Walter Buchgraber , W; Korab Jurai, W; Michael Scheerer, AAC; Wolfgang Hohenauer, ADG; Ivica Smid, ARC; M. Anwander; P. Sebo, ARC

    R. Wörgötter-Plunger, Buchgraber , Korab Jurai, M. Scheerer, W. Hohenauer, I. Smid, M. Anwander, P. Sebo:
    "Carbon Fiber Reinforced Copper as Heat Sink Material for Divertor Applications";
    Vortrag: 20th Symposium on Fusion Technology, Marseille, Frankreich; 01.09.1998 - 30.09.1998; in: "20th Symposium on Fusion Technology", (1998), S. 93 - 96.

  38. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, 1st International Conference Micro- and Nano-Technology, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "Viennano 05, 1st International Conference Micro- and Nano-Technology", ÖTG, Wien (2005), ISBN: 3-901657-17-7; S. 8.

  39. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, 1st International Conference Micro- and Nano-Technology, Vienna, Austria; 09.03.2005 - 11.03.2005; in: "Viennano 05, 1st International Conference Micro- and Nano-Technology", ÖTG, Wien (2005), ISBN: 3-901657-17-7; S. 8.

  40. Autor/innen: Zalite Ilmars, ARC; Zhilinska Natalja, ARC; A. Krumina, TU Riga; Grazyna Mozdzen, AAC

    Zalite Ilmars, Zhilinska Natalja, A. Krumina, G. Mozdzen:
    "Comparison of sintering process of commercial and nanopowders of Si3N4-6%Y203 - 3%Al203";
    Vortrag: Engineering Materials & Tribology - 2004, Riga, Latvia; 23.09.2004 - 24.09.2004; in: "Engineering Materials & Tribology - 2004 Tagungsband der XIII-th International Baltic Conference", (2004), -; S. 206 - 210.

  41. Autor/innen: Zhilinska Natalja, ARC; Zalite Ilmars, ARC; A. Krumina, TU Riga; Walter Constin, AMAT; Grazyna Mozdzen, AAC

    Zhilinska Natalja, Zalite Ilmars, A. Krumina, W. Constin, G. Mozdzen:
    "Sintern der Materialien auf der Basis unterschiedlicher Si3N4-Pulver";
    Vortrag: 14. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien; 02.07.2003 - 04.07.2003; in: "14. Symposium Verbundwerkstoffe", Wiley-VCH, Weinheim (2003), ISBN: 3-527-30762-1; S. 399 - 404.


Vorträge und Posterpräsentationen (ohne Tagungsband-Eintrag)


  1. Autor/innen: Lubos Baca, PTC; Z. Lencés, Slovak Academy of Sc; Sales Muriel, AAC; Nils Stelzer, PTC

    L. Baca, Z. Lencés, Sales Muriel, N. Stelzer:
    "Effect of boron addition on wear and mechanical properties of TiB2 ceramic prepared by sol-gel method";
    Vortrag: 11th Conference of European Ceramic Society, Verona; 2008.

  2. Autor/innen: Josef Brenner, ARC; Andreas Merstallinger, AAC; Markus Ungerank, ARC; Heimo Bieringer, ARC

    J. Brenner, A. Merstallinger, M. Ungerank, H. Bieringer:
    "TRIBOCHEMICAL INFLUENCE ON THE TRIBOLOGY OF POLYIMIDE AND POLYIMIDE COMPOUNDS IN GASEOUS ENVIRONMENTS AND VACUUM";
    Vortrag: ÖTG Symposium 2004, ARCS; 04.11.2004.

  3. Autor/innen: Josef Brenner, ARC; Markus Ungerank, ARC; E. Kubinger, Ensinger Sintimid; Heimo Bieringer, ARC; Andreas Merstallinger, AAC

    J. Brenner, M. Ungerank, E. Kubinger, H. Bieringer, A. Merstallinger:
    "Tribochemical Influence on the Tribology of Polyimide and Polyimide Compounds in Gaseous Environments and Vacuum";
    Vortrag: 7th Austrian Polymer Meeting,, Austria; 2005.

  4. Autor/in: Vincent Calard, AAC

    V. Calard:
    "Nano-Composites in ARC";
    Vortrag: Workshop Composite Technologie, Seibersdorf; 13.06.2008.

  5. Autor/innen: Vincent Calard, AAC; Brigitte Defoort, EADS Launch Vehicles; S. Langlois

    V. Calard, B. Defoort, S. Langlois:
    "Mechanical behaviours and fracture mechanisms of rigidizable composites for inflatable structures";
    Vortrag: 1st CEAS European Air & Space Congress and Deutscher Luft und Raumfahrtkongress 2007, Berlin, Germany; 10.09.2007 - 13.09.2007.

