Publication list for members of
Light Metals Technologies Ranshofen (LKR)
as authors or essentially involved persons
681 records (1998 - 2023)
The complete list of publications of the Center "Low-Emission Transport" is available from the publication database beginning with the publication year 2017. The database may but need not necessarily contain publications dated earlier than 2017.
Books and Book Editorships
-
F. Graber:
"Bestimmung der Schutzwirkung von Bekleidungstextilien bezüglich solarer UV-Strahlung bei verschiedenen Konditionierungen";
-,
Graz,
2006,
81 pages.
More information
-
H. Kaufmann, P. Uggowitzer:
"Vom Werkstoff zum Bauteilsystem";
LKR,
Ranshofen,
2000,
195 pages.
Publications in Scientific Journals
-
K. Anders et al.:
"Innovative Herstellmethoden für Bauteile eines Range Extender Kreiskolbenmotors";
Aluminiumpraxis - Sonderheft Österreich,
05
(2013),
5;
#
- ?.
-
A. Arnoldt, A. Schiffl, H. Höppel, J. Österreicher:
"Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082";
Materials Characterization,
191
(2022),
112129;
#.
More information
-
A. Arnoldt, L. Semmelrock, D. Soukup, J. Österreicher:
"Analysis of second phase particles in metals using deep learning: Segmentation of nanoscale dispersoids in 6xxx series aluminium alloys (Al-Mg-Si)";
Materials Characterization,
191
(2022),
112138;
#.
More information
-
A Betz, S. Gneiger, N. Ross, R. Gradinger:
"Thixotrusion: A Novel Process for Continuously Producing Mg Alloy Extrudate";
Light Metal Age,
April
(2016),
51
- 52.
-
S. Bozorgi:
"Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe)";
Aluminium Praxis (invited),
7-8 2015
(2015),
7-8;
14.
-
S. Bozorgi, K. Anders, I. Baumgartner:
"Microstructures and mechanical properties of Er modified AA7075 alloy";
International Journal of Cast Metals Research,
1
(2018),
#
- ?.
-
S. Bozorgi, M. Kumar, I. Baumgartner, R. Kretz, M. Just:
"Werstoffcharakterisierung und Schädigungsverhalten von A226-Gusslegierungen im Gusszustand";
BHM Berg- und Hüttenmännische Monatshefte,
02
(2015),
02.
-
S. Bozorgi, M. Silmbroth:
"Analysis of the Mechanical Properties of Secondary AlZnMg(Cu) Die-Cast Alloys";
International Journal of Metalcasting,
4
(2020),
#.
-
S. Bozorgi, S. Staggl, R. Kretz, P. Schumacher:
"Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe)";
BHM Berg- und Hüttenmännische Monatshefte,
XX
(2016),
XX.
-
S. Brötz, A. Horr:
"Framework for progressive adaption of FE mesh to simulate generative manufacturing processes";
Manufacturing Letters,
24
(2020),
52
- 55.
-
S. Brötz, S. Scheiblhofer:
"A framework for gradually appending a FE mesh to simulate generative manufacturing processes";
Manufacturing Letters,
xx
(2019),
#
- ?.
-
S. Brötz, S. Scheiblhofer:
"Prozesssimulation drahtbasierter additiver Fertigungsverfahren mit LS-DYNA";
NAFEMS,
50
(2019),
8 pages.
-
H. Buken, P. Sherstnev, E. Kozeschnik:
"A state parameter-based model for static recrystallization interacting with precipitation";
modelling and simulation in materials science and engineering,
1
(2016),
035006;
11 pages.
-
A. Elrefaei:
"Effectiveness of cold metal transfer process for welding 7075 aluminium alloys";
Science and Technology of Welding and Joining,
4
(2015),
4;
280
- 285.
-
A. Elrefaei, K. Anders, H. Kilian, W. Kühlein et al.:
"Friction Stir Welding of Extruded Powder Metallurgy Al Alloy";
Welding Journal,
December
(2014),
451
- 457.
-
A. Elrefaei, N. Ross:
"Microstructure and Mechanical Properties of cold Metal Transfer Welding Similar and Dissimilar Aluminium Alloys";
Acta Metallurgica,
1
(2015),
10 pages.
-
W. Fragner, N. Zhang, J. Wosik, R. Schneider, G. Nauer:
"Three-dimensional analysis of the growth of intermetallics phases between solid steel and molten aluminium";
Intermetallics,
v
(2009),
v.
-
S. Frank, S. Gneiger:
"Development of Cost-Effective Non-Flammable Magnesium Alloys";
Light Metal Age, San Francisco,
-
(2017),
08/2017;
6
- 8.
-
S. Frank, L. Kiessling, S. Gneiger, R. Gradinger, E. Neunteufl, C. Gayer, S. Leuders:
"Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts - Aktive Einsätze, eine Plug-and-Play-Lösung zur Verbesserung der mechanischen Eigenschaften und Verringerung der Porosität in LPDC-gefertigten Teilen";
BHM Berg- und Hüttenmännische Monatshefte,
168
(2022),
9;
#.
More information
-
S. Gneiger, A. Arnoldt, N. Papenberg:
"Investigations on a ternary Mg-Ca-Si wrought alloy extruded at moderate temperatures";
Materials Letters,
324
(2022),
132633;
#.
More information
-
S. Gneiger, J. Österreicher, A. Arnoldt, A. Birgmann, M. Fehlbier:
"Development of a High Strength Magnesium Alloy for Wire Arc Additive Manufacturing";
Metals,
10
(2020),
778;
#
- ?.
-
S. Gneiger, N. Papenberg, A. Arnoldt, C. Schlögl, M. Fehlbier:
"Investigations of High-Strength Mg-Al-Ca-Mn Alloys with a Broad Range of Ca+Al Contents";
MDPI Materials,
Materials 2021
(2021),
14(18);
#.
-
B. Götzinger, W. Karner, M. Hartmann, Z. Silvayeh, C. Sommitsch:
"Calculation of the Intermetallic Layer Thickness in Cold Metal Transfer Welding of Aluminum to Steel";
Materials,
12
(2018),
35.
-
T. Grabec, J. Österreicher, M. Hettich, I. Veres, M. Ryzy:
"Measurement of coherent surface acoustic wave attenuation in polycrystalline aluminum";
AIP Advances,
8
(2018),
125019;
#
- ?.
-
F. Grabner, J. Österreicher, B. Gruber, N. Papenberg, F. Gerstner, S. Kirnstötter, C. Schlögl:
"Cryogenic Forming of Al-Mg Alloy Sheet for Car Outer Body Applications";
Advanced Engineering Materials,
1
(2019),
1900089;
#
- ?.
-
R. Gradinger:
"Herausforderungen bei der industriellen Umsetzung des Legierungskonzeptes Scalmalloy für Flugzeuganwendungen";
BHM,
154
(2009),
9;
403.
-
R. Gradinger:
"Innovationen verbinden - DeltaSpot-Punktschweißen von hochfesten AMAG Topform-Blechen";
Alu Report,
1
(2013),
1.
-
R. Gradinger:
"On the influence of meso-inhomogeneities on the crush worthiness of metal foams";
Acta Metallurgical,
Vol. 47/1
(1999),
143
- 148.
-
R. Gradinger, H.P. Degischer:
"Experimental studies on different tube and filler arrangements of crush elements under axial compression";
International Journal of Solids and Structures,
Vol. ?
(1999),
10.
-
R. Gradinger, H.P. Degischer et al.:
"High Cycle Fatigue Properties of Aluminium Foams";
Materials Research Society,
nn
(1998).
-
R. Gradinger, . Pangerl, R. Prillhofer:
"Elektrisches Widerstandspunktschweißen von hochfesten AlZnMgCu-Blechen";
Lightweight Design,
07/2013
(2013),
7.
-
R. Gradinger, S. Ucsnik, A. Harrison et al.:
"Möglichkeiten zur Erhöhung der Verbindungsfestigkeit im Verbundguss durch Formschluss";
Schweiß- und Prüftechnik,
April
(2013),
4;
31
- 33.
-
G. Graf, P. Spoerk, P. Staron, A. Stark, F. Mendez Martin, H. Clemens, T. Klein:
"Quench rate sensitivity of age-hardenable Al-Zn-Mg-Cu alloys with respect to the Zn/Mg ratio: An in situ SAXS and HEXRD study";
Acta Materialia,
227
(2022),
117727;
#.
-
B. Gruber, F. Grabner, G. Falkinger, A. Schökel, F. Spieckermann, P. Uggowitzer, S. Pogatscher:
"Room temperature recovery of cryogenically deformed aluminium alloys";
Materials & Design,
193
(2020),
193;
#.
-
B. Gruber, F. Grabner, W. Fragner, A. Schökel, F. Spieckermann, P. Uggowitzer, S. Pogatscher:
"Ageing Behaviour of Al-Mg-Si Alloys After Cryogenic and Room Temperature Deformation";
MDPI Materials,
13
(2020),
554;
#
- ?.
-
B. Gruber, I. Weißensteiner, T. Kremmer, F. Grabner, G. Falkinger, A. Schökel, F. Spieckermann, R. Schäublin, P. Uggowitzer, S. Pogatscher:
"Mechanism of low temperature deformation in aluminium alloys";
Materials Science and Engineering A,
2020
(2020),
795;
#
- ?.
-
M. Gudeljevic:
"Wire Arc Additive Manufacturing - Herstellung neuer Legierungszusammensetzungen mittels Mehrdrahtsystem im Wire-Arc Additive Manufacturing Prozess";
ÖGS Fachzeitschrift "Schweiß- und Prüftechnik",
09-10/2020
(2020),
5;
147
- 150.
-
M. Gudeljevic:
"Wire Arc Additive Manufacturing-Herstellung neuer Legierungszusammensetzungen mittels Mehrdrahtsystem im Wire-arc Additive Manufacturing Prozess";
Schweisstechnik Soudure,
110
(2021),
32
- 34.
-
T. Hametner:
"Prototypenherstellung und Leichtmetalllegierungsentwicklung mit dem Niederdruckgießverfahren";
Gießerei-Rundschau,
7/8
(2016).
-
T. Hametner, S. Bozorgi, R. Kretz, K. Anders:
"Untersuchungen von Hochtemperatureigenschaften modifizierter AlSiCu-Gusslegierungen";
BHM Berg- und Hüttenmännische Monatshefte,
3
(2016),
3;
1
- 7.
-
T. Hamtner, S. Bozorgi, R. Kretz, K. Anders:
"Untersuchung von Hochtemperatureigenschaften modifizierter AlSiCu-Gusslegierungen";
Aluminium Praxis,
7-8
(2015),
7-8;
14.
-
A. Harrison, S. Frank, M. Hartmann, S. Hoque:
"Evaluation of the Energy Absorption Capability";
Spotlightmetal,
1
(2021),
#.
-
A. Harrison, S. Gneiger, S. Frank:
"Prozess- und Legierungsentwicklung für Magnesium-Druckguss";
Gießerei-Praxis,
03-04
(2021),
03-04;
8
- 11.
-
A. Harrison, R. Gradinger, B. Schmalisch, B. Weber, C. Zauner:
"Additives Fertigen mit der MPA-Technologie am Beispiel eines Druckgusswerkzeuges";
Gießerei-Praxis,
3
(2017),
86
- 92.
-
S. Hartl, R. Grössinger, R. Wöhrnschimmel, D. Horwatitsch, F. Spieckermann, G. Polt, M. Zehetbauer:
"Calculation of the classical losses of deformed Fe-(wt3%)Si under sinusoidal and triangular external field";
IEEE Transactions on Magnetics,
?
(2014),
?.
-
M. Hartmann, S. Brötz, A. Schiffl, J. Österreicher:
"Verbesserung der Crasheigenschaften von hochfesten Aluminium Sicherheitsbauteilen";
Lightweight Design,
1
(2018),
1;
30
- 34.
-
J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz, S. Pogatscher, P. Uggowitzer, J. Löffler:
""Processing and microstructure-property relations of high-strength low-alloy (HSLA) Mg-Zn-Ca alloys"";
Acta Materialia,
98, 1 October
(2015),
423
- 432.
-
A. Horr:
"Computational Evolving Technique for Casting Process of Alloys";
Mathematical Problems in Engineering,
1
(2019),
#
- ?.
-
A. Horr:
"Designing Safer Lightweight Road Infrastructure using Advanced Simulation Technology";
Transportation Research Procedia,
Vol. 14
(2016),
2458
- 2467.
-
A. Horr:
"Multi-resolution simulations of material processes for e-mobility applications";
TRA2018,
Wien
(2018),
10 pages.
-
A. Horr:
"On Analytical Concepts of Novel Multi-Resolution Casting Simulations";
IOP Conference Series: Materials Science and Engineering (invited),
529
(2019),
1;
#
- ?.
-
A. Horr:
"On New Ideas for Design of Road Infrastructure: Hybrid Fatigue Analyses";
Applied Sciences,
11
(2021),
#
- ?.
-
A. Horr:
"Optimization of Manufacturing Processes Using ML-Assisted Hybrid Technique";
Manufacturing Letters,
1
(2021),
1;
1 pages.
-
A. Horr:
"Thermal Energy Approach for Aluminium Process Simulations: Source-Capacity Technique";
Materials Today: Proceedings,
10
(2019),
2;
263
- 270.
-
A. Horr, M. Hartmann, J. Kronsteiner:
"Advanced Dynamic & Crash Simulation of Lightweight Profiles for Design of Roadside Infrastructure";
Transportation Research Procedia,
Vol. 14
(2016),
4180
- 4189.
-
A. Horr, J. Kronsteiner:
"Dynamic Simulations of Manufacturing Processes: Hybrid-Evolving Technique";
Metals,
1
(2021),
#.
-
A. Horr, J. Kronsteiner:
"On Numerical Simulation of Casting in New Foundries: Dynamic Process Simulations";
Metals,
10
(2020),
886;
#
- ?.
-
D. Horwatitsch et al.:
"Wear phenomena and simulation of hot shearing process";
Tribology International,
1
(2014).
-
S. Jäger, A. Ludwig:
"Efficient model for the prediction of dendritic grain growth using the lattice Boltzmann method coupled with a cellular automaton algorithm";
IOP Conference Series: Materials Science and Engineering,
529
(2019),
1;
#
- ?.
-
E. Kabliman, S. Bozorgi, J. Kronsteiner, A. Nikolas:
"Development of Al-Mg-Sc Thin Foils for Use in Fibre-Reinforced Metal Laminates";
Advanced Engineering Materials,
1
(2018),
800462
- ?.
-
E. Kabliman, S. Bozorgi, J. Kronsteiner, A. Nikolas:
"Development of Al-Mg-Sc Thin Foils for Use in Fibre-Reinforced Metal Laminates";
Advances in Engineering,
1
(2020),
#
- ?.
-
E. Kabliman, A. Kolody, M. Kommenda, G. Kronberger:
"Prediction of Stress-Strain Curves for Aluminium Alloys using Symbolic Regression";
AIP Conference Proceedings,
2113
(2019),
180009;
#.
-
E. Kabliman, A. Kolody, J. Kronsteiner, M. Kommenda, G. Kronberger:
"Application of Symbolic Regression for Constitutive Modeling of Plastic Deformation";
Applications in Engineering Science,
100052
(2021),
#.
-
H. Kaufmann:
"Neue Leichtmetall - Hochleistungswerkstoffe: Heute [über]morgen";
Werkzeug,
xx
(1998).
-
H. Kaufmann:
"Recent innovations in vertical squeeze casting";
Diecasting World,
(1999),
21
- 24.
-
H. Kaufmann, D. Limburg, P. Uggowitzer:
"Das New Rheocasting - Konzept und aktuelle Bauteileigenschaften";
Giesserei Praxis,
Vol. 7
(2000),
300
- 304.
-
H. Kaufmann, H. Wabusseg, P. Uggowitzer:
"Metallurgical and Processing Aspects of the NRC semi - solid Technology";
Aluminium,
Vol. 76
(2000),
69
- 75.
-
T. Klein, A. Arnoldt, R. Lahnsteiner, M. Schnall:
"Microstructure and mechanical properties of a structurally refined Al-Mg-Si alloy for wire-arc additive manufacturing";
Materials Science and Engineering A,
830
(2021),
830;
#.
-
T. Klein, A. Arnoldt, M. Schnall, S. Gneiger:
"Microstructure Formation and Mechanical Properties of a Wire-Arc Additive Manufactured Magnesium Alloy";
JOM,
3
(2021),
#
- ?.
-
T. Klein, G. Graf, P. Staron, A. Stark, H. Clemens, P. Spoerk:
"Microstructure evolution induced by the intrinsic heat treatment occurring during wire-arc additive manufacturing of an Al-Mg-Zn-Cu crossover alloy";
Materials Letters,
303
(2021),
130500;
#.
-
T. Klein, M. Gudeljevic:
"Investigation of material characteristics of intersections built by wire and arc additive manufacturing using locally varying deposition parameters";
International Journal of Advanced Manufacturing Technology,
116
(2021),
116;
#.
-
T. Klein, G. Kirov, S. Ucsnik:
"Self-Piercing Riveting of Medium- and High-Strength Al and Mg Alloy Sheets Enabled by in-Process Electric Resistance Heating";
Journal of Manufacturing Science and Engineering,
10
(2020),
#.
-
T. Klein, M. Paul, C. Simson, J. Niedermayer, B. Gludovatz:
"Phase decomposition upon heat-treatment of a eutectoid Ti-Fe alloy processed by dual-wire-arc additive manufacturing";
Materials Letters,
319
(2022),
132305;
#.
-
T. Klein, L. Reiter, M. Schnall:
"Wire-arc additive manufacturing of Al-Zn5.5-Mg-Cu (ML7075): Shifting paradigms of additive manufacture-ability";
Materials Letters,
313
(2022),
131841;
#.
-
T. Klein, M. Schnall:
"Control of macro-/microstructure and mechanical properties of a wire-arc additive manufactured aluminum alloy";
International Journal of Advanced Manufacturing Technology,
108
(2020),
235
- 244.
-
T. Klein, M. Schnall, B. Gomes, P. Warczok, D. Fleischhacker, P. Morais:
"Wire-arc additive manufacturing of a novel high-performance Al-Zn-Mg-Cu alloy: Processing, characterization and feasibility demonstration";
Additive Manufacturing,
101663
(2020),
#.
-
T. Klein, A. Wojcik, A. Arnoldt:
"A hypoeutectic Al-Ni-Mg in situ composite processed by wire-arc additive manufacturing: Phase evolution and mechanical behavior";
Materials & Design,
222
(2022),
111066;
#.
-
R. Kretz:
"Neue und bewährte Methoden - Überwachung der Schmelzequalität in Gießereien";
Gießerei Erfahrungsaustausch,
?
(2009).
-
R. Kretz:
"Spaceframe - Prototyp für das Stadtauto der Zukunft";
Seibersdorf Innovativ,
1
(2007),
9.
-
R. Kretz, I. Baumgartner:
"Magnesium Recycling per Destillation - solid oder überflüssig? Eine Machbarkeitsstudie";
BHM,
156
(2011),
7;
242
- 248.
-
R. Kretz, E. Wolfsgruber:
"Potential des Alulight Verfahrens zur Herstellung von dreidimensionalen Net Shape Schaumaluminiumbauteilen";
Materialwissenschaft und Werkstofftechnik,
Vol. 31
(2000),
No. 6;
400
- 402.
-
G. Kronberger, E. Kabliman, J. Kronsteiner, M. Kommenda:
"Extending a Physics-Based Constitutive Model using Genetic Programming";
Applications in Engineering Science,
9
(2022),
9;
#.
-
M. Kumar, N. Ross:
"Influence of temper on the performance of a high-strength Al-Zn-Mg alloy sheet in the warm forming processing chain";
Journal of Materials Processing Technology,
231
(2016),
0924-0136;
10 pages.
-
M. Kumar, N. Ross:
"Investigations on the hot stamping of AW-7921-T4 alloy sheet";
Advances in Materials Science and Engineering,
10
(2016).
-
M. Kumar, N. Ross:
"Warm forming and paint bake response of AW-7xxx sheet in various";
Key Engineering Materials,
Vols 651-653
(2015),
47
- 52.
-
M. Kumar, N. Sotirov, C. Chimani:
"Investigations on warm forming of AW-7020-T6 alloy sheet";
Journal of Materials Processing Technology,
1
(2014).
-
D. Lehmhus, A. von Hehl, R. Gradinger:
"Taking a downward turn on the weight spiral - lightweight materials in transport applications";
Materials & Design,
Volume 66, Part B
(2015),
5 pages.
-
D. Ma:
"Elastic properties of alpha-phase in engineering aluminium alloys: an ab-initio study";
Journal of Applied Physics,
124
(2018),
#
- ?.
-
A. Mazahery, M. Shabani:
"Modification mechanism and microstructural characteristics of eutectic Si in casting Al-Si alloys: A review on experimental and numerical studies";
JOM,
May 2014
(2014),
5.
-
A. Mazahery, M. Shabani, A. Elrefaei:
"Searching for the superior solution to the population-based optimization problem: Processing of the wear resistant commercial AA6061 AMCs";
International Journal of Damage Mechanics,
04
(2014),
4;
18 pages.
-
C. Melzer, C. Sommitsch, P. Sherstnev:
"Prediction of Precipitation kinetics during homogenization and microstructure evolution duríng and after hot rolling of AA5083";
International Journal of Mechanical Sciences,
(54)
(2011),
(1);
(12)
- (19).
-
B. Milkereit, M. Österreich, P. Schuster, G. Kirov, E. Mukeli, O. Kessler:
"Dissolution and Precipitation Behavior for Hot Forming of 7021 and 7075 Aluminium Alloys";
Metals,
Metals
(2018),
8/531;
#
- ?.
-
P. Morais, B. Gomes, P. Santos, M. Gomes, R. Gradinger, M. Schnall, S. Bozorgi, T. Klein, D. Fleischhacker, P. Warczok, A. Falahati, E. Kozeschnik:
"Characterisation of a high-performance Al-Zn-Mg-Cu alloy designed for wire arc additive manufacturing";
Materials,
13
(2020),
1610;
#
- ?.
-
C. Mühlstätter:
"CFD zur Abbildung von Effekten in der Leichtmetallherstellung";
Proceedings 13. Cadfem ANSYS Simulation Conference Austria,
Proceedings 13. Cadfem ANSYS Simulation Conference Austria
(2018),
34 pages.
-
C. Mühlstätter:
"Characterisation and application of a damage modelling approach for cast Aluminium alloys";
Proceedings Automotive CAE Grand Challenge 2018,
Proceedings Automotive CAE Grand Challenge 2018
(2018),
29 pages.
-
C. Mühlstätter, G. Scheuerer:
"Erweiterter Wandsiedeansatz zur Abbildung des Leidenfrost-Effektes an Gussoberflächen";
CADFEM Journal,
1
(2019),
1;
4
- 5.
-
J. Österreicher:
"Combined cyclic deformation and artificial ageing of an Al-Mg-Si alloy";
Materials Letters: X,
10
(2021),
10;
#.
-
J. Österreicher:
"Halbwarmumformung der "Siebentausender"";
Konstruktion,
74
(2022),
9;
52
- 53.