  6. Autor/innen: Vincent Calard, AAC; Ernst Semerad, AAC; Andreas Merstallinger, AAC

    V. Calard, E. Semerad, A. Merstallinger:
    "Aerospace and Space Materials Technology Testhouse - Introduction to effect of space environment to materials and related testing methods";
    Vortrag: TRIBOLOGY: Science and Application, Vienna; 01.04.2003 - 30.04.2003.

  7. Autor/innen: Brigitte Defoort, EADS Launch Vehicles; M. Mille; X. COQUERET; C. BERNASCONI; Vincent Calard, AAC; S. Langlois

    B. Defoort, M. Mille, X. COQUERET, C. BERNASCONI, V. Calard, S. Langlois:
    "Development and testing of rigidifiable composites for structural applications in space";
    Vortrag: Int. Conf. on Textile Composites and Inflatable Structures, Barcelona, Spain; 17.09.2007 - 19.09.2007.

  8. Autor/innen: Nicole Dörr, AC2T; A. Schneider, AC2T; Tamas Sebestyén, AC2T; Friedrich Franek, AC2T; Andreas Merstallinger, AAC; Wolfgang Pahl, GKN

    N. Dörr, A. Schneider, T. Sebestyén, F. Franek, A. Merstallinger, W. Pahl:
    "IONIC LIQUIDS IN POROUS METAL BEARINGS (FEASIBILITY STUDY)";
    Vortrag: ÖTG Symposium 2006, Steyr; 2006.

  9. Autor/innen: U. Fastner, ECHEM; Josef Wendrinsky, AAC; G. Fafilek; H. Kronberger; J.O. Besenhard; Gerhard Nauer, ECHEM

    U. Fastner, J. Wendrinsky, G. Fafilek, H. Kronberger, J.O. Besenhard, G. Nauer:
    "The Preparation of Nanocrystalline Dispersion Coatings";
    Vortrag: European Congress on Advanced Materials and Processes, Prague, Czech Republic; 05.09.2005 - 08.09.2005.

  10. Autor/innen: Markus Fink, AMAT; Andreas Merstallinger, AAC; Dietmar Uschan, AMAT; J. Eder, ALT; Christian Holzapfel, Schleifring; J. Rehder; Rene Seiler, ESTEC

    M. Fink, A. Merstallinger, U. Uschan, J. Eder, C. Holzapfel, J. Rehder, R. Seiler:
    ""High Temperature Rotary Joint"";
    Vortrag: Final Presentation Days, Noordwijk; 18.03.2008 - 20.03.2008.

  11. Autor/innen: Norica Godja, ECHEM; Christine Löcker, ECHEM; Nicolett Kiss, ECHEM; Andreas Schindel, AAC; Josef Wendrinsky, AAC; Gerhard Nauer, ECHEM

    N. Godja, C. Löcker, N. Kiss, A. Schindel, J. Wendrinsky, G. Nauer:
    "Pretreatment of Light Weight Metal Alloys";
    Poster: 59th Annual Meeting of the International Society of Electrochemistry, Sevilla, Spanien; 07.09.2008 - 12.09.2008.

  12. Autor/innen: Norica Godja, ECHEM; Christine Löcker, ECHEM; Nicolett Kiss, ECHEM; Andreas Schindel, AAC; Josef Wendrinsky, AAC; Gerhard Nauer, ECHEM

    N. Godja, C. Löcker, N. Kiss, A. Schindel, J. Wendrinsky, G. Nauer:
    "Spark Discharge Anodization as a Pretreatment Method of Corrosion-Protection, Bonding and Coating Processes";
    Poster: 59th Annual Meeting of the International Society of Electrochemistry, Sevilla, Spanien; 07.09.2008 - 12.09.2008.

  13. Autor/innen: Norica Godja, ECHEM; Josef Wendrinsky, AAC; Christine Löcker, ECHEM; Nicolett Kiss, ECHEM; Andreas Schindel, AAC; Gerhard Nauer, ECHEM

    N. Godja, J. Wendrinsky, C. Löcker, N. Kiss, A. Schindel, G. Nauer:
    "Spark Anodization as a Successful Method for Surface Treatments";
    Vortrag: 22nd International Conference on Surface Modification Technologies, Trollhätten, Schweden; 22.09.2008 - 24.09.2008.

  14. Autor/innen: Rudolf Gradinger, LKR; D. Horwatitsch, LKR; Elisabeth Berhuber, Böhler Udeholm; J Kneissl, ESTEC - MAS; Peter Uttenthaler, Ceratizit; Erwin Reiss, S & I; Franz Obermair, Profactor; Andreas Merstallinger, AAC

    R. Gradinger, D. Horwatitsch, E. Berhuber, J. Kneissl, P. Uttenthaler, E. Reiss, F. Obermair, A. Merstallinger:
    "Integrated optimization of titanium machining";
    Vortrag: Proceedings of the Light Metals Technology Conference 2007, *; 2007.

  15. Autor/innen: Peter Alexander Hahn, AMAT; Thomas Goss, AMAT [(keine)]; Alfred Karlovsky, W; Michael Scheerer, AAC; Anneliese Pönninger, AAC

    P. Hahn, T. Goss, A. Karlovsky, M. Scheerer, A. Pönninger:
    "MONITORING THE CRACK PROPAGATION IN FRACTURE TOUGHNESS SPECIMENS BY MEANS OF ACOUSTIC EMISSION ANALYSIS";
    Vortrag: 2nd European Workshop Strutural Health Monitoring, Munich/Germany; 07.07.2004 - 09.07.2004.

  16. Autor/innen: F. Haruvy Yaara, ARC; Huertas Olivares Inmaculada, AMAT [(keine)]; Volker Liedtke, AAC

    F. Haruvy Yaara, Huertas Olivares Inmaculada, V. Liedtke:
    "Novel Thermal Protection Systems via CTE-matched CMC-OPS tailoring, employing the fast-sol-gel resins";
    Vortrag: 5th European Workshop on Thermal Protection Systems and Hot Structures, Noordwijk; 17.05.2005 - 19.05.2005.

  17. Autor/innen: Dieter Horwatitsch, LKR; Andreas Merstallinger, AAC

    D. Horwatitsch, A. Merstallinger:
    "Prozessoptimierung stark reibungsbehafteter Formgebungsverfahren für Werkzeuge mittels Simulationsmethoden";
    Vortrag: Spritzgießwerkzeuge - Technologien & Trends für optisch hochwertige und funktionelle Kunststoffanteile, St. Pölten; 22.09.2011.

  18. Autor/innen: D. Horwatitsch, LKR; Grazyna Mozdzen, AAC; Andreas Merstallinger, AAC; Rudolf Gradinger, LKR; Ulf Noster, LKR; K Steinhoff, Kassel

    D. Horwatitsch, G. Mozdzen, A. Merstallinger, R. Gradinger, U. Noster, K. Steinhoff:
    "Ermittlung der Reibung zur Verwendung in einer FE-basierten Prozesssimulation eines Zerspannungsprozesses";
    Vortrag: ÖTG Symposium 2007, St. Pölten; 2007.

  19. Autor/innen: Huertas Olivares Inmaculada, AMAT [(keine)]; Volker Liedtke, AAC; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC; Ulrich Trabandt, Astrium GmbH; Handrick E. Karin, MAN Technologie AG

    Huertas Olivares Inmaculada, V. Liedtke, M. Langer, F. Haruvy Yaara, U. Trabandt, Handrick E Karin:
    "Thermo-mechanical Testing of Oxidation Protection System for Re-entry Applications";
    Vortrag: European Congress on Advanced Materials and Processes, Prague, Check Republic; 05.09.2005 - 08.09.2005.

  20. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, F. Haruvy Yaara:
    "Engineering-Scale fabrication and space-environment testing for Re-Entry C-SiC Ceramic Matrix Composites and Oxygen Protective Systems made by the Fast Sol-Gel";
    Vortrag: The 10th International Symposium on Materials in a Space Environment, Collioure (France); 19.06.2006 - 23.06.2006.

  21. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, F. Haruvy Yaara:
    "Manufacturing and Performance Testing of Sol/Gel based Oxidation Protection Systems for re-usable Space Vehicles";
    Vortrag: IX Conference & Exhibition of the European Ceramic Society- ECERS, Portoroc, Slovenia; 2005.

  22. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, F. Haruvy Yaara:
    "Sol-Gel based Carbon/Silicon carbide";
    Vortrag: IX Conference & Exhibition of the European Ceramic Society- ECERS, Portoroc, Slovenia; 2005.

  23. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, F. Haruvy Yaara:
    "Sol-Gel based Carbon/Silicon-Carbide Composites and Oxidation Protection Systems";
    Vortrag: European Conference on "Spacecraft Structures, Materials & Mechanical Testing", Noordwijk; 2005.