More information
-
J. Österreicher, F. Grabner, A. Schiffl, S. Schwarz, G. Bourret:
"Information Depth in Backscattered Electron Microscopy of Nanoparticles Within a Solid Matrix";
Materials Characterization,
138
(2018),
145
- 153.
-
J. Österreicher, F. Grabner, M. Tunes, D. Coradini, S. Pogatscher, C. Schlögl:
"Two step-ageing of 7xxx series alloys with an intermediate warm-forming step";
Journal of Materials Research and Technology,
12
(2021),
12;
1508
- 1515.
-
J. Österreicher, G. Kirov, S. Gerstl, E. Mukeli, F. Grabner, M. Kumar:
"Stabilization of 7xxx aluminium alloys";
Journal of Alloys and Compounds,
740 (2018)
(2018),
167
- 173.
-
J. Österreicher, M. Kumar, A. Schiffl, S. Schwarz, G. Bourret:
"Secondary precipitation during homogenization of Al-Mg-Si alloys: influence on high temperature flow stress";
Materials Science and Engineering A,
-
(2017),
687;
175
- 180.
-
J. Österreicher, M. Kumar, A. Schiffl, S. Schwarz, D. Hillebrand, G. Bourret:
"Sample preparation methods for scanning electron microscopy of homogenized Al-Mg-Si billets: A comparative study";
Materials Characterization,
6
(2016).
-
J. Österreicher, N. Papenberg, M. Kumar, M. Duancheng, S. Schwarz, C. Schlögl:
"Quantitative prediction of the mechanical properties of precipitation hardened alloys with a special application to Al-Mg-Si";
Materials Science and Engineering A,
703
(2017),
380
- 385.
More information
-
J. Österreicher, C. Simson, A. Großalber, S. Frank, S. Gneiger:
"Spatial lithium quantification by backscattered electron microscopy coupled with energy-dispersive X-ray spectroscopy";
Scripta Materialia,
194
(2021),
194;
#.
-
J. Österreicher, M. Tunes, F. Grabner, A. Arnoldt, T. Kremmer, S. Pogatscher, C. Schlögl:
"Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet";
Materials & Design,
193
(2020),
193;
108837.
-
D. Pahr, S. Ucsnik:
"Experimental and Numerical studies of a Hybrid Metal-Composite Joint";
Composites Part A: Applied Science and Manufacturing,
09
(2010).
-
N. Papenberg, A. Arnoldt, B. Trink, P. Uggowitzer:
"Closed die forging of a Mg-Al-Ca-Mn-Zn lean alloy";
Materials Science and Engineering A,
857
(2022),
144079;
#.
-
N. Papenberg, S. Bozorgi, R. Pippan:
"Analytische Betrachtung der Bruchmechanismen in AlSiCu-Gusslegierungen";
Materialwissenschaft und Werkstofftechnik,
49
(2018),
934
- 941.
-
N. Papenberg, S. Gneiger:
"Closed Die Forging of Mg-Al-Zn-Ca-Y Alloys";
Materials Science Forum,
Schweiz
(2018),
ISSN: 0255-5476;
28
- 33.
-
N. Papenberg, S. Gneiger, P. Uggowitzer, S. Pogatscher:
"Lean Wrought Magnesium Alloys";
MDPI Materials,
14
(2021),
4282;
1
- 30.
-
N. Papenberg, S. Gneiger, I. Weißensteiner, P. Uggowitzer, S. Pogatscher:
"Mg-Alloys for Forging Applications-A Review";
MDPI Materials,
13
(2020),
985;
#.
-
N. Papenberg, T. Hatzenbichler, F. Grabner, P. Uggowitzer, S. Pogatscher:
"Forging of an age‑hardenable Mg-Al-Ca-Mn-Zn alloy on industrial scale";
SN Applied Sciences,
5
(2023),
14;
11.
More information
-
M. Paul, T. Klein, C. Simson, J. Niedermayer, J. Kruzic, B. Gludovatz:
"Strength and fracture resistance of in-situ alloyed compositionally-graded Al-Si processed by dual-wire-arc additive manufacturing";
Additive Manufacturing,
60
(2022),
103291;
#.
More information
-
S. Pogatscher, H. Antrekowitsch, H. Leitner, D. Pöschmann, Z. Zhang, P. Uggowitzer:
"Influence of Interrupted Quenching on Artificial Aging of Al-Mg-Si Alloys";
Acta Materialia,
0
(2012).
-
C. Reichl, R. Schneider, W. Hohenauer, F. Grabner, R. Grant:
"A numerical simulation of thermodynamic processes for cryogenic metal forming of aluminum sheets and comparison with experimental results";
Applied Thermal Engineering,
113
(2017),
1228
- 1241.
-
F. Riemelmoser, W. Kühlein, H. Kilian, M. Kettner, A. Hänzi, P. Uggowitzer:
"Micro-alloyed wrought magnesium for room-temperature forming";
Advanced Engineering Materials,
1
(2009),
1;
1
- 2.
-
M. Röding, R. Duwe, W. Kühlein, J. Linke, M. Scheerer, I. Smid, B. Wiechers:
"Testing of Actively Cooled High Heat Flux Mock-Ups";
Journal of Nuclear Materials,
Vol.258-263
(1998).
-
F. Roters, M. Diehl, P. Shanthraj, P. Eisenlohr, C. Reuber, S. Wong, T. Maiti, A. Ebrahimi, T. Hochrainer, H. Fabritius, S. Nikolov, M. Friak, N. Fujita, N. Grilli, K. Janssens, N. Jia, P. Kok, D. Ma, D. Raabe, F. Meier, M. Sticker, D. Weygand:
"DAMASK - The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale";
Computational Materials Science,
1
(2019),
158;
420
- 478.
-
M. Saeedipour, S. Pirker, S. Bozorgi, S. Schneiderbauer:
"An Eulerian-Lagrangian hybrid model for the coarse-grid simulation of turbulent liquid jet breakup";
International Journal of Multiphase Flow,
10.1007
(2016),
9 pages.
-
M. Safyari, G. Mori, S. Ucsnik, M. Moshtaghi:
"Mechanisms of hydrogen absorption, trapping and release during galvanostatic anodization of high-strength aluminum alloys";
Journal of Materials Research and Technology,
1
(2022),
#.
More information
-
N. Sarantinos, S. Tsantzalis, S. Ucsnik, V. Kostopoulos:
"Review of through-the-thickness reinforced composites in joints";
Composite Structures,
229
(2019),
111404;
#
- ?.
-
R. Schäublin, L. Hauser, S. Gerstl, C. Simson, P. Uggowitzer, J. Löffler:
"Rational design of a lean magnesium-based alloy with high age-hardening response";
Acta Materialia,
158
(2018),
214
- 229.
-
A. Schiffl:
"Direct Chill Casting of Magnesium using Hot-Top-Technology for Improved Casting Quality";
Magnesium 2009,
3
(2009).
More information
-
A. Schiffl:
"Kornfeinung von Magnesium, Teil 1 (Literaturzusammenfassung)";
Giesserei Praxis,
97
(2010),
03;
20
- 24.
-
A. Schiffl, M. Easton:
"Einfluss von SiC-Partikel und Gießgeschwindigkeit auf die Korngröße einer im Strangguss vergossenen Magnesiumlegierung AZ31";
Berg- und Hüttenmännische Monatshefte,
Vol. 154
(2009),
1.
More information
-
A. Schiffl, M. Easton:
"Einfluss von SiC-Partikel und Gießgeschwindigkeit auf die Korngröße einer im Strangguss vergossenen Magnesiumlegierung AZ31";
BHM,
-
(2009),
Vol. 154;
#.
-
A. Schiffl, M. Easton:
"Influence of SiC particles On the Grain Refinement of an Mg-Alloy";
Materials Science Forum,
Light Metals Techology 2009
(2009),
618-619;
445
- 448.
More information
-
A. Schiffl, D. Gunde:
"Grain refinement of Magnesium alloys with infiltrated SiC particles";
Materials Science and Engineering A,
1
(2009),
1;
1
- 2.
-
A. Schiffl, G. Kirov:
"Kornfeinung von Mg-Al-Legierungen mit SiC-Partikel";
Gießerei-Rundschau 56 (2009),
Heft 3/4
(2009),
44
- 49.
More information
-
A. Schiffl, G. Kirov:
"Kornfeinung von Mg-Al-Legierungen mit SiC-Partikeln";
Gießerei,
04
(2010),
20
- 24.
-
A. Schiffl, K. Renger, R. Simon, W. Kättlitz:
"Kornfeinung der Al-Mg-Legierung AZ91 mit Nucleant 5000";
Gießerei-Rundschau 56 (2009),
3/4 2009
(2009),
44
- 49.
-
A. Schiffl, K. Renger, R. Simon, W. Kättlitz:
"Kornfeinung der Al-Mg-Legierung AZ91 mit Nucleant 5000";
Gießerei-Rundschau,
-
(2009),
3/4;
44
- 49.
-
A. Schiffl, I. Schiffl, M. Hartmann, S. Brötz, J. Österreicher, W. Kühlein:
"Analysis of Impact Factors on Crash Performance of High Strength 6082 Alloys Consider Extrudability and Small Modifications of the Profile Geometry";
Materials Today: Proceedings,
10
(2019),
2;
193
- 200.
-
A. Schiffl, P. Uggowitzer, P. Gunde:
"Influence of Yttrium Additions on the Hot Tearing Susceptibility of Magnesium-Zinc Alloys";
Materials Science and Engineering A,
26
(2010),
26;
7074
- 7079.
-
D. Schloffer, S. Bozorgi, C. Lenhardt, B. Gollas:
"Manufacturing and characterization of Magnesium alloy foils for use ans anode materials in rechargeable magnesium ion batteries";
Journal of Power Sources,
367
(2017),
138
- 144.
-
R. Schneider, R. Grant, N. Sotirov, G. Falkinger, F. Grabner, C. Reichl, M. Scheerer, B. Heine, Z. Zouaoui:
"Constitutive flow curve approximation of commercial aluminium alloys at low temperatures";
Materials & Design,
Volume 88
(2015),
659
- 666.
-
R. Schneider, G. R. J., J. Schlosser, W. Rimkus, K. Radlmayr, F. Grabner, C. Maier:
"An Investigation of the Deep Drawing Behavior of Automotive Aluminum Alloys at Very Low Temperatures";
Metallurgical and Materials Transactions A,
12
(2019),
#.
-
P. Schuster, J. Österreicher, G. Kirov, C. Sommitsch, O. Kessler, E. Mukeli:
"Characterisation and Comparison of Process Chains for Producing Automotive Structural Parts from 7xxx Aluminium Sheets";
Metals,
9
(2019),
#
- ?.
-
M. Shabani, M. Shamsipour, A. Mazahery, Z. Pahlevani:
"Performance of ANFIS Coupled with PSO in Manufacturing Superior Wear Resistant Aluminum Matrix Nano Composites";
Transactions of the Indian Institute of Metals,
71
(2017),
9;
2095
- 2103.
-
M. Shaloo, M. Schnall, T. Klein, N. Huber, B. Reitinger:
"A Review of Non-Destructive Testing (NDT) Techniques for Defect Detection: Application to Fusion Welding and Future Wire Arc Additive Manufacturing Processes";
Materials,
15
(2022),
3697;
#.
-
P. Sherstnev:
"Prediction of precipitation kinetics during homogenisation and microstructure evolution during and after hot rolling of AA5083";
International Journal of Mechanical Sciences,
(1)
(2012),
(1);
12.
-
M. Silmbroth, N. Enzinger, C. Schneider-Bröskamp, A. Arnoldt, T. Klein:
"Characterisation of structural modifications on cold-formed AA2024 substrates by wire arc additive manufacturing";
Science and Technology of Welding and Joining,
1
(2022),
1;
#.
More information
-
Z. Silvayeh, J. Domitner, C. Sommitsch, M. Hartmann, W. Karner, B. Götzinger:
"Mechanical properties and fracture modes of thin butt-joined aluminum-steel blanks for automotive applications";
Journal of Manufacturing Processes,
59
(2020),
59;
456
- 467.
-
P. Simon, N. Sotirov, T. Waltenberger, D. Uffelmann:
"Verbessertes Umformverhalten von höchstfesten 7xxx-Aluminiumblechen durch Halbwarmumformen";
HTM - Journal of Heat Treatment and Materials,
1
(2010).
-
N. Sotirov et al.:
"Tiefe Temperaturen verbessern Umformeigenschaften von Aluminiumblechen";
WOMag,
02
(2014),
2;
8
- 9.
-
N. Sotirov, G. Falkinger, F. Grabner, G. Schmid, R. Schneider, R. Grant, R. Kelsch, M. Scheerer, C. Reichl, H. Sehrschön, M. Loipetsberger:
"Improved Formability of AA5182 Aluminium Alloy Sheet at Cryogenic Temperatures";
Materials Today: Proceedings,
Volume 2, Supplement 1
(2015),
113
- 118.
-
S. Stelzer, S. Ucsnik et al.:
"composite-composite joining with through the thickness reinforcments for enhanced damage tolerance";
Materials Science Forum,
825-826
(2015),
825-826;
8 pages.
-
S. Ucsnik:
"Experimental Investigation of a novel hybrid Metal-Composite Joining Technology";
Composites Part A: Applied Science and Manufacturing,
1
(2009),
1;
1
- 2.
-
S. Ucsnik et al.:
"Mischbau Fügetechnik für Metall-CFK-Lasteinleitungen";
Lightweight Design,
03/3013
(2013),
3;
#
- ?.
-
S. Ucsnik, G. Kirov:
"New possibility for the connection of metal sheets and fibre reinforced plastics";
Materials Science Forum,
690
(2011),
465
- 468.
More information
-
S. Ucsnik, M. Scheerer, S. Zaremba, D. Pahr:
"Experimental Investigation of a novel hybrid Metal-Composite Joining Technology";
Composites Part A: Applied Science and Manufacturing,
1
(2009),
1;
1
- 2.
-
L. Usatequi, T. Klein, M. Nó, S. Mayer, H. Clemens, J. San Juan:
"High-temperature phenomena in an advanced intermetallic nano-lamellar γ-TiAl-based alloy. Part I: Internal friction and atomic relaxation processes";
Acta Materialia,
200
(2020),
442
- 454.
-
J. Voyer:
"Flexible and Conducting Metal-Fabric Composites using the Flame Spray Process for the Produciton of Li-Ions Batteries";
Thermal Spray Technology,
Special Issue of Journal of Thermal Spray on Coatings for Energy Applications
(2012),
1.
-
J. Voyer:
"Heat Treatment Effects on the Properties of Wear-Resistant Amorphous Iron-Based Flame-Sprayed Coatings";
accepted for publication in Journal of Thermal Spray Technology
(2011).
More information
-
J. Voyer:
"Wear Resistant Amorphous Iron-Based Flame Sprayed Coatings";
Journal of Thermal Spray Technology,
v
(2009),
1;
1
- 2.
-
H. Wabusseg, H. Kaufmann, P. Uggowitzer:
"Struktur und Eigenschaften von New Rheocasting-Bauteilen";
Giesserei Praxis,
Vol. 3
(2000),
39
- 43.
-
D. Wang, M. Diehl, C. Liu, J. Mianroodi, F. Hanb, D. Ma, P. Kok, F. Roters, P. Shanthraj:
"Solving material mechanics and multiphysics problems of metals with complex microstructures using DAMASK";
Advanced Engineering Materials,
1
(2019),
1;
#.
-
G. Watzl, C. Grünsteidl, A. Arnoldt, J. Nietsch, J. Österreicher:
"In situ laser-ultrasonic monitoring of elastic parameters during natural aging in an Al-Zn-Mg-Cu alloy (AA7075) sheet";
Materialia,
1
(2022),
101600;
#.
-
M. Weber, F. Graber, K. Schulmeister, H. Brusl, H. Hann, P. Kindl, P. Knuschke:
"Solar UVR exposure of outdoor workers (tinsmiths) in Austria";
The Royal Society of New Zealand Miscellaneous Series,
68
(2006),
99
- 100.
More information
Contributions to Books
-
H.P. Degischer, P. Schulz, Ch. Hausmann, O. Beffort, V. Polasek, L. Ristow:
"Manufactorinbg of magnesium structures selectively reinforced by MMC inserts";
in: "In: Magnesium Alloys and their Applications",
nn,
nn,
1998.
-
J. Hofstetter, I. Baumgartner, H. Kilian, J. Reiter, S. Rüedi, B. Mingler, S. Pogatscher, J. Löffler, P. Uggowitzer:
"Hochfeste niedriglegierte (HSLA) Magnesiumlegierungen";
in: "Leichtmetalle-Prozesse-Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte",
issued by: C.M. Chimani, A. Kraly, P.J. Uggowitzer;
LKR,
Ranshofen,
2014,
ISBN: 978-3-902092-08-3,
29
- 36.
-
H. Kaufmann, P. Uggowitzer:
"New Rheocasting (NRC)- Verfahren von Magnesium - Legierungen";
Aluminium Verlag Düsseldorf,
Düsseldorf,
2000,
525
- 533.
-
F. Pravdic, K. Helmut, M. Brandecker, C. Wögerer, G. Traxler:
"Magnesium - Science, Technology and Applications";
Trans Tech Publications ltd,
Switzerland,
2005,
ISBN: 0-87849-968-7,
349
- 355.
-
A. Schiffl:
"Untersuchungen zur Kornfeinung von Mg-Al-Legierungen mit SiC-Partikeln";
in: "Untersuchungen zur Kornfeinung von Mg-Al-Legierungen mit SiC-Partikeln",
issued by: Prof. Dr.-Ing. A. Bührig-Polaczek;
Shaker Verlag,
Aachen,
2010,
ISBN: 978-3-8322-8938-6,
1
- 135.
Contributions to Proceedings
-
C. Angermeier, A. Harrison, R. Kretz:
"Low pressure die casting of magnesium alloy";
in: "Proceedings of the 10th international conference on magnesium alloys and their applications",
C. Angermeier (ed.);
issued by: Korean Institute of Metals and Materials;
Korean Institute of Metals and Materials,
Jeju,
2015,
8 pages.
-
S. Bozorgi, K. Anders:
"Mechanical Properties of high copper containing Al-Cu-Si Cast alloys at elevated temperature";
in: "ICAA16",
1;
Metallurgy and Materials Society of CIM,
Canada,
2018,
ISBN: 978-1-926872-41-4,
#
- ?.
-
S. Brötz, S. Scheiblhofer:
"Methodenentwicklung zur Prozesssimulation drahtbasierter Fertigungsverfahren";
in: "Conference Proceedings, NAFEMS 18 Dach Conference",
NAFEMS 18 Dach Conference;
NAFEMS,
Grafing b.M.,
2018,
ISBN: 978-1-910643-14-3,
101
- 104.
-
J. Domitner, R. Buzolin, S. Patil, P. Auer, N. Papenberg, E. Kabliman, Z. Silvayeh, A. Drexler, F. Grabner:
"Viscoplastic Self-Consistent (VPSC) Modeling for Predicting the Deformation Behavior of Commercial EN AW-7075-T651 Aluminum Alloy";
in: "Achievements and Trends in Material",
926;
issued by: Key Engineering Materials;
Trans Tech Publications Ltd.,
2022,
ISSN: 1662-9795,
2109
- 2118.
More information
-
A. Horr:
"Coupled Thermal-Mechanical Simulation for Continuous Casting of Lightweight Alloys";
in: "LightMat Conference 2017",
LightMat Conference 2017,
Bremen,
2017.
-
A. Horr:
"Energy-efficient lightweight material processes for e-mobility applications";
in: "European Aluminium Conference 2017",
European Aluminium Conference 2017,
Düsseldorf,
2017,
#
- ?.
-
D. Horwatitsch, R. Gradinger, A. Merstallinger:
"Determination of Friction in Bulk Metal Forming Using Ring Compression Test";
in: "Proceedings: Junior EuroMAT 2006",
Eigenverlag,
2006.
-
T. Klein, A. Birgmann, M. Schnall:
"In situ alloying of aluminium-based alloys by (multi-) wire-arc additive manufacturing";
in: "Matec web of conferences",
issued by: edp sciences, Les Ulis Cedex A, France;
edp sciences,
Les Ulis Cedex A,
2019,
ISSN: 2261-236x,
#.
-
T. Klein, M. Schnall:
"Improvement of microstructural homogeneity and mechanical properties during wire-arc additive manufacturing of an aluminium alloys using cold metal transfer";
in: "EAC Congresses 2019",
issued by: EAC;
EAC,
Gothenburg,
2019,
#
- ?.
-
J. Kronsteiner, E. Kabliman:
"SProC - Smart Process Control toolkit for semi-finished products manufacturing";
in: "Proceedings of the 16th International Conference on Aluminium Alloys",
The Canadian Institute of Mining, Metallurgy and Petroleum,
Montreal, CA,
2018,
ISBN: 978-1-926872-41-4.
-
J. Kronsteiner, E. Kabliman:
"Zoning method for efficient material properties calculation";
in: "Buches: Proceedings of the 15th LS-DYNA® International Conference & Users Meeting",
Livermore Software Technology Corporation,
Livermore, CA 94551,
2018,
ISBN: 978-0-9778540-2-8,
#
- ?.
-
J. Kronsteiner, E. Kabliman, P. Klimek:
"Microstructure Based Procedure for Process Parameter Control in Rolling of Aluminium Thin Foils";
in: "AIP (American Institute of Physics) Conference Proceedings",
1960;
issued by: AIP Publishing;
AIP,
Melville, NY 11747,
2018,
ISBN: 978-0-7354-1663-5,
40012
- ?.
-
C. Mühlstätter:
"A Stochastic Approach for Damage Modelling of Cast Alloys";
in: "SIMULTECH 2018",
issued by: Science and Technology Publications, Lda;
Science and Technology Publications, Lda,
2900-595 Setúbal, Portugal.,
2018,
ISBN: 978-989-758-323-0,
Paper ID 1,
5 pages.
-
C. Schlögl, D. Horwatitsch, J. Zajicek, H. Koller, R. Gradinger:
"Transportlogistikkonzept für die sortenreine Trennung von Sekundärrohstoffen";
in: "XXXIX. Verforumgskundliches Kolloquium",
1;
issued by: Lehrstuhl für Umformtechnik;
Montanuniversität Leoben,
Leoben,
2020,
ISBN: 978-3-902078-26-1,
95
- 100.
-
M. Schnall, S. Bozorgi, T. Klein, R. Gradinger, A. Birgmann, P. Morais, P. Warzok:
"Sonder-Aluminium-Schweißzusätze optimiert für die Verarbeitung im Wire-Arc Additive Manufacturing - Prozess";
in: "DVS Congress",
355;
issued by: DVS;
DVS Media GmbH,
Düsseldorf ,
2019,
ISBN: 978-3-96144-066-5,
#
- ?.
-
M. Schnall, T. Klein, C. Schneider-Bröskamp, M. Silmbroth:
"Modifikation von Aluminium Gussbauteilen per Wire Arc Additive Manufacturing";
in: "50. Sondertagung, SLV München",
issued by: SLV;
SLV,
2022,
#.
-
M. Schnall, W. Stieglbauer:
"WAAM ist nicht Schweißen und umgekehrt - Erfahrungen mit Plasma-Technologie";
in: "Tagungsband DVS Congress 2022",
issued by: DVS Media;
DVS Media,
2022,
#.