  24. Autor/innen: Volker Liedtke, AAC; Huertas Olivares Inmaculada, AMAT [(keine)]; Markus Langer, AMAT [(keine)]; Ulrich Trabandt, Astrium GmbH; Handrick E. Karin, MAN Technologie AG; F. Haruvy Yaara, ARC

    V. Liedtke, Huertas Olivares Inmaculada, M. Langer, U. Trabandt, Handrick E Karin, F. Haruvy Yaara:
    "Thermo-Mechanical Testing of Oxidation Protection System for Ceramic Matrix Composites";
    Vortrag: European Conference on "Spacecraft Structures, Materials & Mechanical Testing", Noordwijk; 2005.

  25. Autor/innen: R. Liska, University of Techno; S. Knaus, Institute of Chemica; Josef Wendrinsky, AAC

    R. Liska, S. Knaus, J. Wendrinsky:
    "Carbohydrate Modified Photoinitiators";
    Vortrag: Radcure Coatings and Inks, Harrogate (GB); 22.06.1998 - 23.06.1998.

  26. Autor/innen: R. Liska, University of Techno; S. Knaus, Institute of Chemica; Josef Wendrinsky, AAC

    R. Liska, S. Knaus, J. Wendrinsky:
    "Maleimid-functionalized Photoinitiators (Pls)";
    Vortrag: 3. Österreichische Polymertage, Graz; 09.09.1998 - 11.09.1998.

  27. Autor/innen: R. Liska, University of Techno; S. Knaus, Institute of Chemica; Josef Wendrinsky, AAC

    R. Liska, S. Knaus, J. Wendrinsky:
    "Synthesis and Properties of Heterocyclic Type I Photoinitiators";
    Vortrag: Ionizing Radiation and Polymers, Weinböhla (D); 19.09.1998 - 24.09.1998.

  28. Autor/in: Andreas Merstallinger, AAC

    A. Merstallinger:
    "Bestimmung der Reibung für die Umformsimulation";
    Vortrag: Umform-Tribologie, ARCS; 2006.

  29. Autor/in: Andreas Merstallinger, AAC

    A. Merstallinger:
    "Cold welding of contacts due to Static, Impact and Fretting";
    Vortrag: Space Tribology Course, Luzern; 2005.

  30. Autor/in: Andreas Merstallinger, AAC

    A. Merstallinger:
    "CONTACT ADHESION - COLD WELDING OF CONTACTS DUE TO STATIC IMPACT AND FRETTING";
    Vortrag: Invited lession in ESTL-Tribology course 2007, Liverpool; 2007.

  31. Autor/in: Andreas Merstallinger, AAC

    A. Merstallinger:
    "Ionic Liquids as new lubricants for space";
    Vortrag: Innovation Triangle Initiative (ITI) 2nd Final Presentations´ Day, ESTEC / NL; 10/2006.

  32. Autor/in: Andreas Merstallinger, AAC

    A. Merstallinger:
    "VACUUM TRIBOLOGY - COLD WELDING DUE TO FRETTING AND IMPACT UNDER HIGH VACUUM";
    Vortrag: TRIBOLOGY: Science and application, Vienna; 01.04.2003.

  33. Autor/innen: Andreas Merstallinger, AAC; Heimo Bieringer, ARC; Lionel Gaillard , ARC

    A. Merstallinger, H. Bieringer, L. Gaillard:
    "SELF LUBRICATING COMPOSITES FOR MEDIUM TEMPERATURES IN SPACE BASED ON POLYIMIDE SINTIMID";
    Vortrag: Tribology forum, ESTEC; 2005.

  34. Autor/innen: Andreas Merstallinger, AAC; Heimo Bieringer, ARC; E. Kubinger, Ensinger Sintimid; Lionel Gaillard , ARC; Josef Brenner, ARC; Grazyna Mozdzen, AAC

    A. Merstallinger, H. Bieringer, E. Kubinger, L. Gaillard , J. Brenner, G. Mozdzen:
    "SELF LUBRICATING COMPOSITES FOR MEDIUM TEMPERATURES IN SPACE BASED ON POLYIMIDE SINTIMID";
    Vortrag: 11th European Space Mechanisms and Tribology Symposium, Luzern; 2005.

  35. Autor/innen: Andreas Merstallinger, AAC; Markus Fink, AMAT; Erich Neubauer, PTC; J. Eder, ALT; Christian Holzapfel, Schleifring; Rene Seiler, ESTEC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, M. Fink, E. Neubauer, J. Eder, C. Holzapfel, R. Seiler, L. Gaillard , L. Pambaguian:
    "Highly Loaded Metal Matrix Composites For Low Friaction ApplicationsS";
    Vortrag: ÖTG Symposium 2008, Wr. Neustadt; 20.11.2008.