Talks and Poster Presentations (with Proceedings-Entry)
-
K. Anders, R. Gradinger:
"Al-Mg-Sc Stringer: Von der Grundlagenuntersuchung zum Prototypen";
Talk: 9. Ranshofner Leichtmetalltage,
Bad Ischl;
2016-11-09
- 2016-11-10; in: "Strategien für nachhaltige Entwicklungen im Leichtbau",
(2016),
22
- 37.
-
K. Anders, R. Gradinger et al.:
"Investigation of the precipitation kinetics of a new Al-Mg-Sc-Zr alloy";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
K. Anders, H. Kilian, R. Gradinger, J. Blaha:
"New manufacturing process for Wankel rotary engine base components";
Talk: Euro PM2012,
Basel;
2012-09-16
- 2012-09-19; in: "Euro PM 2012",
J. Blaha (ed.);
(2012),
#
- ?.
-
K. Anders, H. Kilian, R. Gradinger et al.:
"Innovative Herstellmethoden für Bauteile eines Range Extender Kreiskolbenmotors";
Talk: 7. Ranshofener Leichtmetalltage,
Gmunden (invited);
2012-11-07
- 2012-11-08; in: "7. Ranshofener Leichtmetalltage",
K. Anders (ed.);
LKR-Verlag,
7
(2012),
10
- 15.
-
C. Angermeier, A. Horr:
"An innovative use of CTmethod in light metals development";
Talk: ICT Conference on Computertomographie,
Wels;
2014-02-24; in: "ICT Conference on Computertomographie",
C. Angermeier, A. Horr (ed.);
(2014).
-
A Betz, H. Grün-Lutterotti et al.:
"Center crack detection during continuous casting of aluminium by laser ultrasonic measurements";
Talk: SPIE Sensing Technology and Applications 2014,
Baltimore;
2014-05-05
- 2014-05-09; in: "Proceedings of the SPIE",
SPIE,
(2014).
-
S. Bozorgi, K. Anders, C. Angermeier, C. Chimani:
"The effect of wall thickness and heat treatment on impact energy absorption of AlSi10 casting alloys";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
S. Bozorgi (ed.);
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
S. Bozorgi, K. Anders, C. Angermeier, A. Kraly:
"Untersuchung des Energieabsorptionsvermögens von AlSi10Mg-Gusslegierungen";
Talk: Österreichische Gießereitagung,
Bad Ischl;
2014-04-24
- 2014-04-25; in: "Österreichische Gießereitagung",
ÖGI,
(2014).
-
S. Bozorgi et al.:
"Werkstoffcharakterisierung und neue Methoden zur Vorhersage des Schädigungsverhaltens von A226-Gusslegierungen Teil I";
Talk: 7. Ranshofener Leichtmetalltage,
Gmunden (invited);
2012-11-07
- 2012-11-08; in: "7. Ranshofener Leichtmetalltage",
LKR-Verlag,
7
(2012),
14
- 29.
-
S. Bozorgi, S. Pirker, S. Schneiderbauer, M. Saeedipour:
"A Numerical and experimental study of flow behavior in high pressure die casting";
Talk: TMS 2013,
San Antonio, Texas;
2013-03-03
- 2013-03-07; in: "TMS 2013",
M. Saeedipour, S. Schneiderbauer, S. Pirker, S. Bozorgi (ed.);
(2013).
-
R. Burgstaller, R. Rapp, A. Harrison, S. Frank:
"Dosiersysteme der nächsten Generation für die Strukturbauteile der Zukunft";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07; in: "12. Ranshofener Leichtmetalltage",
LKR,
1
(2022),
#.
-
C. Chimani, R. Kretz et al.:
"Investigations on microstructure effect of changing fluid flow characteristics in high pressure die casting";
Talk: Metallographie 2013,
Stara Lesna;
2013-04-24
- 2013-04-26; in: "Materials Science Forum",
C. Chimani (ed.);
Materials Science Forum,
2013
(2013).
-
C. Chimani, R. Kretz, S. Schneiderbauer, S. Pirker:
"Studies on Flow Characteristics at High-Pressure Die-Casting";
Talk: ICASP 3; The 3rd International Conference on Advances in Solidification Processes,
Aachen;
2011-06-07
- 2011-06-10; in: "ICASP 3 -... the 3rd International Conference on Advances in Solidification Processes",
(2011).
More information
-
C. Chimani, R. Kretz, S. Schneiderbauer, S. Puttinger, S. Pirker:
"Studies on Flow Characteristics at High-Pressure Die-Casting";
Talk: TMS 2012 141 Annual Meeting & Exhibition,
Orlando;
2012-03-11
- 2012-03-15; in: "Light Metals 2012",
Light Metals 2012,
(2012),
443
- 447.
-
C. Chimani, P. Sherstnev, D. Pöschmann, N. Sotirov, T. Waltenberger:
"Prozessentwicklung und Produktcharakterisierung bei hochfesten Aluminiumlegierungen / Process Design and Product Characterization for High Strength Aluminium Alloys";
Keynote Lecture: Neuere Entwicklungen in der Blechumformung,
Fellbach;
2011-05-17
- 2011-05-18; in: "Neuere Entwicklungen in der Massivumformung / New Developments in Forging Technology",
(2011).
More information
-
M. Cihova, R. Schäublin, S. Gerstl, L. Hauser, C. Simson, N. Papenberg, S. Gneiger, C. Schlögl, P. Uggowitzer, J. Löffler:
"Mikrostruktur-Eigenschafts-Korrelationen in aushärtbaren mageren Mg-Legierungen";
Talk: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14; in: "10. Ranshofener Leichtmetalltage",
LKR,
Ranshofen
(2018),
ISBN: 978-3-902092-10-6;
51
- 61.
-
G. Drexler-Schmid, H. Popp, K. Rajinovic, M. Rudolph, F. Hengstberger, R. Gradinger:
"Influence of Phase Change Materials on Thermal Aging of Lithium-Ion Cells";
Poster: Kraftwerk Batterie - Advanced Battery Power 2017,
Aachen;
2017-03-29
- 2017-03-30; in: "Proceedings Advanced Battery Power",
HDT Essem,
(2017),
Paper ID P3-17.
-
A. Elrefaei:
"Cold Metal Transfer Welding of Dissimilar Thickness 6061-T6 to 5182-0 Aluminium Alloys";
Poster: ICMMSE International Conference on Metallurgy, Material Science and Engineering,
Venice;
2014-08-14
- 2014-08-15; in: "Proceedings of the ICMMSE 2014",
(2014).
-
A. Falahati, M. Kumar et al.:
"Prediction of yield strength at room temperature for squeeze cast A226";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
A. Falahati (ed.);
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
G. Falkinger, S. Scheiblhofer, P. Simon:
"Hot Rolling Simulation of Aluminium Alloys using LS Dyna";
Talk: 11th European LS-DYNA Conference,
Salzburg;
2017-05-09
- 2017-05-11; in: "Proceedings 11th European LS-Dyna Conference",
http://www.dynalook.com/11th-european-ls-dyna-conference,
(2017).
More information
-
S. Frank, S. Gneiger:
"Development of non-flammable magnesium alloys";
Talk: ISDM Conference 2017,
Leoben;
2017-05-11
- 2017-05-13; in: "Conference Proceedings ISDM 2017",
ASMET/Montanuniversität Leoben,
(2017),
12 pages.
-
S. Frank, S. Gneiger:
"Magnesium-Lithium alloys";
Talk: 26. Magnesium User- und Automotive Seminar 2018,
Düsseldorf;
2018-10-08; in: "26. Magnesium User- und Automotive Seminar 2018",
26
(2018).
-
S. Frank, S. Gneiger, E. Neunteufl:
"Wire based additive manufacturing (WAAM) of Mg alloys";
Talk: 76th Annual IMA World Magnesium Conference,
Budapest;
2019-05-15
- 2019-05-17; in: "76th Annual IMA World Magnesium Conference",
International Magnesium Association 1000 Westgate Drive,
14/76
(2019),
Paper ID 14,
8 pages.
-
S. Frank, S. Gneiger, E. Neunteufl, M. Schnall:
"Additive Fertigung von brandbeständigen Magnesiumlegierung";
Talk: 27. Magnesium Automotive und Abnehmer Seminar 2019,
Aalen (invited);
2019-10-23
- 2019-10-24; in: "27. Magnesium Automotive und Abnehmer Seminar 2019",
27
(2019).
-
S. Frank, L. Kiessling, S. Gneiger, R. Gradinger, E. Neunteufl, S. Leuders:
"Active inserts, a plug and play solution for increasing mechanical properties and reducing porosity in LPDC-ed parts";
Talk: 12th Tooling Conference & Exhibition, Tooling 2022,
2022-04-25
- 2022-04-27; in: "12th Tooling Conference & Exhibition, Tooling 2022,",
(2022),
#.
-
S. Frank, C. Simson, S. Gneiger:
"Untersuchung von Magnesium-Lithium-Ultra-leichtlegierungen";
Talk: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14; in: "10. Ranshofener Leichtmetalltage",
LKR-Verlag,
Ranshofen
(2018),
ISBN: 978-3-902092-10-6;
218
- 225.
-
S. Frank, S. Ucsnik, M. Hartmann, R. Gradinger, S. Gneiger:
"Smart process chain for the development of additive manufacturing specific aluminium filler wires";
Talk: Aluminium 2018 Conference, Session Plants, Processes, Digitalization,
Düsseldorf;
2018-11-09
- 2018-11-11; in: "Aluminium 2018 Confrence, Session Plants, Processes, Digitalization",
Gesamtverband der Aluminiumindustrie e.v. (GDA),
12
(2018),
1
- 5.
-
C. Gayer, S. Frank, L. Kiessling, S. Gneiger, R. Gradinger, S. Leuders:
"Development of an Active Insert for Improving the Mechanical Properties in Low-pressure Die Casting";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07; in: "12. Ranshofener Leichtmetalltage",
LKR,
(2022),
#.
-
S. Gneiger, A Betz, P. Schäffler:
"A novel processing route for producing magnesium based metal matrix composites";
Talk: World Powder Metallurgy Conference 2016,
Hamburg;
2016-10-09
- 2016-10-13; in: "World Powder Metallurgy Conference 2016",
European Powder Metallurgy Association (EPMA),
Shrewsbury, United Kingdom
(2016),
#
- ?.
-
S. Gneiger, S. Frank, A Betz:
"Development of fire-resistant Magnesium Alloys for Automotive and Aerospace Applications";
Talk: 25. Magnesium Automotive und Abnehmerseminar,
Aalen (invited);
2017-10-22
- 2017-10-23; in: "25. Magnesium Automotive und Abnehmerseminar",
25
(2017),
Paper ID 10.
-
S. Gneiger, S. Frank, A Betz:
"Untersuchung des Elementeinflusses von Ca und Y auf Magnesiumlegierungen";
Talk: 9. Ranshofner Leichtmetalltage,
Bad Ischl;
2016-11-09
- 2016-11-10; in: "Strategien für nachhaltige Entwicklungen im Leichtbau",
(2016),
51
- 66.
-
S. Gneiger, R. Gradinger, A Betz:
"Manufacturing route for producing tailor-made magnesium wires for welding and ALM purposes";
Talk: 2017 World Magnesium Conference,
Singapore;
2017-05-21
- 2017-05-23; in: "Proceedings of the 2017 World Magnesium Conference",
(2017),
Paper ID Session 5, Speaker 4.
-
S. Gneiger, R. Gradinger, C. Simson, B. You, Y. Kim:
"Investigations on microstructure and mechanical properties of non-flammable Mg-Al-Zn-Ca-Y extruded alloys";
Talk: 7th EUCASS 2017,
Mailand;
2017-07-03
- 2017-07-06; in: "Proceedings of the 7th European Conference for Aeronautics and Space Sciences",
(2017),
329 pages.
-
S. Gneiger, D. Koutny, S. Sench, M. Schnall, N. Papenberg, T. Klein:
"Wire-Based Additive Manufacturing of Magnesium Alloys";
Talk: TMS2022 Annual Meeting & Exhibition,
2022-02-27
- 2022-03-04; in: "Magnesium Technology 2022",
Petra Maier Steven Barela Victoria m. Miller Neale R. Neelameggham,
1
(2022),
ISBN: 978-3-030-92533-8;
175
- 179.
-
S. Gneiger, N. Papenberg, S. Frank, R. Gradinger:
"Investigations on microstructure and mechanical properties of non-flammable Mg-Al-Zn-Ca-Y alloys";
Talk: TMS Conference 2018,
Phoenix, USA;
2018-03-11
- 2018-03-15; in: "Conference Proceedings TMS Conference 2018",
(2018),
9 pages.
-
F. Grabner, B. Gruber, C. Schlögl, C. Chimani:
"Cryogenic Sheet Metal Forming - An Overview";
Talk: Thermec'2018,
Paris, Frankreich (invited);
2018-07-09
- 2018-07-13; in: "Materials Science Forum",
941
(2018),
ISSN: 1662-9752;
1397
- 1403.
More information
-
F. Grabner, J. Österreicher:
"A materials science based approach to finite element simulation of warm-forming of Al-Mg-Zn alloys";
Talk: ESAFORM 2022,
2022-04-27
- 2022-04-29; in: "Materials Science Forum",
(2022),
#.
-
R. Gradinger:
"Novel methods of producing 3D hollows in parts produced by ded technologies";
Talk: Metal Additive Manufacturing 2020,
Digital;
2020-09-30
- 2020-10-02; in: "Metal Additive Manufacturing",
(2020),
8 pages.
-
R. Gradinger, J. Berndorfer, A. Kurz:
"Technologietrends in der Luftfahrtindustrie - Auswirkungen auf heimische Zulieferbetriebe";
Talk: 6. Ranshofener Leichtmetalltage,
Bad Ischl;
2010-11-10
- 2010-11-11; in: "6. Ranshofener Leichtmetalltage, Mobilität im Wandel: Anforderungen an modernen Leichtbau und Leichtmetalle",
LKR-Verlag,
06/Ranshofen
(2010),
ISBN: 9783902092069;
20
- 34.
-
R. Gradinger, H.P. Degischer:
"Aluminium foam filled steel tubes as composite shock absorbers";
Talk: Metal Foams and Porous Metal Structures,
1999; in: "Metal Foams and Porous Metal Structures",
(1999),
313
- 316.
-
R. Gradinger, S. Gneiger, A Betz:
"Investigations on fire-resistant magnesium alloys for aerospace applications";
Talk: Light Metals Technologies Conference 2015,
Port Elizabeth;
2015-07-27
- 2015-07-29; in: "Light Metals Technologies Conference 2015",
Materials Science Forum,
828-829
(2015).
-
R. Gradinger, C. Hennrich:
"Einsatzmöglichkeiten von Magnesium-Leichtbaukomponenten in Flugzeugsitzen";
Talk: 8. Ranshofener Leichtmetalltage,
Geinberg (invited);
2014-11-05
- 2014-11-06; in: "8. Ranshofener Leichtmetalltage",
R. Gradinger, C. Hennrich (ed.);
LKR,
8
(2014),
ISBN: 978-3-902092-08-3;
203
- 214.
-
R. Gradinger, A. Schiffl, A. Stachel:
"Light Weight Magnesium Alloys in Aircraft Seat Design";
Talk: 68th Annual World Magnesium Conference,
Prag;
2011-05-08
- 2011-05-10; in: "Proceedings 68th Annual World Magnesium Conference",
(2011).
-
R. Gradinger, M. Schnall:
"Neuartige Konzepte der Hohlkanalherstellung in wire+arc additiv gefertigten Werkzeugen";
Talk: KC-Fachtagung Additive Tooling - Symbiose zwischen Werkzeugbau und additiver Fertigung,
Linz - online (invited);
2020-11-05; in: "Additive Tooling 2020 - Symbiose von Additiver Fertigung und Werkzeugbau",
KC Kunststoff Cluster,
1
(2020).
-
R. Gradinger, N. Sotirov et al.:
"Untersuchungen zur Schweißeignung von höherfesten AA-7075 blechen mittels Delta-Spot-Widerstandsschweißpunktverfahren";
Talk: 7. Ranshofener Leichtmetalltage,
Gmunden (invited);
2012-11-07
- 2012-11-08; in: "7. Ranshofener Leichtmetalltage",
R. Gradinger (ed.);
LKR-Verlag,
7
(2012),
44
- 59.
-
R. Gradinger, N. Sotirov, G. Rettenbacher et al.:
"High strength aluminium sheet metal joining by resistance spot welding";
Talk: 6 th International Light Metals Technology Conference,
Old Windsor;
2013-07-24
- 2013-07-26; in: "Materials Science Forum",
Vol. 765
(2013),
111
- 120.
-
R. Gradinger, P. Stolfig:
"Untersuchungen zum Fügen von Al-Strangpreßprofilen";
Talk: 1. Ranhofener Leichtmetalltage,
Ranshofen;
2000; in: "1. Ranshofener Leichtmetalltage Vom Werkstoff zum Bauteilsystem",
(2000),
71
- 82.
-
R. Gradinger, S. Ucsnik:
"Load Transfer with pin-based form-fit Technology in Steel-Aluminium Hybrid castings";
Talk: Euromat 2013,
Sevilla;
2013-09-08
- 2013-09-13; in: "Euromat 2013",
R. Gradinger (ed.);
FEMS,
2013
(2013).
-
R. Gradinger, S. Ucsnik, S. Karanovic, A. Klug:
"Multi-material 3D printing for components in electronic based system";
Talk: AVL Research Networking Day 2020,
Graz - online (invited);
2020-11-25; in: "AVL Research Networking Day 2020",
(2020).
-
R. Gradinger, J. Voyer, M. Villinger:
"Innovative electro-thermal ice protection system for wind turbine blades";
Talk: Euromat 2013,
Sevilla;
2013-09-08
- 2013-09-13; in: "Euromat 2013",
(2013).
-
K. Hall, H. Kaufmann, A. Mundl:
"Detailed Processing and Cost Consideration for New Rheocasting of Light Metal Alloys";
Talk: 6th International Conference on Semi-Solid Processing of Alloys and Composites,
Turin;
2000; in: "6th International Conference on Semi-Solid Processing of Alloys and Composites",
(2000),
23
- 28.
-
T. Hametner, A. Harrison, T. Holzmüller, R. Kobler, D. Andessner:
"Entwicklung und Prototyping eines Elektromotorengehäuses mit integriertem Kühlkonzept mittels Niderdruckguss";
Talk: 9. VDI-Fachtgagung "Gießtechnik im Motorenbau 2017",
Madeburg, Deutschland;
2017-02-01
- 2017-02-02; in: "ießtechnik im Motorenbau 2017: Potentiale für die nächste Generation von Fahrzeugantrieben, VDI-Berichte 2304",
VDI Wissensforum GmbH, Düsseldorf,
2304
(2017),
ISBN: 978-3-18-092304-8;
15
- 28.
-
M. Hartmann, K. Anders:
"Determination of a simple geometry for the characterisation of the energy absorption behaviour of cast aluminium";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
M. Hartmann, K. Anders et al.:
"Bestimmung der Energieabsorption von Al-Gusslegierungen";
Talk: 8. Ranshofener Leichtmetalltage,
Geinberg (invited);
2014-11-05
- 2014-11-06; in: "8. Ranshofener Leichtmetalltage",
M. Hartmann, K. Anders (ed.);
LKR,
8
(2014),
ISBN: 978-3-902092-08-3;
194
- 202.
-
M. Hartmann, B. Götzinger:
"Einseitiges Stahl-Aluminium Schweißen und dessen Anforderungen an die Schweißdrahtentwicklung";
Talk: 9. Ranshofener Leichtmetalltage,
Bad Ischl;
2016-11-09
- 2016-11-10; in: "8. Ranshofener Leichtmetalltage",
LKR,
(2016),
162
- 163.
-
M. Hartmann, A. Horr et al.:
"Optimization of Energy Absorption Properties for Lightweight Extruded Profiles durch Car Crash";
Talk: AV Tech 2014,
Istanbul;
2014-10-16
- 2014-10-20; in: "AV Tech 2014",
M. Hartmann et al. (ed.);
(2014).
-
M. Hartmann, A. Horr, J. Kranycan:
"Optimization of Energy Absorption Properties for Lightweigt Extrudes Profiles during Car Crash";
Talk: AVTECH 2014 - International Automotive & VEhicle Technologies Conference,
Istanbul;
2014-10-16
- 2014-10-18; in: "AVTECH 2014 - Internaion",
M. Hartmann (ed.);
(2014).
-
M. Hartmann, M. Roschitz:
"Enhanced Battery Pack for Electric Vehicle: Noise Reduction and Increased Stiffness";
Talk: 6 th International Light Metals Technology Conference,
Old Windsor;
2013-07-24
- 2013-07-26; in: "Materials Science Forum",
M. Hartmann, M. Roschitz (ed.);
Vol. 765
(2013),
818
- 822.
-
M. Hartmann, P. Simon, M. Roschitz, Z. Khalil:
"Numerical Investigation of a Hybrid SpaceFrame Structure for Electric Driven Vehicles of the L7e class";
Talk: ANSYS Conference & 6. CADFEM Austria Users' Meeting 2011,
Stuttgart;
2011-10-19
- 2011-10-21; in: "Ansys Conference & 29. Cadfem Users' Meeting",
(2011).
More information
-
T. Hatzenbichler, N. Papenberg:
"Herausforderungen beim Schmieden von Aluminiumkomponenten für Sonderanwendungen im Automobilbereich";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07; in: "12. Ranshofener Leichtmetalltage",
LKR,
1
(2022),
#.
-
Ch. Henkel, P. Schulz, S. Kleiner, P. Uggowitzer:
"Paint Bake Response von Al-Außenhautblechen";
Talk: 1. Ranhofener Leichtmetalltage,
Ranshofen;
2000; in: "1. Ranhofener Leichtmetalltage Vom Werkstoff zum Bauteilsystem",
(2000),
31
- 42.
-
P. Hergan, S. Stelzer, S. Scheiblhofer, G. Cespedes-Gonzales, S. Pfeifer, B. Rittenschober, M. Sieberer, M. Lauermann, R. Schledjewski, E. Fauster:
"HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding";
Talk: 21. Symposium für Verbundwerkstoffe und Werkstoffverbunde,
Bremen;
2017-07-05
- 2017-07-07; in: "Key Engineering Materials",
(2017),
ISSN: 1662-9795;
527
- 534.
More information
-
S. Hoque:
"A comparative study of the hexahedral elements in LS-DYNA for crashworthiness simulation";
Talk: 12th European LS-DYNA Conference 2019,
Koblenz;
2019-05-14
- 2019-05-16; in: "12th European LS-DYNA Conference 2019",
(2019),
#
- ?.
-
S. Hoque, F. Duddeck:
"Experimental and numerical characterization of plasticity and fracture behavior of aluminum 6061-T4 sheet for deep drawing simulation";
Talk: XVI International Conference on Computational Plasticity (COMPLAS 2021),
Barcelona;
2021-09-06
- 2021-09-10; in: "XVI International Conference on Computational Plasticity (COMPLAS 2021)",
(2021).
-
S. Hoque, S. Hovden, J. Nietsch, S. Culic, J. Kronsteiner, D. Horwatitsch:
"Modeling friction in HyperXtrude for hot forward extrusion simulation of AA6060 and AA6082 alloys";
Talk: 25th International Conference on Material Forming (ESAFORM 2022),
2022-04-27
- 2022-04-29; in: "25th International Conference on Material Forming (ESAFORM 2022)",
Esaform 2022,
(2022),
#.
-
S. Hoque, A. Rauscher:
"Axial Crushing of an Aluminum-CFRP Hybrid Component FE-Modeling, Simulation and Experimental Validation";
Talk: 13th European LS-DYNA Conference 2021,
ulm;
2021-10-05
- 2021-10-06; in: "13th European LS-DYNA Conference 2021",
(2021).
-
S. Hoque, S. Scheiblhofer, S. Ucsnik:
"Aspects of numerical simulation for hybrid metal-CFRP components";
Talk: 28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik,
Leoben (invited);
2019-04-25
- 2019-04-26; in: "28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik",
9
(2019),
ISBN: 978-39503248-9-1;
137
- 143.
-
S. Hoque, M. Silmbroth:
"Experimental and Numerical Characterization of Ductile Fracture Properties of EN AW 5183 WAM Profile";
Talk: European Conference on Fracture 2022,
2022-06-27
- 2022-07-01; in: "European Conference on Fracture 2022",
1,
1
(2022),
#.
-
A. Horr:
"Hybrid and Reduced Order Modelling for Digitalisation of Material Processes";
Talk: ASMET Integrated Computational Materials, Process and Product Engineering - IC MPPE 2022,
2022-05-05
- 2022-05-06; in: "IC-MPPE 2022",
Asmet,
(2022),
#.
-
A. Horr:
"Integrated material process simulation for lightweight metal products";
Talk: 17th International conference on computational methods and experimentals,
Opatja;
2015-05-05
- 2015-05-07; in: "Proceeding of computational methods and experimental measurements",
WIT Transactions on Modelling and Simulation,
Vol. 59
(2015),
ISSN: 1743-355x;
11 pages.
-
A. Horr:
"Lightweight alloys process Simulations: multi-scale and hybrid method";
Poster: eSSENCE-EMMC Multiscale Modelling Meeting, 2021,
Online;
2021-06-07
- 2021-06-08; in: "eSSENCE-EMMC Multiscale Modelling Meeting, 2021",
1,
1
(2021).
-
A. Horr:
"Notes on New Physical & Hybrid Modelling Trends for Material Process Simulations";
Talk: 4th International Conference on Applied Physics, Simulation and Computing,
Rom, Italien (invited);
2020-05-23
- 2020-05-25; in: "IOP Journal of Physics - conference series",
1603 012008
(2020),
#.
-
A. Horr:
"Novel frequency-domain damped spectral method for vibration simulation";
Talk: 3rd Conference on Dynamic Simulation in Vehicle Engineering,
St. Valentin;
2014-05-22
- 2014-05-23; in: "3rd Conference Dynamic Simulation in Vehicle Engineering",
(2014).
-
A. Horr:
"Numerical damage and failure modelling of lightweight alloys during metal forming processes";
Talk: ESAFORM Conference on Material Forming,
Graz;
2015-04-15
- 2015-04-17; in: "Key Engineering Materials, Trans Tech Publications",
Trans Tech Publications,
Vols 651-653
(2015),
6 pages.
-
A. Horr:
"On Fatigue Analyses of Additive Manufacturing Parts: Review of Hybrid Techniques";
Talk: ASMET Metal Additive Manufacturing conference 2021,
Wien;
2021-11-03
- 2021-11-05; in: "MAMC21 Conference Proceeding",
(2021),
#.
-
A. Horr, C. Angermeier, A. Harrison:
"Full trough process simulation for low pressure die casting - from casting to design";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
A. Horr, A Betz:
"Advanced fluid-thermal-mechanical casting simulation of lightweight alloys";
Talk: Liquid metal Processing & Casting Conference 2015,
Leoben;
2015-09-20
- 2015-09-24; in: "Proceedings of the Liquid Metal Processing & Casting conference 2015",
A. Horr, A Betz (ed.);
(2015),
490
- 497.
-
A. Horr, A Betz:
"Optimisation of Aluminium Casting Technology: Thermal Energy Approach";
Talk: European Aluminium Congress 2015,
Düsseldorf;
2015-11-23
- 2015-11-24; in: "Proceedings of the European Aluminium Congress",
A. Horr, A Betz (ed.);
Gesamtverband der Aluminiumindustrie e.V.,
1
(2015),
1
- 13.
-
A. Horr, H. Drexler:
"On Reduced and Detailed Simulations of Additve Manufacturing Processes";
Talk: Metal Additive Manufacturing Conference - MAMC 2022,
2022-09-26
- 2022-09-28; in: "MAMC2022 Conference Proceeding",
(2022),
#.
-
A. Horr, R. Kretz, A Betz, C. Chimani:
"Multi physical process simulation of continuous casting - full interactive simulation";
Talk: ECCC 8th Europeas Continuous Casting Conference 2014,
Graz;
2014-06-23
- 2014-06-26; in: "ECCC 8th European Continuous Casting Conference 2014",
ASMET,
(2014).
-
A. Horr, R. Kretz, M. Just:
"Numerical damage modeling of aluminium alloys for wide range of stress triaxiality";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
A. Horr, J. Kronsteiner, C. Mühlstätter, S. Scheiblhofer:
"Recent Advances in Aluminium Casting Simulation: Evolving Domains & Dynamic Meshing";
Talk: Aluminium Two Thousand World Congress,
Verona;
2017-06-20
- 2017-06-24; in: "Procedings of Aluminium Two Thousand World Congress",
online proceedings,
(2017),
9 pages.
More information
-
D. Horwatitsch:
"Neue Visualisierungsmethode für Materialfluss beim Strangpressen";
Talk: DEFORM Users Meeting 2014,
Kremsmünster;
2014-01-27
- 2014-01-28; in: "DEFORM Users Meeting",
D. Horwatitsch (ed.);
(2014).
-
D. Horwatitsch et al.:
"Applicability of friction testing methods for determination of friction under forming conditions";
Talk: Plasticity 2013,
Nassau, Bahamas;
2013-01-03
- 2013-01-08; in: "Plasticity 2013",
D. Horwatitsch (ed.);
(2013).
-
D. Horwatitsch et al.:
"Development of a test method for determining friction ar deformation conditions";
Talk: ÖTG-Symposium,
Graz;
2013-11-28; in: "ÖTG-Symsosium 2013",
D. Horwatitsch (ed.);
(2013).
-
D. Horwatitsch et al.:
"the role of tool geometry and process parameters in high temperature metal shearing";
Talk: ICTMP 2014 International Conference on Tribology in Manufacturing Processes & Joining by Plastic Deformation,
Darmstadt;
2014-06-22
- 2014-06-24; in: "Advanced Materials Research",
Trans Tech Publications,
966-967
(2014),
ISSN: 1022-6680.
-
D. Horwatitsch, J. Herr, A. Hinterer:
"Material flow visualization for metal extrusion on near industrial scale";
Talk: ESAFORM 2022,
Braga;
2022-04-27
- 2022-04-29; in: "Proceedings ESAFORM 2022",
(2022),
#.
-
D. Horwatitsch, E. Kabliman, J. Kronsteiner, C. Schlögl:
"Mikrostruktursimulation in Schmiedeprozessen - von Warmstauchversuchen zum realen Prozess";
Talk: 1. Workshop "Alu-Schmieden",
Zauchensee;
2019-03-21
- 2019-03-22; in: "1. Workshop "Alu-Schmieden"",
1
(2019),
ISBN: 978-3-902078-24-7;
64
- 69.
-
D. Horwatitsch, P. Klimek, M. Schuster:
"Effiziente Ermittlung von Koeffizienten erweiterter Reibmodelle";
Talk: ÖGT Symposium 2017 - Tribologie in Industrie und Forschung,
Wiener Neustadt;
2017-11-22; in: "Symposium 2017 - Tribologie in Industrie und Forschung",
F. Franek, N. Dörr, A. Pauschitz, E. Badisch (ed.);
Österreichische Tribologische Gesellschaft,
(2017),
ISBN: 978-3-901657-56-6;
69
- 76.
-
D. Horwatitsch, A. Merstallinger, K. Steinhoff:
"Evaluation of the Ring Compression Test for the Parameter Determination of Extended Fritction Models";
Talk: ICAA 13,
Pittsburgh;
2012-06-03
- 2012-06-07; in: "ICAA 13",
Wiley,
1
(2012),
ISBN: 978-1-118-458044;
Paper ID 675,
680 pages.
-
D. Horwatitsch, A. Merstallinger, K. Steinhoff:
"Vergleich von zwei Reibungstestmethoden für die Simulation von Umformprozessen";
Talk: ÖTG-Symposium,
Graz;
2013-11-28; in: "ÖTG Symposium 2013",
D. Horwatitsch (ed.);
(2013).
-
D. Horwatitsch, J. Müller, H. Kilian et al.:
"Validation of simulated material flow in aluminium hot extrusion with a novel visualisation method";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Periodical of Materials Science Forum",
D. Horwatitsch (ed.);
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
D. Horwatitsch, D. Pöschmann et al.:
"Beitrag der FE-basierten Prozesssimulation zur Optimierung von Zerspanungsprozessen";
Talk: 7. Ranshofener Leichtmetalltage,
Gmunden (invited);
2012-11-07
- 2012-11-08; in: "7. Ranshofener Leichtmetalltage",
D. Horwatitsch (ed.);
LKR-Verlag,
7
(2012),
114
- 128.
-
D. Horwatitsch, K. Steinhoff:
"Die Streifenziehanlage Hs++ - Eine Versuchsmethode Zur Messung Der Reibzahl Unter Umformbedingungen";
Talk: ÖTG Symposium 2011 - Tribologie in Industrie und Forschung Werkstoff- u. Energieeffizienz - Herausforderung und Lösungsansätze,
Wiener Neustadt;
2011-11-24; in: "ÖTG Symposium 2011 - Tribologie in Industrie und Forschung Werkstoff- u. Energieeffizienz - Herausforderung und Lösungsansätze",
(2011),
152
- 162.
-
D. Horwatitsch, K. Steinhoff, R. Gradinger, A. Merstallinger:
""Determination of friction conditions for implementation in FEM based process simulation of backward can extrusion"";
Talk: Oral presentation and proceedings,
Esslingen;
2008-01-15
- 2008-01-17; in: "16th International Colloquium Tribology",
(2008).
-
S. Hovden, J. Kronsteiner, S. Jäger, E. Kabliman:
"Influence of Solidification-Dependent Microstructure on Subsequent Metal Forming Operations";
Talk: 13th European LS-DYNA Conference 2021,
Ulm;
2021-10-05
- 2021-10-06; in: "13th European LS-DYNA Conference",
(2021),
#.
-
S. Jäger, A. Horr, S. Scheiblhofer:
"Thermal evolution effects on solidification process during continuous casting";
Poster: 6th Decennial International Conference on Solidification Processing,
Old Windsor;
2017-07-25
- 2017-07-28; in: "Solidification Processing 2017",
(2017),
ISBN: 978-1-908549-29-7;
675
- 678.
-
E. Kabliman:
"A coupled modeling of solid solution strengthening in aluminium alloys upon heat treatment";
Poster: Euromat 2013,
Sevilla;
2013-09-08
- 2013-09-13; in: "Euromat 2013",
E. Kabliman (ed.);
(2013).
-
E. Kabliman:
"A physical-based approach to study microstructure evolution during production of aluminium semi-finished products";
Poster: 8th International Conference on Multiscale Materials Modeling,
Dijon;
2016-10-09
- 2016-10-14; in: "MMM2016",
P2.79
(2016),
253
- 254.
-
E. Kabliman:
"Numerische Simulation und Materialmodellierung in der Leichtmetallindustrie";
Talk: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03; in: "11. Ranshofener Leichtmetalltage",
(2020),
ISBN: 978-3-902092-11-3.
-
E. Kabliman, S. Bozorgi, I. Baumgartner, J. Kronsteiner:
"Influence of precipitation kinetics on static recrystallization during hot deformation of a 2xxx alloy";
Talk: 8th International Conference on Multiscale Materials Modeling,
Dijon;
2016-10-09
- 2016-10-14; in: "MMM2016",
(2016),
253
- 254.
-
E. Kabliman, C. Schlögl, J. Kronsteiner, E. Kozeschnik:
"Integrated Modeling of Materials Microstructure during Thermo-Mechanical Processing: a Dyna2Micro Material Model";
Talk: EUROMAT 2017,
Thessaloniki;
2017-09-17
- 2017-09-22; in: "EUROMAT 2017 Symposium",
D.5 Oral Presentations
(2017),
Paper ID D5-O-THU-PM2,
1 pages.
-
E. Kabliman, P. Sherstnev:
"Integrated modeling of strength evolution in Al-Mg-Si alloys during hot deformation";
Talk: 6 th International Light Metals Technology Conference,
Old Windsor;
2013-07-24
- 2013-07-26; in: "Materials Science Forum",
Vol. 765
(2013),
429
- 433.
-
E. Kabliman, P. Sherstnev:
"Physikalisch basierte Simulation des Rekristallisationsverhaltens in einer Al-Cu-Mg-Mn-Legierung während der Warmumformung und anschließender Wärmebehandlung";
Talk: 8. Ranshofener Leichtmetalltage,
Geinberg;
2014-11-05
- 2014-11-06; in: "8. Ranshofener Leichtmetalltage",
E. Kabliman, P. Sherstnev (ed.);
LKR,
8
(2014),
ISBN: 978-3-902092-08-3;
50
- 59.
-
H. Kaufmann:
"Fatigue of Aluminium foams at ultrasonic frequences";
Talk: Metal Foams and Porous Metal Strucutres,
1999; in: "Metal Foams and Porous Metal Strucutres",
(1999),
373
- 378.
-
H. Kaufmann, R. Kretz:
"Cost modeling for the fabrication of aluminium foam via powder metallurgical route";
Talk: Metal Foams and Porous Metal Structures,
1999; in: "Metal Foams and Porous Metal Structures",
(1999),
57
- 61.
-
H. Kaufmann, D. Limburg, H. Wabusseg, P. Uggowitzer:
"Das New Rheocasting - Verfahrensprinzip und Stand der Entwicklungsarbeiten";
Talk: 1. Ranhofener Leichtmetalltage,
Ranshofen;
2000; in: "1. Ranshofener Leichtmetalltage Vom Werksotff zum Bauteilsystem",
(2000),
109
- 121.
-
H. Kaufmann, M. Nakamura, H. Wabusseg, P. Uggowitzer:
"New Rheocasting";
Talk: Die Casting World,
2000; in: "Die Casting World",
(2000).
-
H. Kaufmann, P. Uggowitzer:
"Das New Rheocasting (NRC) - Verfahren von Mg-Legierungen";
Talk: Mg-Abnehmerseminar,
Aalen;
2000; in: "Mg-Abnehmerseminar",
(2000).
-
H. Kaufmann, P. Uggowitzer:
"Influence of Heat Treatment Conditions on the Properties of New Rheocast Light Metal Alloys";
Talk: Processing for Properties II,
San Francisco;
2000; in: "Processing for Properties II",
(2000).
-
H. Kaufmann, P. Uggowitzer:
"The Fundamentals of New Rheocasting of Mg - Alloys";
Talk: Magnesium Alloys and their Applications,
2000; in: "Magnesium Alloys and their Applications",
Wiley-VCH Verlag GmbH,
Weinheim
(2000),
533
- 539.
-
H. Kaufmann, H. Wabusseg, P. Uggowitzer:
"Casting of Light Metal Wrought Alloys by New Rheocasting";
Talk: 6th International Conference on Semi-Solid Processing of Alloys and Composites,
Turin;
2000; in: "6th International Conference on Semi-Solid Processing of Alloys and Composites",
(2000),
457
- 462.
-
T. Klein, M. Schnall, R. Gradinger:
"Drahtbasierte additive Fertigung von hoch-performanten Al-Zn-Mg-Cu Legierungen";
Talk: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03; in: "11. Ranshofener Leichtmetalltage",
(2020),
ISBN: 978-3-902092-11-3.
-
A. Kolody, E. Kabliman, J. Kronsteiner, G. Kronberger, M. Kommenda:
"Prediction of Stress-Strain Curves for Aluminium Alloys using Symbolic Regression";
Talk: ESAFORM Magazin,
Vitoria, Spanien;
2019-05-08
- 2019-05-10; in: "ESAFORM Magazine",
(2019),
#
- ?.
-
R. Kopun, S. Ucsnik, D. Zhang, P. Sampl, S. Jäger, R. Tatschl:
"Abschrecken von heißen Aluminiumplatten durch Wasserstrahlkühlung - Numerische Simulation mit modifizierten CFD-Wasserkühlungsmodellen und experimentelle Validierung";
Talk: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14; in: "10. Ranshofener Leichtmetalltage",
LKR-Verlag,
Ranshofen
(2018),
ISBN: 978-3-902092-10-6;
17.
-
R. Kopun, S. Ucsnik, D. Zhang, P. Sampl, S. Jäger, R. Tatschl:
"High temperature Aluminium plate cooling by water impingement - numerical simulation with adapted CFD water cooling models an experimental validation";
Talk: WIT Transactions on Engineering Sciences - Computational & Experimental Methods in Mulitphase and Complex Flow X,
Lissabon;
2019-05-21
- 2019-05-23; in: "WIT Transactions on Engineering Science",
S. Hernández, University of A Coruna, Spain; P. Vorobieff, University of New Mexico, USA,
123
(2019),
ISBN: 978-1-78466-329-2;
13 pages.
-
R. Kretz:
"Manufacturing and testing of aluminium foam structural pats for passenger cars demonstrated by example of a rear intermediate panel";
Talk: Metal Foams and Porous Metal Structures,
1999; in: "Metal Foams and Porous Metal Structures",
(1999),
23
- 28.
-
R. Kretz:
"Neue Leichtmetallwerkstoffe und ihre Herstellverfahren";
Talk: Lehrgang an der Technischen Akademie Esslingen,
Ostfildern-Nellingen;
2000-02-10
- 2000-02-10; in: "Lehrgang an der Technischen Akademie Esslingen",
(2000).
-
R. Kretz, S. Gneiger, A Betz, C. Angermeier, H. Hubbauer:
"Magnesium extrusions billets - opportunities and risks";
Talk: 10th International Conference on Magnesium Alloys and their Applications,
Jeju;
2015-10-11
- 2015-10-16; in: "Proceedings of the 10th international conference on magnesium alloys and their applications",
Korean Institute of Metals and Materials,
Jeju
(2015),
808
- 813.
-
R. Kretz, B. Götzinger:
"Deformationselemente aus Aluminiumschaum für den Insassenschutz im Personenwagen";
Talk: 1. Ranhofener Leichtmetalltage,
Ranshofen;
2000; in: "1. Ranshofener Leichtmetalltage Vom Werkstoff zum Bauteilsystem",
(2000),
185
- 195.
-
R. Kretz, M. Kettner:
"Destillation von Magnesium - Die Gewinnung de Leichtmetalls durch Verdampfen und Kondensieren";
Talk: 5. Ranshofener Leichtmetalltage,
Geinberg;
2008-05-28
- 2008-05-29; in: "5. Ranshofener Leichtmetalltage",
(2008).
-
R. Kretz, Z. Khalil, P. Simon:
"Multifunctional Components in vehicle space frames - Cast parts for prototypes and small series";
Keynote Lecture: 3. Wissenschaftliches Symposium des SFB/TR 39 "PT-PIESA",
Chemnitz;
2011-10-12
- 2011-10-13; in: "(*)",
(2011),
'?.
More information
-
J. Kronsteiner, D. Horwatitsch, I. Baumgartner:
"Impact of temperature rise on deformation dilatometer test method";
Talk: SSTT 2014,
Graz;
2014-05-23
- 2014-05-25; in: "SSTT 2014",
J. Kronsteiner (ed.);
(2014).
-
J. Kronsteiner, D. Horwatitsch, A. Hinterer, C. Gusenbauer, K. Zeman:
"Experimental determination of plastic strain in the extrusion process";
Talk: 19th ESAFORM Conference 2016,
Nantes;
2016-04-27
- 2016-04-29; in: "AIP Conference Proceedings",
AIP Publishing,
1769
(2016),
Paper ID 140001,
6 pages.
More information
-
J. Kronsteiner, D. Horwatitsch, K. Zeman:
"Comparison of Updated Lagrangian FEM with Arbitrary Lagrangian Eulerian method for 3D thermo-mechanical extrusion of a tube profile";
Talk: ESAFORM 2017,
Dublin;
2017-04-26
- 2017-04-28; in: "AIP Conference Proceedings",
ESAFORM,
1896
(2017),
Paper ID 140006,
6 pages.
More information
-
J. Kronsteiner, S. Hovden, A. Arnoldt, J. Österreicher:
"Simulation of coarse grain evolution during hot extrusion of Al-Mg-Si alloys";
Talk: ESAFORM 2022,
2022-04-27
- 2022-04-29; in: "Key Engineering Material",
(2022),
#.
-
J. Kronsteiner, S. Hovden, A. Arnoldt, J. Österreicher:
"Wechselwirkung zwischen Mikrostruktur und Materialfluss während des Strangpressens - ein geschichtsbasierter Ansatz";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07; in: "12. Ranshofener Leichtmetalltage",
LKR,
1
(2022),
#.
-
J. Kronsteiner, S. Ucsnik, D. Horwatitsch:
"Virtual tool design for metal extrusion of filler wires by means of thermo-mechanical process simulation including hybrid friction models";
Talk: NWC 2017,
Stockholm;
2017-06-11
- 2017-06-14; in: "NAFEMS World Congress 2017",
NAFEMS,
(2017),
Paper ID 817.
-
J. Kronsteiner, S. Ucsnik, S. Stelzer:
"Determination of input parameters for a mix-mode cohesive zone formulation in a novel metal-CFRP-joining interface";
Talk: ECCM 16 European Conference on Composite Materials,
Sevilla;
2014-06-22
- 2014-06-26; in: "Proceedings of ECCM 16",
J. Kronsteiner, S. Ucsnik (ed.);
(2014).
-
M. Kumar:
"cryogenig forming behaviour of AW-6016 -T4 sheet";
Talk: 15th Int. confernece on Aluminium Alloys,
Chongquing;
2016-06-12
- 2016-06-16; in: "15th International Conference on Aluminium Alloys",
M. Kumar (ed.);
Chongquing University,
(2016),
6 pages.
-
M. Kumar:
"Thermo-kineticmodelling and analysis of simulanteous hot stamping and quenching of AA6016 alloy sheet";
Talk: MEFORM 2016,
Freiburg;
2016-03-16
- 2016-03-18; in: "MEFORM 2016",
M. Kumar (ed.);
Materials Science Forum,
854
(2016),
ISSN: 1662-9752;
7 pages.
-
M. Kumar, S. Bozorgi, I. Baumgartner, C. Chimani:
"High temperature tensile deformation of as-cast AA6061 and AA7005 alloys";
Talk: Euro LightMAT,
Bremen;
2013-09-03
- 2013-09-15; in: "Euro LightMAT",
M. Kumar (ed.);
(2013).