  36. Autor/innen: Andreas Merstallinger, AAC; Markus Fink, AMAT; Erich Neubauer, PTC; Josef Eder, Schleifring; Christian Holzapfel, Schleifring; Rene Seiler, ESTEC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, M. Fink, E. Neubauer, J. Eder, C. Holzapfel, R. Seiler, L. Gaillard , L. Pambaguian:
    "Self lubricating copper composites for tribological applications at medium";
    Vortrag: ESMATS 2007, Liverpool; 2007.

  37. Autor/innen: Andreas Merstallinger, AAC; Volker Liedtke, AAC; Josef Wendrinsky, AAC; Lubos Baca, PTC; U. Fastner, ECHEM; N. Doerr, ARC; Lionel Gaillard , ARC

    A. Merstallinger, V. Liedtke, J. Wendrinsky, L. Baca, U. Fastner, N. Doerr, L. Gaillard :
    "Recent developments in materials research and their possibilities for use in space applications: nano-particle based polymer composites and ionic liquids";
    Vortrag: ISMSE2006, Collioure; 19.06.2006 - 23.06.2006.

  38. Autor/innen: Andreas Merstallinger, AAC; Erich Neubauer, PTC; Vincent Calard, AAC

    A. Merstallinger, E. Neubauer, V. Calard:
    "SELF-LUBRICATING COPPER COMPOSITES FOR DRY FRICTION IN "ALL" ENVIRONMENTS";
    Vortrag: International Conference "Tribology of Alternative Fuels and Ecolubricants", Vienna; 29.05.2006 - 31.05.2006.

  39. Autor/innen: Andreas Merstallinger, AAC; Erich Neubauer, PTC; Vincent Calard, AAC

    A. Merstallinger, E. Neubauer, V. Calard:
    "SELF-LUBRICATING COPPER COMPOSITES FOR DRY FRICTION IN "ALL" ENVIRONMENTS";
    Vortrag: International Conference "Tribology of Alternative Fuels and Ecolubricants", Vienna; 29.05.2006 - 31.05.2006.

  40. Autor/innen: Andreas Merstallinger, AAC; Erich Neubauer, PTC; Vincent Calard, AAC; Lionel Gaillard , ARC; Laurent Pambaguian, ARC

    A. Merstallinger, E. Neubauer, V. Calard, L. Gaillard , L. Pambaguian:
    "Self-lubricating Copper Composites for Vacuum and Space";
    Vortrag: PM2004, Wien; 2004.

  41. Autor/innen: Andreas Merstallinger, AAC; Sales Muriel, AAC; Pierre Brunet, ARC; de Weerd Marie-Cécile, CNRS; Khare Varsha, CNRS; Jean-Marie Dubois , ARC; Gerhard Traxler, PROFA

    A. Merstallinger, Sales Muriel, P. Brunet, de Weerd Marie-Cécile, Khare Varsha, Dubois , G. Traxler:
    "Quasicrystals - New type of material to prevent Cold Welding";
    Vortrag: European Conference on Spacecraft Structures, Materials & Mechanical Testing 2005, Noorwijk; 10.05.2005 - 12.05.2005.

  42. Autor/innen: Andreas Merstallinger, AAC; Sales Muriel, AAC; B.D. Dunn, ALT; S. Shrestha, TWI Ltd, UK

    A. Merstallinger, Sales Muriel, B.D. Dunn, S. Shrestha:
    ""Combating the fretting wear and cold welding of aluminium alloys an spacecraft hardware using the plasma electrolytic oxidation (PEO) process"";
    Vortrag: 22nd int. Conf. on Surface Modification Technologies, Schweder; 21.09.2008 - 24.09.2008.

  43. Autor/innen: Andreas Merstallinger, AAC; Ernst Semerad, AAC; Barry Dunn, ARC

    A. Merstallinger, E. Semerad, B. Dunn:
    "Simulation of Cold Welding Effects in cyclic close contacts";
    Vortrag: Tribology Forum 2001, Noordwijk / Netherlands; 24.01.2001.

  44. Autor/innen: Andreas Merstallinger, AAC; Nils Stelzer, PTC; Rudolf Zauner, AMAT; Volker Liedtke, AAC; Leonhard Zeipper, AMAT [(keine)]

    A. Merstallinger, N. Stelzer, R. Zauner, V. Liedtke, L. Zeipper:
    "Innovative Verfahren zur Herstellung (zukünftiger) tribologischer Werkstoffe";
    Vortrag: ÖTG Symposium 2004, ARCS; 04.11.2004.

  45. Autor/innen: Andreas Merstallinger, AAC; Josef Wendrinsky, AAC; Lubos Baca, PTC; U. Fastner, ECHEM; N. Doerr, ARC; Lionel Gaillard , ARC

    A. Merstallinger, J. Wendrinsky, L. Baca, U. Fastner, N. Doerr, L. Gaillard :
    "Recent developments in materials research and their possibilities for use in space applications: nano-particle based composites and ionic liquids";
    Vortrag: ISME 2006, -; 01.06.2006 - 30.06.2006.

  46. Autor/innen: Andreas Merstallinger, AAC; Josef Wendrinsky, AAC; Lubos Baca, PTC; U. Fastner, ECHEM; N. Doerr, ARC; Lionel Gaillard , ARC

    A. Merstallinger, J. Wendrinsky, L. Baca, U. Fastner, N. Doerr, L. Gaillard :
    "Recent developments in materials research and their possibilities for use in space applications: nano-particle based composites and ionic liquids";
    Vortrag: ISME 2006, -; 01.06.2006 - 30.06.2006.

  47. Autor/innen: Isabel Montealegre, PTC; Erich Neubauer, PTC; Grazyna Mozdzen, AAC; J.M. Torralba

    I. Montealegre, E. Neubauer, G. Mozdzen, J. Torralba:
    "Microstructural and mechanical prperties of Titanium and Titanium Matrix Composites under the influence of raw powders and processing conditions";
    Poster: DGM Tagung, Lausenen; 14.07.2008 - 18.07.2008.

  48. Autor/innen: Grazyna Mozdzen, AAC; Andreas Merstallinger, AAC; Manfred Baumgärtner, FEM; Martin Funk, FEM; Anna Biedunkiewicz, TU Stettin; Walter Costin, AMAT

    G. Mozdzen, A. Merstallinger, M. Baumgärtner, M. Funk, A. Biedunkiewicz, W. Costin:
    "Effect of Nano-Particles on the structure and properties of NI(P) coatings electroplated at different conditions and subsequent heat treated";
    Vortrag: Metallographie Tagung Bremen, Bremen; 09/2007.

  49. Autor/innen: Grazyna Mozdzen, AAC; Andreas Merstallinger, AAC; Markus Fink, AMAT; Walter Costin, AMAT; Manfred Baumgärtner, FEM; Anna Biedunkiewicz, TU Stettin

    G. Mozdzen, A. Merstallinger, M. Fink, W. Costin, M. Baumgärtner, A. Biedunkiewicz:
    "Effect of Nano-Particles an the Structure and Propertiees of NiP Coating Electroplated at Different Conditions and Subsequent HEat Treated";
    Vortrag: 41 Internationale Metallographie Tagung, Bremen; 19.09.2007 - 21.09.2007.

  50. Autor/innen: Grazyna Mozdzen, AAC; Friedrich Rüdenauer, AMAT; Walter Costin, AMAT

    G. Mozdzen, F. Rüdenauer, W. Costin:
    "Imaging of Nano-Particles in Fibres and Thin Folis";
    Vortrag: FIB-Usermeeting Arcachon, France; 08.10.2008.

  51. Autor/innen: Grazyna Mozdzen, AAC; Christian Stocker, AMAT; K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT

    G. Mozdzen, Ch. Stocker, K. Spiradek-Hahn, M. Brabetz:
    "Erfassung der Ausscheidungszustände in einem hochwarmfesten 9%-CR Stahl mittels elektrochemischer Phasenisolierung";
    Vortrag: 11. Internationale Metallographie - Tagung, Leoben; 11.09.2002 - 13.09.2002.

  52. Autor/innen: Erich Neubauer, PTC; Grazyna Mozdzen, AAC; Isabel Montealegre, PTC; H. Danninger

    E. Neubauer, G. Mozdzen, I. Montealegre, H. Danninger:
    ""Estimation of an optimizing manufacturing of Titanium and Ti-6A1-4V composites via Hot Pressing in "Materials Science and Engineering"";
    Poster: DGM Tagung, Nürnberg; 01.09.2008 - 04.09.2008.

  53. Autor/innen: Cecilia Poletti, Vienna University of; Andreas Merstallinger, AAC; Thomas Schubert, ARC; Wilfried Marketz, Böhler Schmiedetechn; H.P. Degischer, ARC

    C. Poletti, A. Merstallinger, T. Schubert, W. Marketz, H.P. Degischer:
    "Wear and friction coefficient of Particle Reinforced Ti-Alloys";
    Vortrag: DGM Reibung und Verschleiß, TU Wien; 2004.