-
M. Kumar, G. Kirov, F. Grabner, E. Mukeli, O. Kessler:
"Sheet forming processes for AW-7xxx alloys: Relevant process parameters";
Talk: Thermec 2016,
Graz;
2016-05-29
- 2016-06-03; in: "Thermec 2016",
M. Kumar, G. Kirov et al. (ed.);
(2016).
-
M. Kumar, N. Ross, I. Baumgartner:
"Development of a continuous cooling transformation diagram for an Al-Zn-Mg alloy using dilatometry";
Talk: Light Metals Technologies Conference 2015,
Port Elizabeth;
2015-07-27
- 2015-07-29; in: "Light Metals Technologies Conference 2015",
Materials Science Forum,
828-829
(2015),
6 pages.
-
M. Kumar, N. Sotirov, C. Chimani:
"Effect of warm forming onprecipitation kinetics and mechanical properties of peak-aged 7020 aluminium sheet";
Talk: IDDRG 2012,
Mumbai;
2012-11-25
- 2012-11-29; in: "IDDRG 2012",
M. Kumar (ed.);
(2012).
-
M. Kumar, N. Sotirov, C. Chimani, P. Oberhauser et al.:
"Feasibility of hot stamping of high strength Al-Zn-Mg alloy sheet";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
M. Kumar (ed.);
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
R. Laag, F. Simancik, W. Rajner, R. Kretz:
"Aluminiumschaum-Legierungen als neuartige Werkstoffe für den Leichtbau";
Talk: 1. Ranhofener Leichtmetalltage,
Ranshofen;
2000; in: "1. Ranshofner Leichtmetalltage Vom Werkstoff zum Bauteilsystem",
(2000),
169
- 184.
-
F. Langbein, K. Anders et al.:
"Aluminium Gleitlager der Zukunft - Innovation durch einen neuen Halbzeug-Fertigungsprozess";
Talk: 8. Ranshofener Leichtmetalltage,
Geinberg (invited);
2014-11-05
- 2014-11-06; in: "8. Ranshofener Leichtmetalltage",
F. Langbein, K. Anders et al. (ed.);
LKR,
8
(2014),
ISBN: 978-3-902092-08-3;
60
- 73.
-
D. Leitlmeier, H. Flankl:
"Al-Schaumherstellung auf schmelzmetallurgischem Wege";
Talk: 1. Ranhofener Leichtmetalltage,
Ranshofen;
2000; in: "1. Ranshofener Leichtmetalltage Vom Werkstoff zum Bauteilsystem",
(2000),
155
- 168.
-
C. Mayer, T. Hametner, S. Parragh, K. Whitelegg, T. Weber, S. Wassertheurer:
"Interplay between sex and diagnosis of coronary artery disease in survival analysis in a high risk cohort";
Poster: ESC Congress 2017,
Barcelona;
2017-08-26
- 2017-08-30; in: "European Heart Journal",
Volume 38, Issue suppl_1
(2017),
ISSN: 0195-668x;
1124 pages.
-
C. Mühlstätter:
"Investigation of conjugate heat transfer including phase change phenomena in quenching process";
Poster: ICCFD10,
Barcelonca;
2018-07-09
- 2018-07-13; in: "Proceedings International Conference on Computational Fluid Dynamics",
Proceedings International Conference on Computational Fluid Dynamics,
(2018).
-
J. Müller, A. Wahlen, D. Horwatitsch:
"FEM-Simulation des Strangpressens inkl. Fließverhalten der Aluminiumlegierung EN AW-6082";
Talk: 8. Ranshofener Leichtmetalltage,
Geinberg (invited);
2014-11-05
- 2014-11-06; in: "8. Ranshofener Leichtmetalltage",
J. Müller, A. Wahlen, D. Horwatitsch (ed.);
LKR,
8
(2014),
ISBN: 978-3-902092-08-3;
74
- 87.
-
J. Österreicher, A. Schiffl, G. Falkinger, G. Bourret:
"Microstructure and mechanical properties of high strength Al-Mg-Si-Cu profiles for safety parts";
Talk: Int. Conference on Materials, Processing and Product Engineering 2015,
Paris;
2015-07-15
- 2015-07-17; in: "Materials Science and Engineering",
J. Österreicher, A. Schiffl et al. (ed.);
IOP,
119
(2016),
Paper ID 012028,
9 pages.
-
N. Papenberg, C. Simson, S. Gneiger:
"Mg-Ca-X Alloys - A Brief Fact sheet of High-Strength Mg Wrought Alloys";
Talk: TMS2022 Annual Meeting & Exhibition,
2022-02-27
- 2022-03-04; in: "Magnesium Technology 2022",
(2022),
37
- 42.
-
D. Pöschmann, Ch. Henkel, R. Pippan, P. Uggowitzer:
"Characterization of microstructure and fracture behaviour of 7050 aluminium alloy after hot forming by means of charpy impact test";
Talk: Conference on Fracture, ECF 18,
Dresden;
2010-08-30
- 2010-09-03; in: "Fracture of Materials and Structures from Micro to Macro Scale",
(2010).
-
D. Pöschmann, Ch. Henkel, P. Uggowitzer, R. Pippan:
"Einfluss von Warmumformung auf die Gefügeausbildung und das Bruchverhalten einer 7xxx Aluminiumlegierung";
Talk: 6. Ranshofener Leichtmetalltage,
Bad Ischl;
2010-11-10
- 2010-11-11; in: "6. Ranshofener Leichtmetalltage, Mobilität im Wandel: Anforderungen an modernen Leichtbau und Leichtmetalle",
LKR-Verlag,
6/Ranshofen
(2010),
ISBN: 9783902092069;
150
- 159.
-
D. Pöschmann, P. Uggowitzer, Ch. Henkel, R. Pippan:
"Implementation of Sub-Sized Fracture Specimen for Characterization of Hot Forming Experiments on 7050 Aluminium Alloy";
Talk: ECAA 2011,
Bremen;
2011-10-05
- 2011-10-07; in: "ECAA 2011, European Conference on Aluminium Alloys",
(2011).
More information
-
H. Popp, M. Rudolph, G. Drexler-Schmid, R. Gradinger, K. Rajinovic:
"Investigation Influnce of Phase Change Material on Reaction of Lithium-Ion Cells to Abusive Conditions";
Poster: Kraftwerk Batterie - Advanced Battery Power,
Aachen;
2017-03-29
- 2017-03-30; in: "Proceedings Advanced Battery Power",
HDT Essem, DE,
(2017),
Paper ID P3-03.
-
R. Potzinger, H. Kaufmann, P. Uggowitzer:
"Mangesium New Rheocasting - a novel approach to high quality magnesium castings";
Talk: 6th International Conference on Semi-Solid Processing of Alloys and Composites,
Turin;
2000; in: "6th International Conference on Semi-Solid Processing of Alloys and Composites",
(2000),
85
- 90.
-
J. Romo, R. Schäfer, F. Maspero, D. Horwatitsch:
"Urban-EV: Entwicklung eines sicheren, elektrischen Stadtfahrzeugs der L7e Klasse";
Talk: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14; in: "10. Ranshofener Leichtmetalltage",
LKR,
(2018),
ISBN: 978-3-902092-10-6;
145
- 157.
-
N. Ross, A. Beer, M. Barnett:
"compositional Effects on the Restoration Behaviour in Mg-Zn-Re-Alloys";
Talk: 6 th International Light Metals Technology Conference,
Old Windsor;
2013-07-24
- 2013-07-26; in: "Materials Science Forum",
Vol. 765
(2013),
18
- 22.
-
N. Ross, R. Kretz et al.:
"Effect on Zn and Zr concentraton and extrusion conditions on the mechanical properties of lean ZK alloys";
Talk: Light Metals Technologies Conference 2015,
Port Elizabeth;
2015-07-27
- 2015-07-29; in: "Light Metals Technologies Conference 2015",
Materials Science Forum,
828-829
(2015),
6 pages.
-
M. Saeedipour, S. Bozorgi et al.:
"Numerical simulation of turbulent liquid jet breakup using a sub-grid criterion with industrial application";
Talk: ILASS Europe 2014,
Bremen;
2014-10-08
- 2014-10-10; in: "ILASS Europe 2014",
(2014).
-
M. Saeedipour, S. Schneiderbauer, S. Pirker, S. Bozorgi:
"Prediction of surface porosity defects in high pressure die casting";
Talk: TMS 2015 - 144th Annual Meeting & Exhibition,
Orlando;
2015-03-15
- 2015-03-19; in: "TMS 2015",
M. Saeedipour, S. Schneiderbauer, S. Pirker, S. Bozorgi (ed.);
(2015).
-
S. Scheiblhofer:
"Introduction Of Beadings Into A Crash Tube Using A Robust Optimisation Approach";
Talk: ECCOMAS Congress 2016,
Kreta;
2016-06-05
- 2016-06-10; in: "ECCOMAS Proceedia",
https://www.eccomasproceedia.org/conferences/eccomas-congresses/eccomas-congress-2016?,
(2016),
ISBN: 978-618-82844-0-1;
Paper ID 2244,
8 pages.
More information
-
S. Scheiblhofer, M. Hartmann:
"Simplifying a full vehicle model for FE-analysis";
Talk: 9th European Altair Technology Conference,
Frankenthal;
2017-06-26
- 2017-06-28; in: "Conference Proceedings",
(2017),
50.
More information
-
S. Scheiblhofer, S. Jäger, A. Horr:
"Coupling FEM and CFD solvers for continuous casting process simulation using preCICE";
Talk: VIII International Conference on Computational Methods for Coupled Problems in Science and Engineering,
Sitges (Barcelona);
2019-06-03
- 2019-06-05; in: "ECCOMAS Coupled Problems 2019",
(2019),
ISBN: 978-84-949194-5-9;
23
- 32.
-
S. Scheiblhofer, J. Kronsteiner, S. Ucsnik:
"Simulation of pulsed water cooling for continuous casting with Ls-Dyna";
Talk: LS DYNA Forum 2016,
Bamberg;
2016-10-10
- 2016-10-12; in: "14. Ls-Dyna Forum 2016",
(2016),
16
- 17.
-
S. Scheiblhofer, S. Ucsnik:
"Deformation Prediction of RTM Produced Hybrid Metal-carbon Composites";
Talk: NAFEMS World Congress 2017,
Stockholm;
2017-06-11
- 2017-06-14; in: "NWC 2017 Summary of Proceedings",
NAFEMS Ltd.,
(2017),
ISBN: 978-1-910643-37-2;
254.
More information
-
S. Scheiblhofer, S. Ucsnik, A. Horr:
"Additive Manufacturing Process Simulation for Large Scale Components";
Poster: ECCOMAS Sim-AM 2017,
München;
2017-10-11
- 2017-10-13; in: "Simulation for Additive Manufacturing",
(2017),
58
- 59.
-
A. Schiffl:
"Hot Top Vertikalstrangguss von Magnesium";
Talk: Symposium Stranggießen,
Ulm (Deutschland);
2010-11-15
- 2010-11-17; in: "Stranggießen",
Deutsche Gesellschaft für Materialkunde,
(2010),
ISBN: 978-3-88355-3849;
15
- 20.
-
A. Schiffl, M. Easton:
"Influence of SiC particles on the grain refinement of an Mg-Alloy";
Talk: Light Metals Technology 2009,
Gold Coast, Australien;
2009-06-28
- 2009-07-01; in: "Light Metals Technology 2009",
-,
-
(2009).
More information
-
A. Schiffl, P. Gunde, P. Uggowitzer:
"Maßnahmen beim Magnesiumstrangguss zur Reduktion der Heißrissneigung";
Talk: 6. Ranshofener Leichtmetalltage,
Bad Ischl;
2010-11-10
- 2010-11-11; in: "6. Ranshofener Leichtmetalltage, Mobilität im Wandel: Anforderungen an modernen Leichtbau und Leichtmetalle",
C. Chimani, P. Uggowitzer, W. Fragner, A. Wahlen (ed.);
LKR-Verlag,
6/Ranshofen
(2010),
ISBN: 9783902092069;
96
- 107.
-
A. Schiffl, M. Hartmann, I. Schiffl, J. Österreicher, C. Mühlstätter:
"Analyse von Einflussfaktoren auf die Extrudierbarkeit und Crashfähigkeit von modifizierten, hochfesten 6082 Profilen";
Talk: 9. Ranshofner Leichtmetalltage,
Bad Ischl;
2016-11-09
- 2016-11-10; in: "Strategien für nachhaltige Entwicklungen im Leichtbau",
(2016),
147
- 162.
-
C. Schlögl, E. Kabliman, J. Österreicher, N. Papenberg, E. Neunteufl:
"Gefügebasierte Optimierung der Prozessroute für Aluminiumschmiedebauteile";
Talk: 1. Workshop "Alu-Schmieden",
Zauchensee;
2019-03-21
- 2019-03-22; in: "1. Workshop "Alu-Schmieden"",
(2019),
ISBN: 978-3-902078-24-7;
72
- 77.
-
C. Schneider-Bröskamp, M. Silmbroth, T. Klein:
"Drahtbasierte additive Fertigung der Luftfahrtlegierung AA2024";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07; in: "12. Ranshofener Leichtmetalltage",
1,
1
(2022),
70
- 76.
More information
-
P. Sherstnev:
"Prediction of the yield strength during a heat treatment of deformed Al-Mg-Si alloys";
Keynote Lecture: 5th International Light Metal Technology Conference,
Lüneburg;
2011-07-19
- 2011-07-22; in: "5th International Light Metal Technology Conference",
(2011).
More information
-
P. Sherstnev, A. Zamani:
"Modeling of static and geometric dynamic recrystallization during hot extrusion of Al-Mg-Si alloy";
Talk: International Conference on Aluminium Application,
Trondheim;
2014-06-15
- 2014-06-19; in: "Materials Science Forum",
P. Sherstnev (ed.);
Materials Science Forum,
794 - 796
(2014),
ISSN: 1662-9752.
-
C. Simson:
"Compositionally Complex Alloys im Bereich niedriger Dichten - experimentelle und thermodynamische Betrachtungen";
Talk: 9. Ranshofener Leichtmetalltage,
Bad Ischl;
2016-11-09
- 2016-11-10; in: "8. Ranshofener Leichtmetalltage",
LKR,
(2016),
166
- 179.
-
C. Simson:
"Hochfeste Magnesium-Lithium Ultraleichtlegierungen mit intrinsischer Nanostrukturierung";
Talk: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03; in: "11. Ranshofener Leichtmetalltage",
(2020),
ISBN: 978-3-902092-11-3.
-
S. Singh, Z. Khalil, P. Simon:
"Form- und kraftschlüssige Verbindungen mit neuartigen Blindniete und Schließringbolzen";
Talk: 4. Landshuter Leichtbau Colloquium 2009,
Landhut;
2009-02-26
- 2009-02-27; in: "4. Landshuter Leichtbau Colloquium 2009",
Leichtbau-Cluster Landshut,
4. Landshuter Leichtbau- Colloquium
(2009),
ISBN: 978-3-9812696-0-4;
71
- 88.
-
S. Singh, Z. Khalil, P. Simon:
"Form- und kraftschlüssige Verbindungen mit neuartigen Blindniete und Schließringbolzen";
Talk: 4. Landshuter Leichtbau Colloquium 2009,
Landhut;
2009-02-26
- 2009-02-27; in: "4. Landshuter Leichtbau Colloquium - 2009",
Leichtbau-Cluster Landshut,
4. Landshuter Leichtbau- Colloquium
(2009),
ISBN: 978-3-9812696-0-4;
18 pages.
-
N. Sotirov et al.:
"Laser welding of high-strength aluminium alloys for the sheet metal forming process";
Talk: ManuLight 2014, Int. Conference on Manufacture of Lightweight Components,
Dortmund;
2014-04-03
- 2014-04-04; in: "Procedia CIRP",
J. Enz et al. (ed.);
Procedia CIRP,
(2014),
ISSN: 2212-8271.
-
N. Sotirov, G. Falkinger, F. Grabner et al.:
"Improved Formablility of Aluminium Alloy Sheets at Cryogenic Temperatures";
Talk: MEFORM 2015,
Freiberg;
2014-03-25
- 2014-03-27; in: "Materials Science of Elsevier",
(2014).
-
N. Sotirov, M. Kumar, F. Grabner:
"Cryogenic to High Temperature Forming - Efforts to Increase the Formability of Aluminium Sheets";
Talk: Forming in Car Body Engineering,
Bad Nauheim;
2013-09-25
- 2013-09-26; in: "Forming in Car Body Engineering",
N. Sotirov, M. Kumar, F. Grabner (ed.);
(2013).
-
N. Sotirov, P. Simon, C. Chimani, D. Uffelmann, C. Melzer:
"Warm Deep Drawability of Peak-Aged 7075 Aluminium Sheet Alloy";
Talk: 15th ESAFORM CONFERENCE,
Erlangen (Deutschland);
2012-03-14
- 2012-03-16; in: "Warm Deep Drawability of Peak-Aged 7075 Aluminium Sheet Alloy",
Key Engineering Material,
504-506 / Schweiz
(2012),
ISSN: 1013-9826;
955
- 960.
More information
-
N. Sotirov, P. Simon, D. Uffelmann, C. Melzer, P. Dörner:
"Feasibility of high-strength 7xxx aluminium sheet components through warm forming";
Talk: IDDRG 2011,
Bilbao;
2011-06-05
- 2011-06-08; in: "IDDRG 2011",
(2011).
More information
-
N. Sotirov, P. Simon, T. Waltenberger, C. Melzer, D. Uffelmann:
"Erweiterte Einsatzmöglichkeiten von höchstfesten 7xxx-Aluminiumblechen für Leichtbaukomponenten durch Halbwarmumformen";
Talk: 30. EFB-Kolloquium Blechverarbeitung,
Bad Boll;
2010-03-02
- 2010-03-03; in: "T31",
(2010),
ISBN: 978-3-86776-343-1.
-
D. Stowe, J. Lee, S. Mu, S. Gneiger, C. Simson, A. Großalber, J. Österreicher:
"Revealing the distribution of lithium at the microscale";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07; in: "12. Ranshofener Leichtmetalltage",
1,
1
(2022),
22
- 27.
-
R. Thakkar, S. Ucsnik:
"Method to produce damage tolerant joints between metal and fiber reinforced thermoplast composites in a time efficient manner";
Talk: ECCM 16 European Conference on Composite Materials,
Sevilla;
2014-06-22
- 2014-06-26; in: "Proceedings of ECCM 16",
R. Thakkar, S. Ucsnik (ed.);
(2014).
-
S. Ucsnik et al.:
"Vergleich von Mischbau-Fügetechniken am Beispiel einer Metall-CFK-Lasteinleitung aus der Luftfahrt";
Talk: 7. Ranshofener Leichtmetalltage,
Gmunden (invited);
2012-11-07
- 2012-11-08; in: "7. Ranshofener Leichtmetalltage",
S. Ucsnik (ed.);
LKR-Verlag,
7
(2012),
84
- 98.
-
S. Ucsnik, R. Gradinger et al.:
"Composite to Composite Joint with Lightweight Metal Reinforcement for enhanced Damage Tolerance";
Talk: ECCM 16 European Conference on Composite Materials,
Sevilla;
2014-06-22
- 2014-06-26; in: "Proceedings of ECCM 16",
S. Ucsnik (ed.);
(2014).
-
S. Ucsnik, R. Gradinger et al.:
"Enhanced Performance ofn Steel-Aluminium Cast Nodes trough Cold Metal Transfer";
Talk: 6 th International Light Metals Technology Conference,
Old Windsor;
2013-07-24
- 2013-07-26; in: "Materials Science Forum",
Vol. 765
(2013),
736
- 740.
-
S. Ucsnik, A. Großalber, J. Reiter, M. Scheerer, G. Mozdzen:
"Advances in coninuous carbon fibre reinforced Aluminium matrix composites";
Talk: EUCASS 2019,
Madrid;
2019-07-01
- 2019-07-04; in: "Proceedings of 8th European conference for aeronautics and space sciences (EUCASS2019)",
783
(2019),
#
- ?.
-
S. Ucsnik, G. Kirov:
"New possibility for the connection of metal sheets and fibre reinforced plastics";
Keynote Lecture: 5th International Light Metal Technology Conference,
Lüneburg;
2011-07-19
- 2011-07-22; in: "5th International Light Metal Technology Conference",
(2011).
More information
-
S. Ucsnik, T. Staffenberger:
"Numerical model of a cylinder pin reinforces metal to composite single-lap shear";
Talk: ECCOMAS 2012,
Wien;
2012-09-10
- 2012-09-14; in: "ECCOMAS 2012",
S. Ucsnik, T. Staffenberger (ed.);
(2012).
-
S. Ucsnik, N. Stelzer:
"Novel Composite-Composite Joining Technology with Trough Thickness Reinforcement for Enhanced Damage Tolerance";
Talk: ICCM, 19th Int. Conference on Composite Materials,
Montreal;
2013-07-28
- 2013-08-02; in: "19th Int. Conference on Composite Materials",
S. Ucsnik, N. Stelzer (ed.);
(2013).
-
S. Ucsnik, S. Stelzer et al.:
"Fatigue behaviour of trough the tickness reinforced joints";
Talk: ECCM 16 European Conference on Composite Materials,
Sevilla;
2014-06-22
- 2014-06-26; in: "Proceedings of ECCM 16",
S. Stelzer (ed.);
(2014).
-
P. Uggowitzer, M. Cihova, D. Horwatitsch, T. Hametner, S. Pogatscher, D. Klaumünzer, J. Löffler:
"Designkonzepte für niedriglegierte hochfeste Magnesiumlegierungen";
Talk: 9. Ranshofner Leichtmetalltage,
Bad Ischl;
2016-11-09
- 2016-11-10; in: "Strategien für nachhaltige Entwicklungen im Leichtbau",
(2016),
109
- 122.
-
D. Vipavc, F. Grabner, M. Kumar, A. Kraly:
"Hot stamping process of aluminium 7xxx sheets, simulative investigation";
Keynote Lecture: Neuere Entwicklungen in der Blechumformung,
Stuttgart (invited);
2016-05-10
- 2016-05-11; in: "Neuere Entwicklungen in der Massivumformung / New Developments in Forging Technology",
(2016).
-
J. Voyer:
"Surface Wear Improvement of Al-Alloys by Amorphous Iron-Based Flame-Sprayed Coatings";
Keynote Lecture: 5th International Light Metal Technology Conference,
Lüneburg;
2011-07-19
- 2011-07-22; in: "5th International Light Metal Technology Conference",
C. Chimani (ed.);
(2011).
More information
-
H. Wabusseg, H. Kaufmann, P. Uggowitzer:
"Adaption of aluminium foundry alloys for New Rheocasting";
Talk: 6th International Conference on Semi-Solid Processing of Alloys and Composites,
Turin;
2000; in: "6th International Conference on Semi-Solid Processing of Alloys and Composites",
(2000),
777
- 782.
-
T. Waltenberger:
"Extrusion of Magnesium Alloys_Effect of Yttrium in MgZnZr";
Talk: Colloquium "Wrought Magnesium Alloys - Ressource efficient Production and Applications" - Freiberg 2012,
Freiberg (invited);
2012-06-03
- 2012-06-07; in: "Proceedings of Colloquium "Wrought Magnesium Alloys - Ressource efficient Production and Applications" - Freiberg 2012",
(2012),
#.