  54. Autor/innen: Sales Muriel, AAC; Andreas Merstallinger, AAC; Miha Cekada, Josef Stefan Institu; Dolinek Janez, Josef Stefan Inst.; A.I. Ustinov, E.O.Paton Electric W; S.S. Polishchuk, G.V. Kurdjumov Insti; Pierre Brunet, ARC; Jean-Marie Dubois , ARC

    Sales Muriel, A. Merstallinger, M. Cekada, Dolin&# ek Janez, A.I. Ustinov, S.S. Polishchuk, P. Brunet, Dubois:
    "COLD WELDING AND FRETTING TESTS ON QUASICRYSTAL COATINGS UNDER VACCUM";
    Vortrag: ISMSE 2006, Collioure; 19.06.2006 - 23.06.2006.

  55. Autor/innen: Sales Muriel, AAC; Andreas Merstallinger, AAC; Andreas Schindel, AAC; Josef Wendrinsky, AAC; Grazyna Mozdzen, AAC

    Sales Muriel, A. Merstallinger, A. Schindel, J. Wendrinsky, G. Mozdzen:
    "NANO-COMPOSITE COATINGS FOR TRIBOLOGICAL APPLICATIONS";
    Vortrag: 2007 Viennano: International Conference for Micro and Nanotechnology, Wien; 14.03.2007 - 16.03.2007.

  56. Autor/in: Michael Scheerer, AAC

    M. Scheerer:
    "Möglichkeiten der zerstörungsfreien Werkstoffprüfung";
    Vortrag: Industrie-Forum "Forschung & Entwicklung";, ARC; 24.10.2007.

  57. Autor/innen: Michael Scheerer, AAC; Klaus Brunnhofer, MAGNA STEYR; Adriana Sirbi, European Space Agenc

    M. Scheerer, K. Brunnhofer, A. Sirbi:
    "Optical Characterization of Slush Nitrogen";
    Vortrag: European space Cryogenic Workshop, Noordwijk; 01.06.2005 - 30.06.2005.

  58. Autor/innen: Michael Scheerer, AAC; Peter Alexander Hahn, AMAT; Anneliese Pönninger, AAC; Thomas Goss, AMAT [(keine)]; Alfred Karlovsky, W; Elisabeth Ladstätter, FACC

    M. Scheerer, P. Hahn, A. Pönninger, T. Goss, A. Karlovsky, E. Ladstätter:
    "Monitoring of Failure Development during Fatigue Loading of RTM laminates by Means of Acoustic Emission Analysis";
    Vortrag: 5th International Workshop Strutural Health Monitoring, Stanford; 14.09.2005 - 16.09.2005.

  59. Autor/innen: Michael Scheerer, AAC; Peter Alexander Hahn, AMAT; Anneliese Pönninger, AAC; Thomas Goss, AMAT [(keine)]; A. Reuthlinger

    M. Scheerer, P. Hahn, A. Pönninger, T. Goss, A. Reuthlinger:
    "International Workshop on Structural Heath Monitoring 2007";
    Vortrag: Simultaneous Monitoring of Strain and Temperature in Composite Materials by one single FBG Sensor, Stanford University; 11.09.2007 - 13.09.2007.

  60. Autor/in: Ernst Semerad, AAC

    E. Semerad:
    "The Seibersdorf Testhouse on Aerospace Materials Technology - a link between ESA and EU Programmes";
    Vortrag: Academic and Industiral Cooperation in Space Research, Vienna; 1998.

    Zusätzliche Informationen

  61. Autor/innen: S. Shrestha, TWI Ltd, UK; Andreas Merstallinger, AAC; D. Sickert, Technical University; Barry Dunn, ARC

    S. Shrestha, A. Merstallinger, D. Sickert, B. Dunn:
    "Some Preliminary Evaluations of Black Coating on Aluminium AA2219 Alloy Produced by Plasma Electrolytic (PEO) Process for Space Applications";
    Vortrag: -, -; 2003.

  62. Autor/innen: K. Spiradek-Hahn, ADG; Manfred Brabetz, AMAT; Grazyna Mozdzen, AAC; Jaroslav Wosik, ARC

    K. Spiradek-Hahn, M. Brabetz, G. Mozdzen, J. Wosik:
    "TEM/HRTEM Analysis of Precipitates in Ti-IF Steel Grades with defferent S content";
    Vortrag: Int.workshop, Linz; 04.03.2003.

  63. Autor/innen: Gerhard Traxler, PROFA; Christoph Steiger, AMAT; Michael Scheerer, AAC

    G. Traxler, Ch. Steiger, M. Scheerer:
    "Square pulse thermography system design considerations for detection of voids inside of the material with different properties and finite differences";
    Vortrag: Electronic Imaging 2005, San Jose (USA); 17.01.2005 - 20.01.2005.