-
T. Waltenberger, C. Henkel, H. Lang, B. Kubicek:
"Enhanced precision in heat treatment of aluminium sheets and plates by simulation supported process design";
Talk: 11th International Conference on Aluminium Alloys (ICAA11),
Aachen, Deutschland;
2008-09-22
- 2008-09-26; in: "Aluminium Alloys: Their Physical and Mechanical Properties",
Wiley-VCH Verlag GmbH & Co KgaA,
Weinheim
(2008),
ISBN: 978-3-527-32367-8;
1211
- 1218.
-
T. Waltenberger, K.U. Schröder, M. Schagerl, M. Vetr:
"Mass and velocity scaling in the simulation of deep drawing processes using explicit solvers";
Talk: ECAA 2011,
Bremen;
2011-10-05
- 2011-10-07; in: "ECAA 2011, European Conference on Aluminium Alloys",
(2011).
More information
-
M. Weber, F. Graber, K. Schulmeister, H. Brusl, H. Hann, P. Kindl, P. Knuschke:
"Solare UV-Strahlungsbelastung einer ausgewählten Berufsgruppe";
Talk: Licht und Gesundheit 2006,
Berlin;
2006-02-23
- 2006-02-24; in: "Licht und Gesundheit 2006",
-,
Berlin
(2006),
3-9807635-0-2 -;
127
- 135.
-
M. Weber, K. Schulmeister, F. Graber, A. Uller, E. Kitz, H. Brusl, H. Hann, P. Kindl, P. Knuschke:
"UV-Belastung bei Arbeiten im Freien";
Talk: Sechstes Symposium "Licht und Gesundheit",
Berlin;
2008-03-13
- 2008-03-14; in: "Sechstes Symposium "Licht und Gesundheit"",
H. Kaase, F. Serick (ed.);
Berlin
(2008),
3-9807635-0-3;
30
- 55.
-
T. Weber, G. Waldenberger, T. Hametner, S. Wassertheurer, G. Lirk, O. Höglinger:
"Beetroot juice lowers central systolic blood pressure - a double-blind crossover placebo controlled pilot trial";
Poster: ESH - European Meeting on Hypertension and Cardiovascular Protection 2017,
Mailand;
2017-06-16
- 2017-06-19; in: "Journal of Hypertension",
Alberto Zanchetti, LWW, London,
Vol 35, e-Supplement 2
(2017),
ISSN: 1473-5598;
Paper ID e103,
1 pages.
-
O. Winter, S. Ucsnik, C. Kral, E. Schmidt:
"Ironless In-Wheel Hub Motor Design by Using Multi-Domain Finite Element Analyses";
Talk: SPEEDAM 2012,
Sorrento, Italien;
2012-06-20
- 2012-06-22; in: "2012 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM)",
EMD0125
(2012),
4 pages.
Talks and Poster Presentations (without Proceedings-Entry)
-
K. Anders, H. Kilian et al.:
"Entwicklung einer innovativen Prozessroute für PM-Aluminium-Motorenkomponenten am Beispiel eines Prototypenkonzeptes";
Talk: 33. Hagener Symposium Pulvermetallurgie 2014,
Hagen;
2014-11-27.
-
K. Anders, H. Kilian, R. Gradinger et al.:
"Entwicklung einer innovativen Prozessroute zur Herstellung von PM-Aluminium-Motorenkomponenten";
Talk: ASMET Fachausschuss Pulvermetallurgie,
Ranshofen;
2013-04-17.
-
C. Angermeier, A. Harrison, R. Kretz:
"Niederdruckguss von Magnesiumlegierungen als Rapid-Prototyping Verfahren";
Talk: VDI Spezialtag "Schnelle Produktentwicklung in der Gießereitechnik - Kernmacherei und angrenzende Verfahren",
Magdeburg (invited);
2015-02-12.
-
E. Ariza-Galván, L. Baca, M. Schnall, N. Stelzer, E. Neubauer, S. Ucsnik, Z. Ignjatov, L. Pambaguian:
"Development and manufacturing of AZ91 magnesium alloy large-size space components using Plasma Metal Deposition";
Talk: ESA 1st International Conference on AM,
2022-03-09.
-
E. Ariza-Galván, M. Schnall, N. Stelzer, E. Neubauer, L. Pambaguian:
"Study on processing magnesium ally AZ91 by Plasma Metal Deposition (PMD) for space applications";
Talk: EUROMAT 2021,
Graz;
2021-09-14.
-
A. Arnoldt:
"Along the process chain of Al-Zn-Mg-(Zr) alloys";
Poster: Konferenz: Junior Euromat 2018,
Budapest;
2018-07-08
- 2018-07-12.
-
A. Arnoldt:
"Hochfeste Aluminiumlegierungen der 7xxx-Serie für das Strangpressen von komplexen Hohlprofilen";
Poster: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03.
-
A. Arnoldt:
"Industrial homogenization of 7xxx AA for complex extrusion profiles";
Talk: LightMat 2021,
Online;
2021-11-02
- 2021-11-04.
-
A. Arnoldt, D. Horwatitsch, H. Kilian, J. Kronsteiner, M. Schnall:
"Extrusion at LKR";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
A. Arnoldt, J. Österreicher:
"Scanning Electron Microscopy at LKR";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
A. Arnoldt, A. Schiffl, S. Hovden, J. Österreicher, H. Höppel:
"Taylor-made high-performance AA7xxx for extrusion";
Talk: 17th International Conference on Aluminium Alloys,
Grenoble;
2020-10-26
- 2020-10-29.
-
A Betz, E. Neunteufl:
"Horizontale und Vertrikale Versuchsstranggießanlage";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
D. Blacher:
"Inspired by nature: A highly adaptive erosion/sedimentation approach to minimising turbulences in fluid flow";
Poster: AIT Poster Award,
Wien;
2018-05-17.
-
D. Blacher, S. Jäger:
"Physical shape optimization for a three-dimensional flow using a sedimentation - erosion model and the lattice Boltzmann method";
Talk: Konferenz EFMC12,
Wien;
2018-09-11.
-
S. Bozorgi:
"Microstructures and mechanical properties of Er modified AA7075 alloy";
Keynote Lecture: EuroMat 2019,
Stockholm;
2019-09-01
- 2019-09-05.
-
S. Bozorgi, K. Anders, C. Angermeier:
"Investigation on the energy absorption capacity of AlSiMg cast alloys for producing crash relevant automobile components";
Talk: Leichtbauworkshop IEA,
Schlatt (invited);
2014-10-09
- 2014-10-10.
-
A. Cerny, F. Grabner, M. Denk, G. Kunschert, J. Österreicher:
"Electrically assisted forming";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
More information
-
C. Chimani, M. Hartmann, Z. Khalil, P. Simon:
"Light Weight Design of AlMg Hybrid Space Frames for Urban E-Vehicles";
Keynote Lecture: 6th A3PS Conference "ECO-MOBILITY 2011",
Wien;
2011-11-15
- 2011-11-16.
-
M. Cihova, L. Hauser, R. Schäublin, D. Horwatitsch, T. Hametner, S. Pogatscher, P. Uggowitzer, J. Löffler:
"Design concept of hardenable magnesium-lean alloys processed by high-speed extrusion";
Talk: LightMAT 2017,
Bremen;
2017-11-08
- 2017-11-10.
-
H.P. Degischer, F. Feuchtenschlager:
"Spanende Bearbeitung von Aluminiummatrix-Verbundwerkstoffen";
Talk: Internationale Schweiß- und Fertigungstechnische Tagung,
Wien;
1998-05-14
- 1998-05-15.
-
H.P. Degischer, F. Feuchtenschlager:
"Zerspannung von MMC";
Talk: Seminar der Firma Norton Diamond Film,
Ceratonia, USA;
1998-10-06
- 1998-10-07.
-
H.P. Degischer, H. Kilian:
"Ko-Extrusion zur Herstellung von Verbundprofilen verschiedener Aluminiumwerkstoffe";
Talk: DGM-Symposium "Strangpressen",
Garmisch-Partenkirchen, Deutschland;
1998-10-09
- 1998-10-10.
-
H.P. Degischer, W. Kühlein:
"AIMgSi - Profile: Festigkeit und Biegefähigkeit für Automobilstrukturbauteile";
Talk: Praxis Forum: Das Al-Automobil,
Bad Naumheim, Deutschland;
1998-06-17
- 1998-06-18.
-
H.P. Degischer, P. Prader, H. Kilian:
"Defekte in stranggepreßten teilchenverstärktem Aluminium und die Streuung der Eigenschaften";
1999.
-
M. Duancheng:
"Alpha-phase in engineering aluminum alloys: a multiscale modeling approach to its mechanical behavior";
Poster: 9th International Conference on Multiscale Materials Modeling,
Osaka, Japan;
2018-10-28
- 2018-11-02.
-
M. Duancheng:
"Assessment of formability limit diagram prediction by crystal plasticity finite element method";
Talk: 9th International Conference on Multiscale Materials Modeling,
Osaka, Japan;
2018-10-28
- 2018-11-02.
-
M. Duancheng:
"Crystal plasticity finite element method calculation of formability limit diagram";
Talk: Materials Science and Engineering 2018 (MSE),
Darmstadt, Deutschland;
2018-09-26
- 2018-09-28.
-
M. Duancheng:
"Elastic properties of alpha-phase in engineering aluminium alloys: an ab-initio study";
Talk: Materials Science and Engineering 2018 (MSE),
Darmstadt, Deutschland;
2018-09-26
- 2018-09-28.
-
M. Duancheng:
"Incorporating DAMASK into LS-Dyna and its application to simulating formability limit diagrams";
Talk: 6th International Symposium on Computational Mechanics of Polycrystals, CMCn 2018 and DAMASK User Meeting,
Düsseldorf, Deutschland;
2018-09-17
- 2018-09-19.
-
M. Duancheng:
"Modelling formability limit diagram prediction by crystal plasticity finite element method";
Talk: International conference on plasticitiy, damage and fracture,
Panama;
2019-01-03
- 2019-01-09.
-
A. Elrefaei:
"Characterization of robotic cold metal transfer welded 5182 and 6082 aluminium alloys";
Talk: Materials Science and Engineering Congress,
Darmstadt;
2014-09-23
- 2014-09-25.
-
G. Falkinger:
"An investigation of modelling appraches for material instability of aluminium sheet metal using the GISSMO-model";
Talk: LS-Dyna European Conference 2015,
Würzburg;
2015-06-15
- 2015-06-17.
-
G. Falkinger, F. Grabner et al.:
"Material characterization and modelling methods for the cryogenic forming of aluminium alloys";
Talk: 13. LS-Dyna Forum,
Bamberg;
2014-10-06
- 2014-10-07.
-
S. Frank:
"Casting Technologies Light Metal Technologies Ranshofen";
Talk: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
S. Frank, C. Chimani, T. Röth, M. Luigi, K. Radlmayr, K. Koglin:
"MegaCasting - Intelligent Sustainable Lightweight Design? A Dispute between experts.";
Talk: Automotive cycle - car body parts,
2022-09-27
- 2022-09-29.
-
S. Frank, S. Gneiger, A. Harrison:
"Magnesium (Druckguss) am LKR Ranshofen";
Talk: Arbeitskreis Magnesiumdruckguss des Bundesverband der Deutschen Gießerei-Industrie,
Düsseldorf - Online (invited);
2020-10-27.
-
S. Frank, S. Gneiger, E. Neunteufl, M. Schnall, A. Birgmann, S. Ucsnik, R. Gradinger, C. Chimani:
"Wire Based Additive Manufacturing of Al- and Mg-alloys";
Keynote Lecture: 9th International Light Metals Technology Conference,
Shanghai (invited);
2019-10-15
- 2019-10-18.
-
S. Frank, S. Gneiger, E. Neunteufl, M. Schnall, A. Birgmann, S. Ucsnik, R. Gradinger, C. Chimani:
"Wire Based Additive Manufacturing of Al- and Mg-alloys";
Talk: Eco-Mobility 2019 - 14th International A3PS Conference,
Wien;
2019-11-14
- 2019-11-15.
-
S. Frank, A. Harrison, R. Gradinger, C. Zauner:
"Druckguss, Additive Fertigung von Werkzeugen, kontournahes Kühlen";
Talk: Euroguss Nürnberg SpeakersCorner "AM4Casting",
Nürnberg;
2020-01-14
- 2020-01-16.
-
S. Frank, A. Harrison, L. Kiessling, R. Burgstaller, R. Rapp:
"Dosiersysteme der nächsten Generation für die Strukturbauteile der Zukunft";
Talk: 21. Druckgusstag (Euroguss 2022),
2022-06-08
- 2022-06-10.
-
S. Frank, A. Harrison, J. Roither:
"Druckguss am Leichtmetallkompetenzzentrum Ranshofen (LKR): Konturnahe Kühlung mit generativ gefertigten Werkzeugeinsätzen für Strukturbauteile";
Talk: Plenarsitzung des Fachausschusses "Druckguss" - Bundesverband der Deutschen Gießerei-Industrie Fachgruppe NE-Metallguss / Gruppe Feinguss,
Schorndorf;
2019-02-25.
-
S. Frank, A. Harrison, C. Zauner:
"Auf dem Weg zur grünen Gießerei der Zukunft - Digitalisierung und Energieeffizienzmaßnahmen als Beitrag zur Dekarbonisierung";
Talk: Fachausschuss "Leichtmetall-, Sand- und Kokillenguss" sowie "Druckguss" Bundesverband der Deutschen Gießerei-Industrie,
Online (invited);
2021-03-24.
-
S. Frank, E. Neunteufl, S. Gneiger, A Betz:
"Leichtbau-Entwicklungen / Tendenzen";
Talk: 7. Joinventure Leichtbau-Workshop,
Unterschleißheim / München (invited);
2019-07-22
- 2019-07-23.
-
S. Frank, J. Roither, A. Harrison, A Betz, S. Bozorgi:
"Druckguss am LKR";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
R. Fröschl, H. Zemann, M. Kettner:
"System zur Online-Messung von ultraschallinduzierter Kavitation in Leichtmetallschmelzen";
Talk: 4. Ranshofener Leichtmetalltage,
Salzburg;
2006-10-17
- 2006-10-18.
More information
-
U. Galovsky, R. Kretz:
"Manufacturing of large size aluminium foam net shape parts for automotive applications";
Talk: ISATA 99,
Wien;
1999-06-14
- 1999-06-16.
-
S. Gneiger, S. Frank:
"Brandbeständige Magnesiumlegierungen";
Poster: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14.
-
S. Gneiger, S. Frank, N. Papenberg, A Betz:
"Brandbeständige Magnesiumlegierungen für Automobil und Luftfahrt";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
S. Gneiger, D. Koutny, S. Senck:
"ReMaP: Research of Magnesium Alloys for Additive Manufacturing of Structural and Biocompatible Parts";
Poster: Eco-Mobility 2021 - 15 Years A3PS,
2021-11-18
- 2021-11-19.
-
S. Gneiger, N. Papenberg:
"Hochfeste Mg-Ca-Legierungen für Umformanwendungen";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
-
S. Gneiger, N. Papenberg:
"Projekt Pro-Imagine: Process routes for improved magnesium wrought parts in Europe";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
-
S. Gneiger, N. Papenberg, A. Arnoldt, C. Schlögl, M. Fehlbier:
"High-Strength Mg-Al-Ca Alloys for Wrought Applications";
Talk: 78th IMA Annual IMA World Magnesium Conference,
Online;
2021-08-23
- 2021-08-27.
-
S. Gneiger, N. Papenberg, A. Arnoldt, C. Schlögl, M. Fehlbier:
"Hochfeste Mg-Ca-Legierungen für Umformanwendungen";
Talk: 28. Magnesium Automotive- and User Seminar,
2022-09-26.
-
S. Gneiger, N. Papenberg, S. Frank:
"Von der Anforderung zur Anwendung - modernes Legierungsdesign für Magnesiumbauteile";
Talk: 70. BHT - Freiberger Universitätsforum,
Freiberg (invited);
2019-06-05
- 2019-06-07.
-
S. Gneiger, M. Schnall, T. Klein:
"Process and Alloy Development for Additive Manufacturing of Mg";
Talk: IMA Webinar: 3D Metal Printing - Opportunities for Magnesium,
Online (invited);
2021-03-23.
-
F. Grabner, C. Schlögl, A. Kraly:
"Prozessoptimierung für die Kryogene Blechumformung";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
R. Gradinger:
"10 Jahre Luftfahrtforschung Entwicklungen - Nutzen - Herausforderungen";
Talk: Ergebnis- und Vernetzungsveranstaltung Take Off,
Wien (invited);
2013-11-21.
-
R. Gradinger:
"Aluminium fuselage design with modern Aluminium alloys";
Talk: Workshop Aerospace Engineering der FH Wien,
Wien (invited);
2013-11-22.
-
R. Gradinger:
"Beispiele zum Technologietransfer im Bereich Luftfahrt";
Talk: Take off Informationsveranstaltung zur Ausschreibung 2013,
Wien (invited);
2013-06-05.
-
R. Gradinger:
"Innovative Fügeverfahren für Leichtmetalle im Materialmix";
Talk: Seminar Fügetechnik - Sonderfügeverfahren für Leichtmetalle & Leichtbau,
Ranshofen;
2010-10-28.
-
R. Gradinger:
"Light Weight Structures and Light Metals for New Electric Vehicles";
Talk: Conference on Alternative Propulsion Systems and Energy Carriers,
TechGate Wien;
2009-10-16.
-
R. Gradinger:
"Mg- Potentiale in der Luftfahrtindustrie";
Talk: INNOVMAT | academy workshop: "Magnesium",
Wiener Neustadt (invited);
2012-01-26.
-
R. Gradinger, D. Horwatitsch, E. Berhuber, J. Kneissl, P. Uttenthaler, E. Reiss, F. Obermair, A. Merstallinger:
"Integrated optimization of titanium machining";
Talk: Proceedings of the Light Metals Technology Conference 2007,
*;
2007.
-
R. Gradinger, H. Kilian, R. Schuller, P. Schäffler:
"'Weight reduction of high performance helicopter lubrication pumps by PM aluminium alloys";
Talk: 5th Int. Conference "Supply on the wings", Session B3b,
Frankfurt (invited);
2010-11-03
- 2010-11-04.
-
R. Gradinger, M. Schnall, P. Morais, S. Bozorgi, A. Cabral, M. Gomes, P. Santos, J. Sousa, J. Santos, B. Gomes, D. Fleischhacker, P. Warczok, A. Falahati:
"Recent Developments of light alloy precursor material for additively manufacturd ultra-lightweight parts";
Talk: Metal Additive Manufacturing Conference 2018,
Wien (invited);
2018-11-21
- 2018-11-23.
-
R. Gradinger, S. Ucsnik:
"Evaluation of A Novel Lightweight Metal-Composite-Joint Technology";
Talk: European Conference On Composite Materials,
Budapest (Ungarn);
2010-06-07
- 2010-06-10.
-
R. Gradinger, S. Ucsnik:
"FEM-basierte Untersuchungen einer innovativen Metall-FVK-Fügetechnik";
Talk: Multimaterialsysteme und hybride Leichtbaulösungen,
München (invited);
2010-11-09.
-
R. Gradinger, S. Ucsnik, A. Harrison:
"Reinforcement of metallic and hybrid bonds by welded metal pins";
Talk: IABC 2012,
Frankfurt (invited);
2012-05-09
- 2012-05-10.
-
G. Graf, T. Klein, E. Maawad, M. Burtscher, D. Kiener, H. Clemens, P. Spoerk:
"Effect of the wire and arc additive manufacturing process on microstructure and aging behavior of a magnesium alloy studied by HEXRD";
Poster: NESY Symposium,
2022-09-29
- 2022-09-30.
-
G. Graf, P. Spoerk, P. Staron, A. Stark, H. Clemens, T. Klein:
"In situ SAXS and HEXRD investigation of the quench rate sensitivity of an Al-Mg-Zn-Cu alloy developed for wire and arc additive manufacturing";
Talk: Materials Science Colloquium 2022,
2022-04-19
- 2022-04-22.
-
G. Graf, P. Spörk-Erdely, P. Staron, A. Stark, H. Clemens, T. Klein:
"In situ SAXS and HEXRD investigation of the quench rate sensitivity of an Al-Mg-Zn-Cu alloy developed for wire and arc additive manufacturing";
Talk: 18th International Conference on Aluminium Alloys,
2022-09-04
- 2022-09-08.
More information
-
B. Gruber, F. Grabner, T. Kremmer, S. Kirnstötter, R. Schneider, R. Schäublin, S. Zaefferer, D. Raabe, P. Uggowitzer, S. Pogatscher:
"Improved formability of aluminium alloys at low temperatures for automotive applications";
Talk: LightMAT 2017,
Bremen;
2017-11-08
- 2017-11-10.
-
B. Gruber, F. Grabner, T. Kremmer, S. Kirnstötter, R. Schneider, P. Uggowitzer, S. Pogatscher:
"Cryogenic formability of aluminium alloys for automotive applications";
Talk: European Aluminium Congress,
Düsseldorf;
2017-11-27
- 2017-11-28.
-
H. Grün-Lutterotti, F. Grabner, C. Schlögl:
"KryoAlu - Kryogene Umformung von Aluminium-Außenhautbauteilen für automobile Anwendungen";
Talk: Forum mission.innovation,
Wien;
2018-06-13.
-
J. Gumpinger, C. Chimani, R. Gradinger:
"Carbon versus Aluminium: A competition between light weight Materials?";
Talk: TRA 2014,
Paris (invited);
2014-04-14
- 2014-04-17.
-
A. Harrison, S. Frank, C. Zauner:
"Simulation of Conformal Cooling Channels";
Talk: NovaFlow & Solid User Meeting,
Online (invited);
2021-04-15.
-
M. Hartmann:
"SmartBatt - Smart and Safe Integration of Batteries in Electric Vehicles";
Talk: Electric Vehicle Symposium 27,
Barcelona (invited);
2013-11-20
- 2013-11-24.
-
M. Hartmann, M. Roschitz, A. Horr et al.:
"Development of a unit cell model for structural metal sheets using constrained multiple global";
Talk: 13. LS-Dyna Forum,
Bamberg;
2014-10-06
- 2014-10-07.
-
M. Hofbauer, A. Ott, A. Arnoldt, J. Nietsch, M. Denk, A. Cerny, C. Schlögl:
"Application of artificial intelligence in the field of metal forming at the LKR";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
More information
-
D. Hohm, R. Gradinger:
"Integration of electrical conductors into light metall";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
More information
-
A. Horr:
"Advanced Simulation Technology for Material Strength and Fatigue Life of Highway Structures";
Talk: Euromat 2013,
Sevilla;
2013-09-08
- 2013-09-13.
-
A. Horr:
"Al-Based Hybrid Framework for Material Processes - Casting Process";
Talk: MSE 2020 - Materials Science and Engineering,
Web-based Congress (invited);
2020-09-22
- 2020-09-25.