    Zusätzliche Informationen

  64. Autor/in: Josef Wendrinsky, AAC

    J. Wendrinsky:
    "Chancen der Nano-Technologie";
    Vortrag: Workshop Composite Technologie, Seibersdorf; 13.06.2008.

  65. Autor/in: Josef Wendrinsky, AAC

    J. Wendrinsky:
    "ESH in außergewöhlichen Anwendungen";
    Vortrag: -, FH München; 10.06.2005.

  66. Autor/in: Josef Wendrinsky, AAC

    J. Wendrinsky:
    "Oberflächentechnik im Forschungszentrum: F&E / Prüfungen";
    Vortrag: INTERTOOL '98, ÖGO-Zentrum, Wien; 14.05.1998.

  67. Autor/in: Josef Wendrinsky, AAC

    J. Wendrinsky:
    "Radiation Processing - Beschleuingeranwendung in Technik, Umwelt und Medizin";
    Vortrag: Seminarreihe (Univ.Prof. Dipl.Ing. Dr. H. Aiginger): Strahlenphysikalische Anwendungen in Technik und Medizin, Atominstitut Wien; 26.01.2005.

  68. Autor/in: Josef Wendrinsky, AAC

    J. Wendrinsky:
    "Schadensfälle und deren Hintergründe";
    Vortrag: Fachtagung "Innovative Verbindungstechniken für Faserverbundwerkstoffe am Beispiel von Flugzeug- und Nutzfahrzeugbau", Kunststoff-Cluster, Wiener Neustadt; 09.03.2006.

  69. Autor/innen: Josef Wendrinsky, AAC; N. Godja; Andreas Schindel, AAC; Gerhard Nauer, ECHEM

    J. Wendrinsky, N. Godja, A. Schindel, G. Nauer:
    "Anodisation Processes of Aluminium Alloys";
    Vortrag: European Congress on Advanced Materials and Processes, Prague, Czech Republic; 05.09.2005 - 08.09.2005.

  70. Autor/innen: Josef Wendrinsky, AAC; Gerhard Nauer, ECHEM

    J. Wendrinsky, G. Nauer:
    "Herstellung nanostrukturierter Oberflächen mittels elektrochemischer Methoden";
    Vortrag: Nano Coating Days - NanoEurope 2005, St. Gallen, Schweiz; 13.09.2005 - 14.09.2005.

  71. Autor/innen: R. Wörgötter-Plunger, W; Ivica Smid, ARC; J. Linke, Forschungszentrum Jü; M. Röding; Michael Scheerer, AAC; J. Goebbels; B. Illerhaus; A. Kottar; B. Kriszt, LKR; M. Merola; G. Vieider; L. Plöchl

    R. Wörgötter-Plunger, I. Smid, J. Linke, M. Röding, M. Scheerer, J. Goebbels, B. Illerhaus, A. Kottar, B. Kriszt, M. Merola, G. Vieider, L. Plöchl:
    "Recent Advances in Non-Desctructive Inspection and Testing of Water Cooled, Carbon Armoured Components";
    Vortrag: 8th International Workshop on Carbon MaterialsJ, Jülich, Deutschland; 01.09.1998 - 30.09.1998.

  72. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, Vienna, Austria; 09.03.2005 - 11.03.2005.

  73. Autor/innen: Jaroslav Wosik, ARC; Manfred Brabetz, AMAT; Andreas Merstallinger, AAC; K. Spiradek-Hahn, ADG

    J. Wosik, M. Brabetz, A. Merstallinger, K. Spiradek-Hahn:
    "Nano-Surface Engineering for Implants";
    Vortrag: Viennano 05, Vienna, Austria; 09.03.2005 - 11.03.2005.

  74. Autor/innen: Zhilinska Natalja, ARC; Zalite Ilmars, ARC; A. Krumina, AMAT [(keine)]; Grazyna Mozdzen, AAC

    Zhilinska Natalja, Zalite Ilmars, A. Krumina, G. Mozdzen:
    "Sintering process of commercial and nanopowders of Si3N4-6Y2O3-3Al2O3";
    Vortrag: The 12th International Baltic Conference "Engineering Materials & Tribology" BALTMATTRIB-2003, Tallinn, Estonia; 02.10.2003 - 03.10.2003.


Dissertationen (eigene und begutachtete)


  1. Autor/in: Christopher Huber, ILSB-TUW
    Andere beteiligte Personen: Anneliese Pönninger, AAC; Andreas Merstallinger, AAC

    C. Huber:
    "Numerical Simulations of Metal Matrix Composites - Tribological Behavior and Finite Strain Response on Different Length Scales";
    Betreuer/in(nen), Begutachter/in(nen): A. Pönninger, A. Merstallinger; Institut für Leichtbau und Struktur-Biomechanik, 2008; Rigorosum: 02/2008.