-
A. Horr:
"Designing Future Mobility - Application of Multi-Scaling Techniques in a Multi-Physical Process Modelling";
Talk: EARPA Spring 2015 Session - Modelling & Simulation TF,
Brüssel (invited);
2015-03-17
- 2015-03-18.
-
A. Horr:
"European Commission Material Ontology Meeting";
Talk: European Commision Building,
Brüssel (invited);
2018-07-29.
-
A. Horr:
"Hybrid and ML-Assisted Methods for Digitalization of Material Processes";
Talk: Online Colloquium Materials Modelling - IMWF, University of Stuttgart,
2022-05-12.
-
A. Horr:
"Process simulations and their future - casting, forming, 3D printing and mechanical simulations";
Poster: Industrial Workshop Advanced Materials Modelling for Industrial Practice,
Graz;
2015-01-30.
-
A. Horr:
"Simulation of buffeting-induced vibrations using CFD grid to grid technology";
Talk: 4th International Conference on Dynamics Simulation in Vehicle Engineering,
St. Valentin;
2016-04-28
- 2016-04-29.
-
A. Horr:
"Towards Bridging & Translation for lightweight material modelling I - Casting";
Poster: Europeam Material Modelling Council,
Wien (invited);
2019-02-25
- 2019-02-27.
-
A. Horr, E. Kabliman:
"Process-oriented ICME Framework for Lightweight Alloys";
Poster: 1. International Workshop of European Materials Modelling Council,
Wien;
2017-04-05
- 2017-04-07.
-
D. Horwatitsch:
"Transnational funding acitivies - Take off";
Talk: Final project meeting ERA-Net "AirTN",
Bonn;
2013-12-11.
-
D. Horwatitsch, R. Gradinger, Reiss:
"Virtuelle Werkzeugentwicklung für Titanzerspanungswerkzeuge";
Talk: CENITSimulation Days - DEFORM Machining Workshop,
Stuttgart;
2019-05-23.
-
D. Horwatitsch, J. Kronsteiner, J. Müller, A. Wahlen:
"Transiente und stationäre Simulation des Strangpressens von Aluminiumlegierungen";
Talk: DEFORM Users Meeting 2016,
Salzburg;
2016-01-21.
-
D. Horwatitsch, A. Merstallinger:
"Prozessoptimierung stark reibungsbehafteter Formgebungsverfahren für Werkzeuge mittels Simulationsmethoden";
Talk: Spritzgießwerkzeuge - Technologien & Trends für optisch hochwertige und funktionelle Kunststoffanteile,
St. Pölten;
2011-09-22.
-
D. Horwatitsch, G. Mozdzen, A. Merstallinger, R. Gradinger, U. Noster, K. Steinhoff:
"Ermittlung der Reibung zur Verwendung in einer FE-basierten Prozesssimulation eines Zerspannungsprozesses";
Talk: ÖTG Symposium 2007,
St. Pölten;
2007.
-
D. Horwatitsch, N. Papenberg:
"Umformen von Leichtmetallen: Schmieden am LKR";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
D. Horwatitsch, E. Reiss:
"Werkzeugentwicklung für hochwirtschaftliche Titanzerspanung";
Talk: DERFORM Users Group Meeting 2010,
München;
2010-11-19.
-
S. Jäger:
"Multi-scale microstructure simulation for high-quality metal materials";
Poster: AIT Poster Award,
Wien;
2019-06-01.
-
S. Jäger:
"Raising grains for lightweight materials";
Talk: EARPA FORM Forum,
Brüssel;
2018-10-17.
-
S. Jäger:
"Vorhersage der Mikrostruktur während der Erstarrung";
Poster: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03.
-
S. Jäger, D. Blacher, M. Harasek:
"Physical shape optimisation in fluid flow using lattice Boltzmann Method";
Talk: 7th European Conference in Computational Fluid Dynamics ECFD7,
Glasgow;
2018-06-11
- 2018-06-15.
-
E. Kabliman:
"Modelling of microstructure evolution in aluminum alloys during thermo-mechanical processing";
Talk: Department of Materials Physics at the Eötvös Loránd University,
Budapest (invited);
2017-10-17.
-
E. Kabliman, S. Bozorgi, A. Nikolas:
"Development of Al-Mg-Sc Thin Foils for Use in Fibre-Reinforced Metal Laminates";
Talk: LightMAT 2017,
Bremen;
2017-11-08
- 2017-11-10.
-
E. Kabliman, A. Kolody, J. Kronsteiner, M. Kommenda, G. Kronberger:
"Von werkstoffbasierter Prozesssimulation zum Digitalen Zwilling";
Talk: 3. Werkstoffwoche Kongress & Fachmesse,
Desden;
2019-09-18
- 2019-09-20.
-
E. Kabliman, J. Kronsteiner:
"Towards Bridging & Translation for lightweight material modelling II - Hot deformation";
Poster: Europeam Material Modelling Council,
Wien;
2019-02-25
- 2019-02-27.
-
E. Kabliman, J. Kronsteiner, A. Kolody:
"Automatic analysis and numerical prediction of flow stress curves for aluminium alloys";
Poster: 9th International Conference on Multiscale Materials Modeling,
Osaka, Japan;
2018-10-28
- 2018-11-02.
-
E. Kabliman, J. Kronsteiner, M. Kommenda, G. Kronberger:
"Parameter optimization for a physics-based model of material plastic behavior using machine learning";
Talk: MSE 2020 - Materials Science and Engineering,
Web-based Congress;
2020-09-22
- 2020-09-25.
-
E. Kabliman, J. Kronsteiner, E. Kozeschnik:
"Strong coupling of deformation and microstructure/microchemistry evolution in hot compression tests";
Talk: 9th International Conference on Multiscale Materials Modeling,
Osaka, Japan;
2018-10-28
- 2018-11-02.
-
H. Kaufmann:
"Leichtbau-Initiative: K1-Zentrum für Leichtbau und innovative Werkstoffe";
Talk: Industrie-Forum "Forschung & Entwicklung";,
ARC;
2006-10.
-
H. Kaufmann, P. Schulz:
"Untersuchung zum Füllverhalten keramischer Faservorformen mit ALuminium bei isothermer Gasdruckinfiltration";
Talk: DGM Tagung-Strangpressausschuss,
München, Deutschland;
1998-11-04.
-
G. Kirov:
"7. Internationale Klebefachtagung";
Talk: 7. Internationale Klebefachtagung,
Wr. Neustadt;
2013-10-24.
-
G. Kirov, A. Birgmann:
"Heat assisted self pierce riveting for high strength light metal alloys";
Talk: EUROMAT 2017,
Thessaloniki;
2017-09-17
- 2017-09-22.
-
G. Kirov, A. Birgmann:
"Novel Heat assisted self pierce riveting process for high strength light metal alloys joining";
Poster: 10. Ranshofener Leichtmetalltage,
Linz (invited);
2018-06-13
- 2018-06-14.
-
G. Kirov, F. Grabner et al.:
"Numerical and experimental investigating on adhesive joint parts for crash condition";
Talk: 13. LS-Dyna Forum,
Bamberg;
2014-10-06
- 2014-10-07.
-
T. Klein:
"A hypoeutectic Al-Ni-Mg in situ composite processed by wire-arc additive manufacturing: Phase evolution and mechanical behavior";
Talk: MSE 2022,
2022-09-27
- 2022-09-29.
More information
-
T. Klein:
"Wire-arc additive manufacturing with high-quality Al-Zn5.5-Mg-Cu wires (ML7075)";
Talk: 1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation & Exhibition,
2022-03-07
- 2022-03-11.
-
T. Klein, S. Gneiger, A. Arnoldt, A. Birgmann, M. Schnall:
"Aspects of alloy development of light-metals for wire-arc additive manufacturing: From alloy design to demonstration";
Talk: MaterialsWeek 2021,
Online (invited);
2021-09-07
- 2021-09-09.
-
T. Klein, A. Großalber, S. Hoque, M. Schnall, W. Fragner:
"Development strategies for advanced light-metal feedstock wires for wire-based additive manufacturing";
Talk: International Conference on Advanced Joining Processes 2021,
Sintra;
2021-10-21
- 2021-10-22.
-
T. Klein, M. Schnall, R. Gradinger, S. Ucsnik:
"An Advanced High-Performance Aluminium Alloy Designed for Wire-Arc Additive Manufacturing";
Talk: TMS2022 Annual Meeting & Exhibition,
2022-02-27
- 2022-03-04.
-
T. Klein, M. Schnall, S. Ucsnik:
"wire-based additive manufacturing (waam)";
Talk: ADDKON 2019,
St. Wolfgang (invited);
2019-06-06
- 2019-06-07.
-
T. Klein, M. Schnall, S. Ucsnik:
"Wire-based additive manufacturing of an advance age-hardenable Al-Mg-Zn-Cu alloy";
Keynote Lecture: EUROMAT 2021,
Online;
2021-09-13
- 2021-09-17.
-
T. Klein, Y. Shan, C. Simson, N. Enzinger, M. Stockinger, E. Kozeschnik:
"Microstructure evolution during processing and heat treatment of an Al-7Mg-3Si-1.5Zn-Mn alloy for wire-arc additive manufacturing";
Talk: Alloys for Additive Manufacturing Symposium 2022,
2022-09-12
- 2022-09-14.
More information
-
T. Klein, C. Simson, J. Niedermayer, B. Gludovatz:
"Functionally-graded materials and complex alloy systems though wire-arc additive manufacturing";
Talk: 2nd Advanced Materials Science Congress 2021,
online (invited);
2021-06-14
- 2021-06-15.
-
S. Knopp, R. Gradinger, D. Horwatitsch, H. Koller, J. Zajicek:
"Inventory Routing for Avoiding Aluminum Alloy Downcycling";
Talk: ROADEF 2018,
Lorient, Frankreich;
2018-02-21.
-
R. Kretz:
"Development and Processing of New Magnesium Wrought Alloys";
Talk: Magnesium Abnehmer- und Automotive Seminar,
Düsseldorf;
2012-10-08.
-
R. Kretz:
"Herstellung von Schaumaluminium-Formteilen";
Talk: Leichtbau von Automobilkarosserien Tagung,
Haus der Technik, Essen;
1999-10-28
- 1999-10-29.
-
R. Kretz:
"Magnesium Alloys for Biomedical Applications";
Talk: 21. Magnesium Abnehmer- und Automotive Seminar,
Aalen;
2013-10-01
- 2013-10-02.
-
R. Kretz:
"Neue Leichtmetallwerkstoffe Schaumaluminium und Metallmatrix-Verbundwerkstoffe";
Talk: BULTHAUP Info - Forum neue Werkstoffe,
Aich (Bayern);
1998-10-28.
-
R. Kretz:
"Schaumaluminium - Entwicklung und Prototypen von LKR";
Talk: Seminar - Metallschäume,
Wien, Technische Universität;
1998-11-06.
-
R. Kretz:
"Thixo-Extrusion von Magnesium Chips";
Talk: DGM Tagung-Strangpressausschuss,
Essen;
2015-09-23.
-
R. Kretz, H. Kaufmann:
"Fabrication of Squeeze Castings with Permanent Aluminium Foam Cores";
Talk: EUROMAT 99,
München;
1999-09-27
- 1999-09-30.
-
B. Kriszt, R. Gradinger, B. Zettl:
"Untersuchung von Aluminiumschaum, im speziellen der mechanischen Eigenschaften";
Talk: DVM Tagung,
Bad Nauheim, Deutschland;
1998-12-01
- 1998-12-03.
-
J. Kronsteiner:
"Advanced numerical methods and mesh manipulation strategies for large deformation processes";
Talk: OEWGP Herbsttagung 2021,
Linz (invited);
2021-10-28.
-
J. Kronsteiner:
"Forming simulation based on grain growth history";
Poster: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03.
-
J. Kronsteiner, D. Horwatitsch, H. Kilian:
"Wie kann numerische Simulation die indus-trielle Prozessentwicklung unterstützen?";
Talk: DGM Fachausschuss Strangpressen,
Bad Nenndorf;
2018-09-13
- 2018-09-14.
-
J. Kronsteiner, S. Jäger, E. Kabliman:
"Linking of Cellular Automaton for simulating grain growth to metal extrusion";
Talk: ICAA17,
Grenoble - Online;
2020-10-26
- 2020-10-29.
-
J. Kronsteiner, A. Kolody, S. Brötz, S. Jäger, D. Blacher, B. Pruckner, A. Horr, E. Kabliman:
"Werkstoff- und Gefügemodellierung";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
M. Kumar, R. Nissinen, J. van Elsas, A. Sessitsch, L. Antonielli:
"Biogeographical diversity of root associated microbial communities in arctic and alpine tundra plants";
Talk: Rhizosphere 2004,
Maastricht, NL;
2015-06-21
- 2015-06-25.
-
G. Kunschert, J. Österreicher, J. Nietsch, A. Cerny, C. Schlögl:
"Pushing the Limits of the Al-Mg-Si System: A Systematic Rolling and Extrusion Study of Ultra-High-Strength Alloys";
Talk: ICAA18,
2022-09-05
- 2022-09-08.
More information
-
F. Magner, C. Schneider-Bröskamp:
"Alloy development of AL 6082 welding wire";
Poster: 12. Ranshofener Leichtmetalltage,
2017-04-27
- 2017-04-28.
-
P. Morais, R. Gradinger:
"Preparation of Al-based alloys and characterisation of wire-arc additive manufacturing parts";
Talk: Clean Sky 2 Workshop on Additive Manufacturing,
Aachen (invited);
2019-01-23.
-
C. Mühlstätter:
"Calibration and Appliance of the Wilkins Damage Model on cast Aluminium";
Talk: 14. deutsches LS-DYNA Forum,
Bamberg;
2016-10-10
- 2016-10-12.
-
C. Mühlstätter:
"Material modelling of cast Aluminium by application of the Wilkins Damage Model";
Talk: ECCOMAS2016,
Kreta;
2016-06-05
- 2016-06-10.
-
U. Noster:
"Entwicklung von Leichtmetall Space Frame-Strukturen für alternative Fahrzeugkonzepte";
Talk: AC Branchenfokus,
Ranshofen;
2009-03-03.
-
J. Österreicher:
"Combined Cyclic Deformation and Artificial Ageing of an Al-Mg-Si Alloy";
Poster: ICAA18,
2022-09-05.
More information
-
J. Österreicher:
"Forming Technologies Light Metal Technologies Ranshofen";
Talk: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
J. Österreicher:
"Information depth in backscattered scanning electron microscopy";
Keynote Lecture: 15th International Congress for Stereology and Image Analysis - ICSIA 2019,
Aarhus;
2019-05-27
- 2019-05-30.
-
J. Österreicher:
"Quantification of nanoparticles within a solid matrix by transmission and scanning electron microscopy";
Talk: MATERIAIS 2019,
Lissabon;
2019-04-14
- 2019-04-17.
-
J. Österreicher:
"Stabilization Heat Treatments of 7000 Series Alloys for Improved Processability";
Talk: 16th International Conference on Aluminium Alloys,
Montreal, CA;
2018-06-18
- 2018-06-21.
-
J. Österreicher, S. Gneiger, C. Simson, A. Großalber, S. Mu, J. Lee, D. Stowe:
"Quantitative mapping of lithium in the scanning electron microscope using composition by difference method";
Poster: Microscopy & Microanalysis 2021,
online;
2021-08-01
- 2021-08-05.
-
J. Österreicher, M. Kumar:
"Long-term stability and applications of pre-aged 7xxx series sheet";
Talk: LightMat 2019,
Manchester;
2019-11-05
- 2019-11-07.
-
N. Papenberg:
"Forming of Mg-Al-Ca Alloys - An Introduction to the Processing and Forming Behavior of Mg Wrought Alloys";
Talk: EUROMAT 2021,
Online;
2021-09-13
- 2021-09-17.
-
N. Papenberg, S. Gneiger:
"Forging of flame resistant magnesium alloys";
Poster: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
N. Papenberg, F. Graber:
"From Concept to Component: Material & Process Development on the Example of a Mg-Al-Ca Alloy";
Poster: 11. Ranshofener Leichtmetalltage Digital,
Digital;
2020-09-03.
-
N. Papenberg, J. Österreicher:
"Prediction of Mechanical Properties of Al-Mg-Si Alloys Based on Microstructural Parameters";
Talk: LightMAT 2017,
Bremen;
2017-11-08
- 2017-11-10.
More information
-
N. Papenberg, S. Pogatscher, P. Uggowitzer:
"Introduction to Magnesium Wrought Alloys with Low Alloying Content";
Talk: IMA Conference Webinar Series 2020,
Online (invited);
2020-10-20
- 2020-10-22.
-
V. Pfaffinger, E. Staufer, C. Edtmaier, M. Schmitz-Nieder, J. Horky, T. Klein:
"Effect of Fe and Cr on a eutectoid Ti-6.4Ni alloy developed for wire-arc additive manufacturing";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
-
D. Pöschmann:
"Charakterisierung des Bruchverhaltens von warmumgeformten Gefügen der Aluminiumlegierung 7050 mittels minaturisierten Kerbschlagversuches";
Talk: Werkstoffprüfung 2012,
Bad Neuenahr;
2012-12-06
- 2012-12-07.
-
F. Pravdic, K. Helmut, M. Brandecker, C. Wögerer, G. Traxler:
"The Gain Size Evolution of AZ31 Profiles as Function of Different Casting Conditions";
Talk: International Conference on Magnesium - Science Technology and Application,
Beijing, Cina;
2004-09-20
- 2004-09-24.
-
A. Rauscher:
"Carbon fibre reinforced aluminium MMC with advanced geometries and layups";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
-
C. Reichl, R. Schneider, W. Hohenauer, F. Grabner, R. Grant:
"Numerical and Experimental Techniques in Cryogenic Metal Forming";
Talk: 24th Ercoftac ADA Pilot Center Meeting,
Linz;
2016-11-11.
-
S. Scheiblhofer:
"CFRP layup optimisation to reduce resulting distortions of RTM-produced hybrid steel-CFRP plates";
Talk: EngOpt2018 6th International Conference on Engineering Optimization,
Lissabon;
2018-09-17
- 2018-09-19.
-
S. Scheiblhofer, S. Jäger, J. Kronsteiner, C. Mühlstätter, A. Horr:
"Strangguss Prozesssimulation";
Poster: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14.
-
A. Schiffl, J. Österreicher:
"Identification of the most influencing parameter for perfect";
Talk: International Aluminum Extrusion Technology Seminar,
Chicago;
2016-05-06.
-
A. Schiffl, J. Österreicher, I. Schiffl:
"Identification of the most influencing parameter for perfect extrudability of high strength 6082";
Talk: ET 2016 Aluminium Extruders Council,
Chicago;
2016-05-02
- 2016-05-06.
-
C. Schlögl, C. Chimani:
"Innovative Lightweight Construction - an important contribution to zero-emission mobility of the future";
Talk: Eco-Mobility 2021 - 15 Years A3PS,
2021-11-18
- 2021-11-19.
-
C. Schlögl, D. Horwatitsch, J. Zajicek:
"Recycling von Aluminium(spänen)";
Talk: Workshop Logistics Research Austria,
2022-06-20.
-
C. Schlögl, A. Kolody, A. Arnoldt, F. Grabner:
"Prozessoptimierung für die kryogene Blechumformung";
Poster: 10. Ranshofener Leichtmetalltage,
Linz;
2018-06-13
- 2018-06-14.
-
C. Schlögl, N. Papenberg, S. Gneiger, E. Neunteufl, S. Frank:
"Development and application of Mg lean alloys in semi-industrial processing";
Talk: 75th International Magnesium Conferenze (IMA),
New Orleans, USA;
2018-05-16
- 2018-05-18.
-
M. Schnall:
"Einfluss verschiedener Prozessgase auf die drahtbasierte additive Fertigung der Aluminiumlegierung AlMg4,5Mn";
accepted as poster for: ASMET 2022,
2009-05-12.
-
M. Schnall, I. Gudeljevic, A. Birgmann, S. Ucsnik, T. Klein:
"Brennervergleichsstudien des Wire-based additive manufacturing - Prozesses an AlMg (5xxx)- und AlZnMgCu (7xxx)-Legierungen";
Talk: DVS Congress 2021,
Essen;
2021-09-14
- 2021-09-17.
-
M. Schnall, M. Hartmann:
"Auf dem Weg zum automatisierten WAAM - von der Simulation bis zum sensorgestützten Prozess";
Talk: Praxisforum 3D-Druck,
2022-11-03.
-
C. Schneider-Bröskamp, M. Schnall, A. Birgmann, S. Ucsnik:
"Generation and characterization of new "spike-head" aluminium pins for ultra-lightweight aluminium-CFRP joints";
Talk: 1st Internationcal Conference on Advanced Manufacturing for Air, Space and Land Transportation,
2022-03-07
- 2022-03-10.
-
C. Schneider-Bröskamp, M. Silmbroth, T. Klein:
"Microstructure and mechanical properties of wire arc additive manufactured aluminum AA2024";
Talk: IIW Annual Assembly,
2022-07-17
- 2022-07-22.
More information
-
C. Schneider-Bröskamp, M. Silmbroth, T. Klein:
"Microstructure and mechanical properties of wire arc additive manufactured aluminum AA2024";
Talk: IIW Intermediate Meeting 2022, IX-NF-38-2022,
2022-03-14
- 2022-03-18.
-
P. Schulz, H. Kaufmann:
"Fabrication of Carbon Fibre Reinforced Al-Inserts for Local Reinforcement of Automotive Components";
Talk: ISATA 99,
Wien;
1999-06-14
- 1999-06-19.
-
P. Schulz, H. Kaufmann, H. Capel:
"Mechanical Properties of Carbon Fibre - Reinforced Al and Mg under various manufacturing conditions";
Talk: EUROMAT 99,
München;
1999-09-27
- 1999-09-30.
-
P. Sherstnev, P. Lang, E. Kozeschnik:
"Treatment of simultaneous deformation and solid-state precipitation in thermokinetic calculations";
Talk: ECCOMAS 2012,
Wien;
2012-09-10
- 2012-09-14.
-
M. Silmbroth, N. Enzinger, C. Schneider-Bröskamp, A. Arnoldt, T. Klein:
"Characterisation of modifications on cold-formed AA2024 sheet metals";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
-
M. Silmbroth, C. Schneider-Bröskamp, T. Klein, N. Enzinger:
"Evaluation of Wire Arc Additive Manufacturing (WAAM) on cold-formed AA2024 substrates";
Talk: MSE 2022,
2022-09-27
- 2022-09-29.
More information
-
C. Simson, A. Großalber, M. Zink, T. Klein:
"Sustainable Nanostructured Eutectic Casting Alloys";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
More information
-
N. Sotirov, M. Kumar, P. Simon, C. Chimani, R. Prillhofer:
"Study of forming strategies for ultrahigh-strength aluminium panels in the semi-hot (warm) forming temperature range";
Talk: Forming in Car Body Engineering,
Bad Nauheim;
2012-09-26
- 2012-09-27.
-
N. Sotirov, P. Oberhauser et al.:
"Performance of high strength AlZnMg(Cu) Aluminium alloys after W-temper and Warm forming";
Talk: TTP 2013 Conference,
Graz;
2013-09-19.
-
M. Stampfer, P. Schulz:
"Das K plus-Konzept - aktueller Stand und Ausblick";
Talk: Industrieforum Forschung&Entwicklung,
Wirtschaftskammer OÖ, Linz;
1999-06-10.
-
J. Tändl, K. Anders et al.:
"Investigation of the Al3(Sc, Zr) precipitation behaviour of a novel Al-Mg-Sc-Zr alloy";
Talk: 60. Metallkundliches Jubiläumskolloquium,
Lech am Arlberg;
2015-04-25.
-
S. Ucsnik:
"Auslegung einer Magnesium Radnabe für einen eisenlosen Radnabenmotor";
Talk: Cadfem ANSYS Conference,
Wien;
2012-04-26
- 2012-04-27.
-
S. Ucsnik:
"Große, komplexe Bauteile aus Leichtmetallen - Draht-basierte Additive Fertigung";
Talk: UAR Innovation Network 360°,
Kapfenberg, Online (invited);
2021-06-10.
-
S. Ucsnik:
"Lightweight Components and Simulation Light Metal Technologies Ranshofen";
Talk: 25 Jahre LKR Leichtmetallkompetenzzentrum Ranshofen,
Ranshofen;
2019-09-17.
-
S. Ucsnik:
"Numerische Analyse einer Türrahmen-Klebeverbindung";
Talk: ANSYS Conference & 5th CADFEM Austria Users´Meeting,
Schloß Schönbrunn Wien;
2010-04-22.
-
S. Ucsnik:
"We3D - Wire- & Arc-based additive manufacturing - materials and technologies for 3D metal parts";
Talk: Global Innovation Summit 2021,
Graz, online (invited);
2021-05-18
- 2021-05-20.
-
S. Ucsnik:
"Werkstoff- und Prozessentwicklungen - COMET We3D";
Talk: 15. Werkstofftagung IMAT,
Graz (invited);
2021-11-18.
-
S. Ucsnik:
"Wire-based additive manufacturing mit Leichtmetallen";
Talk: Messe Schweißen 2019,
Linz (invited);
2019-09-10
- 2019-09-12.
-
S. Ucsnik, G. Cespedes-Gonzales:
"Hydraform - Hybrid Draping And Forming Of Metal And Composite Sheet Laminates";
Talk: 2nd International Conference on Lightweight Materials and Engineering Structures,
London;
2017-11-13
- 2017-11-14.
-
S. Ucsnik, R. Gradinger:
"Aluminium alloy development for ADDITIVE MANUFACTURED parts in aviation";
Talk: Photonics 4 Additive Manufactured Products,
FH Joanneum Graz (invited);
2017-12-06.
-
S. Ucsnik, R. Gradinger, M. Hartmann:
"Effiziente Herstellkette für Aluminium-Schweißdraht in Prototypenmengen";
Talk: 19. ÖGS-Workshop - "Fügen von Aluminiumwerkstoffen und Aluminiummischverbindungen",
Wels, Fronius (invited);
2018-03-15.
-
S. Ucsnik, R. Gradinger, M. Hartmann, S. Gneiger:
"Smartes Herstellverfahren von Schweißzusatzmaterial, Smart production of welding filler metal";
Talk: 5. Internationale Automobilkonferenz,
Fronius Sattledt (invited);
2017-05-10
- 2017-05-11.
-
S. Ucsnik, T. Klein:
"Einfluss von Schweißdraht-Qualität auf die Fertigung von Aluminium-Kreuzungsstrukturen per Draht-basierter Additver Fertigung";
Talk: ASMET Fachausschuss Schweißtechnik, May 2021,
Kapfenberg, Online (invited);
2021-05-19.
-
S. Ucsnik, T. Klein, R. Gradinger:
"Wire-based Additive Manufacturing (WAM) Neuartige Methode zur Fertigung großer Metallbauteilen per AM";
Talk: ACStyria Leichtbautag 2022,
2022-03-30.
-
S. Ucsnik, M. Krumm, S. Reisinger, S. Kasperl:
"Bestimmung des Schädigungsverlaufes einer zugbelasteten hybriden Metall-FVK-Verbindung mittels Computertomographie";
Talk: Fachtagung "Industrielle Computertomographie" - Zerstörungsfreie Bauteilprüfung, 3D-Materialcharakterisierung und Geometriebestimmung,
FH Wels;
2010-09-27
- 2010-09-29.
-
S. Ucsnik, M. Schnall, A. Birgmann:
"Load transfer behaviour of ultra-light-weight CFRP-metal struts under elevated and cryogenic working temperatures";
Talk: EUROMAT 2021,
Online;
2021-11-13
- 2021-11-17.
-
P. Uggowitzer, J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, J. Reiter, B. Mingler, S. Pogatscher, J. Löffler:
"Hochfeste niedriglegierte (HSLA) Magnesiumlegierungen";
Keynote Lecture: 8. Ranshofener Leichtmetalltage,
Ranshofen / Geinberg (invited);
2014-11-04
- 2014-11-06.
-
M. Unger, M. Schnall, C. Schneider-Bröskamp:
"Investigation of welding process gases for wire arc additive manufacturing of AL5183";
Poster: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
More information
-
T. Waltenberger:
"Strukturbauteile- werkstoff- und prozesstechnische Betrachtungen";
Talk: AC Branchenfokus,
Ranshofen;
2009-03-03.
-
R. Wörgötter-Plunger, I. Smid, J. Linke, M. Röding, M. Scheerer, J. Goebbels, B. Illerhaus, A. Kottar, B. Kriszt, M. Merola, G. Vieider, L. Plöchl:
"Recent Advances in Non-Desctructive Inspection and Testing of Water Cooled, Carbon Armoured Components";
Talk: 8th International Workshop on Carbon MaterialsJ,
Jülich, Deutschland;
1998-09-01
- 1998-09-30.
-
C. Zauner, P. Moser, S. Frank:
"CO2-neutrale Alternativen zu Erdgas für die Alumiumverarbeitung";
Talk: 12. Ranshofener Leichtmetalltage,
2022-10-06
- 2022-10-07.
More information
-
C. Zauner, P. Moser, S. Frank, L. Kiesling, G. Drexler-Schmid:
"Energy efficiency and decarbonization in industrial high temperature processes";
Talk: EUREC - College of Members 65 Brussels,
2022-12-14
- 2022-12-15.
More information
Lectures
-
S. Bozorgi:
"Metallkundliche Vorgänge bei der Leichtmetall Halbzeugerstellung";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2018-03-01
- 2018-12-31.
-
S. Bozorgi:
"Metallkundliche Vorgänge bei der Leichtmetall Halbzeugerstellung";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2019-01-01
- 2019-12-30.
-
S. Bozorgi:
"Metallkundliche Vorgänge bei der Leichtmetall-Halbzeugherstellung";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2015-03-01
- 2015-06-30.
-
S. Frank:
"Gießen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2021-10-01
- 2022-09-30.
-
S. Frank:
"Gießen";
Lecture: Upper Austria University of Applied Sciences,
2022-10-01
- 2023-01-31.
-
S. Frank:
"Gießereitechnik";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2021-10-01
- 2022-01-31.
-
S. Frank:
"Gießtechnik";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2021-10-01.
-
R. Gradinger:
"Werkstofftechnik";
Lecture: academia nova GmbH,
Schwechat;
2011-10-01
- 2012-01-31.
-
R. Gradinger:
"Werkstofftechnik I";
Lecture: academia nova GmbH,
Schwechat;
2012-10-01
- 2012-12-31.
-
R. Gradinger:
"Werkstofftechnik I";
Lecture: academia nova GmbH,
Schwechat;
2013-10-01
- 2013-12-31.
-
R. Gradinger:
"Werkstofftechnik II";
Lecture: academia nova GmbH,
Schwechat;
2012-03-01
- 2012-06-30.
-
A. Kraly:
"Gießen - Masterstudiengang Entwicklungsingenieurin Metall- und Kunststofftechnik";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2017-10-01
- 2018-01-31.
-
A. Kraly:
"Herstellung und Metallurgie von Leichtmetallen - Masterstudiengang Entwicklungsingenieurin Metall- und Kunststofftechnik";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2017-10-01
- 2018-01-31.
-
A. Kraly:
"Nichteisenmetalle - Masterstudiengang Entwicklungsingenieurin Metall- und Kunststofftechnik";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2017-10-01
- 2018-01-31.
-
R. Kretz:
""Gießen" (Leichtmetalle) - GIE5IL - Studiengang Entwicklungsingenieur/in Metall-und Kunststofftechnik (MKT)";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2016-01-01
- 2016-12-31.
-
R. Kretz:
"Gießen Leichtmetalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2010-10-01
- 2011-02-28.
-
R. Kretz:
"Gießen Leichtmetalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2011-10-01
- 2012-01-31.
-
R. Kretz:
"Gießen Leichtmetalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2012-10-01
- 2012-12-31.
-
R. Kretz:
"Gießen Leichtmetalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2013-10-01
- 2013-12-31.
-
R. Kretz:
"Gießen Leichtmetalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2014-10-01
- 2014-12-31.
-
R. Kretz:
"Gießen Leichtmetalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2015-10-01
- 2015-12-31.
-
R. Kretz:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2011-10-01
- 2012-01-31.
-
R. Kretz:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2012-10-01
- 2012-12-31.
-
R. Kretz:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2013-10-01
- 2013-12-31.
-
R. Kretz:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2014-10-01
- 2014-12-31.
-
R. Kretz:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2015-10-01
- 2015-12-31.
-
R. Kretz:
"Herstellung und Metallurgie von Leichtmetallen - MHL1 - Studiengang Entwicklungsingenieur/in Metall-und Kunststofftechnik (MKT)";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2016-10-01
- 2016-12-31.
-
R. Kretz:
"Neue Werkstoffe und Fertigungstechnologien Leichtmetalle";
Lecture: Automotive Cluster - OÖ Wirtschaftsagentur GmbH,
Linz;
2011-06-29
- 2011-06-30.
-
J. Österreicher:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2021-10-01.
-
J. Österreicher:
"Herstellung und Metallurgie von Leichtmetallen";
Lecture: Upper Austria University of Applied Sciences,
2022-10-01
- 2023-01-31.
-
C. Schlögl:
"NE-Metalle";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2021-10-01
- 2022-09-30.
-
C. Schlögl:
"Nichteisenmetalle";
Lecture: Upper Austria University of Applied Sciences,
2022-10-01
- 2023-01-31.
-
P. Sherstnev:
"Metallkundliche Vorgänge bei der Leichtmetall-Halbzeugherstellung";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2013-03-01
- 2013-06-30.
-
P. Sherstnev:
"Metallkundliche Vorgänge bei der Leichtmetall-Halbzeugherstellung";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2014-03-01
- 2014-06-30.
-
S. Ucsnik:
"An innovative, hybrid composite to metal joining solution";
Lecture: Università degli Studi di Palermo,
Sizilien/Italien;
2010-10-31
- 2010-11-05.
-
S. Ucsnik:
"Bionik";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2021-01-01
- 2022-01-31.
-
S. Ucsnik:
"Bionik und ausgewählte Beispiele des Leichtbaus";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2020-11-01
- 2020-12-31.
-
S. Ucsnik:
"Bionik und ausgewählte Beispiele des Leichtbaus - BIO5VO, WS19/20";
Lecture: Upper Austria University of Applied Sciences,
Wels;
2019-11-01
- 2020-01-31.
Doctor's Theses (authored and supervised)
-
W. Fragner:
"Investigation of the Interface Reaction of Al and Binary Al-alloys on Mild Steel Substrates for Al Compound Casting";
Supervisor, Reviewer: P. Uggowitzer, H. Antrekowitsch;
Swiss Federal Institute of Technology Zurich,
2012;
oral examination: 2012-07-06.
-
D. Horwatitsch:
"Entwicklung eines Reibmodells für hohe Temperaturen und hohe Umformgrade";
Supervisor, Reviewer: F. Franek, K. Steinhoff;
University of Stuttgart,
2012;
oral examination: 2012-12-19.
-
J. Kronsteiner:
"Advanced numerical methods and mesh manipulation strategies for large deformation processes";
Supervisor, Reviewer: K. Zeman, H. Böhm;
Johannes Kepler University Linz,
2020;
oral examination: 2020-01-29.
-
J. Nietsch:
"Charakterisierung von Wärmeübergängen: Stationär ermittelte Wärmeübergangskoeffizienten in der umformtechnischen Prozesskette";
Supervisor, Reviewer: G. Hirt, H. Pfeifer;
RWTH Aachen Universität,
2022.
-
J. Österreicher:
"Characterization of Al-Mg-Si alloys for automotive safety parts";
Supervisor, Reviewer: N. Hüsing, P. Uggowitzer;
Paris Lodron University of Salzburg,
2018;
oral examination: 2018-04-23.
-
M. Saeedipour:
"Multiscale modelling of the primary breakup of liquid jets";
Supervisor, Reviewer: S. Schneiderbauer, H. Steiner, S. Bozorgi, A. Horr;
Johannes Kepler University Linz,
2017;
oral examination: 2017-04-26.
-
S. Ucsnik:
"Development, Experimental and Numerical Investigations of a Novel Metal to Composite Joint Technology";
Supervisor, Reviewer: D. Pahr, G. Pinter;
Vienna University of Technology,
2013;
oral examination: 2013-09-16.
-
M. Vetr:
"Beiträge zur Beurteilung der Formbarkeit von Ziehteilen";
Supervisor, Reviewer: K.U. Schröder, M. Schagerl, Th. Waltenberger;
Johannes Kepler University Linz,
2014.
Diploma and Master Theses (authored and supervised)
-
D. Altenhofer:
"Untersuchung der Mikrostruktur, der mechanischen Eigenschaften und der Korrosionsbeständigkeit von AZ31 Legierungen modifiziert mit Indium (In), Gallium (Ga) und Praseodym (Pr)";
Supervisor: R. Kretz, S. Frank, S. Gneiger;
Upper Austria University of Applied Sciences,
2019;
final examination: 2019-09-19.
-
C. Angermeier:
"Untersuchungen des Energieabsorptionsvermögens vonAl-Si-Gusswerkstoffen unter Berücksichtigung der Legierungselemente Mangan und Eisen";
Supervisor: K. Anders;
Landshut University of Applied Sciences,
2012.
-
A. Arnoldt:
"Homogenisierung von Al-Zn-Mg-(Zr)-Legierungen";
Supervisor: W. Reimers;
Technical University of Berlin,
2018;
final examination: 2018-04-11.
-
D. Blacher:
"Physical Shape Optimisation of Channels and Pipes to Improve Fluid Flow";
Supervisor: C. Eisenmenger-Sittner;
Vienna University of Technology,
2021;
final examination: 2021-06-23.
-
S. Brötz:
"Untersuchung zur Verbesserung des Crashverhaltens eines 2-Kammer-Profils";
Supervisor: M. Krommer;
Vienna University of Technology,
2017;
final examination: 2017-05-18.
More information
-
S. Culic:
"Optimierung von Al-Mg-Si Strangpresslegierung für Sicherheitsanwendungen in der Automobilindustrie";
Supervisor: J. Österreicher, C. Edtmaier, A. Schiffl;
Vienna University of Technology,
2021;
final examination: 2021-03-05.
-
J. Domitner:
"Untersuchung des Energieabsorptionsvermögens ausgewählter Al-Si-Mg-Gusslegierungen zur Herstellung crashbeanspruchter Automobilbauteile";
Supervisor: P. Schumacher, S. Bozorgi;
University of Leoben,
2014;
final examination: 2014-03-31.
-
N. Erdem:
"Identification and Validation of Effective Stress-Strain Data Over A Large Range of Strain for Metal Forming Simulation";
Supervisor: M. Hartmann, S. Hoque;
TU Dortmund University,
2021;
final examination: 2021-04-07.
-
S. Ertl:
"Simulating the change of magnetic hysteresis due to the cut of nonoriented electrical steel sheet";
Supervisor: D. Suess, D. Horwatitsch, R. Wöhrnschimmel;
Vienna University of Technology,
2013;
final examination: 2013.
More information
-
S. Frank:
"Charakterisierung des Einflusses ausgewählter Legierungselemente auf die mechanischen Kennwerte von brandbeständigen Magnesium-Legierungen";
Supervisor: R. Kretz;
Upper Austria University of Applied Sciences,
2017;
final examination: 2017-09-22.
-
V. Gimenez Fernandez:
"Optimization of the Gas pressure infiltration process for Aluminium Matrix Composites manufacturing";
Supervisor: G. Ubertalli;
Polytechnic University of Turin,
2018;
final examination: 2018-04-01.
-
S. Gneiger:
"Untersuchung des Einflusses ausgewählter Legierungselemente auf die Eigenschaften von thixotrop verarbeitbaren Magnesiumlegierungen";
Supervisor: A Betz, R. Kretz;
Upper Austria University of Applied Sciences,
2014.
-
F. Grabner:
"Methodenaufbau zur Beschreibung eines nichtquadratischen Fließortes";
Supervisor: M. Steinbatz;
Upper Austria University of Applied Sciences,
2011;
final examination: 2011-09-22.
More information
-
A. Großalber:
"Einbringen von Partikeln in Mg-Legierungen mittels kontinuierlichem Extrusionsverfahren";
Supervisor: R. Kretz;
Upper Austria University of Applied Sciences,
2016;
final examination: 2016-09-10.
-
I. Gudeljevic:
"Brennervergleichsstudien des Wire-based additive manufacturing - Prozesses an Al4,5MgMn- und AlZnMgCu-Legierungen";
Upper Austria University of Applied Sciences,
2021;
final examination: 2021-07-09.
-
T. Hametner:
"Entwicklung von Magnesiumknetlegierungen für den Strangpressprozess";
Supervisor: S. Bozorgi, R. Kretz;
Upper Austria University of Applied Sciences,
2015;
final examination: 2015-09-22.
-
F. Hartl:
"Stochastic calibration of a failure model for Aluminium cast materials";
Supervisor: C. Mühlstätter, S. Ucsnik;
Landshut University of Applied Sciences,
2019;
final examination: 2019-10-14.
-
F. Haunreiter:
"Numerisch basierte Schweißleistungsvorhersage für den WAM-Prozess";
Supervisor: W. Krach;
University of Applied Sciences Technikum Wien,
2021;
final examination: 2021-09-20.
-
S. Kadam:
"Numerial and experimental assessment of point joining techniques by using LS-Dyna explicit finite element code";
Supervisor: G. Kirov, J. Blum;
University of Duisburg-Essen,
2014;
final examination: 2014.
-
G. Kirov:
"Kornfeinung von Magnesium-Aluminium-Legierungen";
Supervisor: A. Schiffl, D. Heim;
Upper Austria University of Applied Sciences,
2007;
final examination: 2007-09.
-
G. Kirov:
"Numerische Betrachtungsmethoden für strukturell geklebte Bauteile";
Supervisor: Z. Khalil;
Upper Austria University of Applied Sciences,
2013.
-
J. Kronsteiner:
"Parameter Identification by Optimization";
Supervisor: T. Reiter, S. Ucsnik;
Upper Austria University of Applied Sciences,
2013;
final examination: 2013-06-27.
-
F. Magner:
"Legierungsentwicklung Schweißdraht EN-AW6082";
Supervisor: T. Klein, C. Schneider-Bröskamp;
FH Oöberösterreich,
2022;
final examination: 2022-12-07.
-
C. Mühlstätter:
"Versagensmodellierung von Aluminium-Gusswerkstoffen";
Supervisor: M. Hartmann, T. Reiter;
Upper Austria University of Applied Sciences,
2015;
final examination: 2015-09-22.
-
N. Papenberg:
"Bruchmechanismen in AlSiCu Gusslegierungen";
Supervisor: S. Bozorgi, R. Pippan;
Austrian Academy of Sciences,
2015;
final examination: 2015-09-30.
-
S. Patil:
"Modelling of texture evolution during deformation of aluminium alloys using the VPSC method";
Supervisor: J. Domitner;
Graz University of Technology,
2022;
final examination: 2022-04-24.
-
B. Pruckner:
"Grain growth simulation in aluminum casting processes";
Supervisor: S. Jäger, C. Eisenmenger-Sittner;
Vienna University of Technology,
2020;
final examination: 2020-08-05.
-
A. Rauscher:
"Realisation of continuous fibre reinforced aluminium MMC with advanced geometries and layups";
Supervisor: S. Ucsnik, M. Hinterhölzl;
Upper Austria University of Applied Sciences,
2022;
final examination: 2022-09-28.
More information
-
L. Reiter:
"Pfadplanungsstrategien für mechanisierte drahtbasierte additive Fertigung von rotationssymmetrischen Aluminiumbauteilen";
Supervisor: T. Klein, S. Bozorgi;
Upper Austria University of Applied Sciences,
2021;
final examination: 2021-09-23.
-
J. Scharinger:
"Charakterisierung einer Aluminiumgusslegierung mittels miniaturisierter Probengeometrien für LS-DYNA";
Supervisor: S. Ucsnik, M. Schagerl;
Johannes Kepler University Linz,
2017;
final examination: 2017-02.
-
P. Schuster:
"Characterisation and comparison of process chains for the production of automotive structural parts from EN AW-7xxx aluminium sheets";
Supervisor: C. Sommitsch, G. Kirov;
Graz University of Technology,
2017;
final examination: 2018-01-23.
-
M. Silmbroth:
"Nachhaltige Entwicklung und Anwendung von sekundären AlZnMg(Cu)-Druckgusslegierungen";
Supervisor: S. Bozorgi, A. Kraly;
Upper Austria University of Applied Sciences,
2018;
final examination: 2018-11-16.
-
S. Staggl:
"Energieeffiziente Wärmebehandlung der Gusslegierungen AlSi7Mg0,3 und AlSi9Cu3(Fe)";
Supervisor: P. Schumacher, S. Bozorgi;
University of Leoben,
2013;
final examination: 2013-11-30.
-
R. Thakkar:
"Ball head pin reinforced composite to composite single lap shear joint - Modelling, evaluation and parameter study";
Supervisor: S. Ucsnik;
University of Duisburg-Essen,
2013.
-
E. Theil:
"Clustering technique for efficient coupled simulations of grain structure and precipitation kinetics";
Supervisor: E. Kabliman, J. Kronsteiner, K. Held;
Vienna University of Technology,
2022;
final examination: 2022-01-14.
-
A. Thomas:
"Wire and Arc Additive Manufacturing - Feasibility study on crash-relevent structure for automotive applications";
Supervisor: T. Klein, F. Leonardi, K. Radlmayr;
Unknown,
2022;
final examination: 2022-01-28.
Bachelor Theses (authored and supervised)
-
S. Frank:
"Magnesiumlegierungen in niederdruckunterstützten Gießverfahren";
Supervisor: C. Angermeier, R. Kretz;
Upper Austria University of Applied Sciences,
2015.
-
S. Gneiger:
"Konzept für den Strangguss endabmessungsnaher Formate in Hot-Top Mehrfachkokillen";
Supervisor: R. Kretz;
Upper Austria University of Applied Sciences,
2012.
-
F. Grabner:
"Methodenentwicklung & numerische Optimierung von Spaceframe Strukturen für alternative Fahrzeugkonzepte";
Supervisor: G. Kirov, M. Steinbatz;
Upper Austria University of Applied Sciences,
2009.
-
D. Inschlag:
"Hybrid Jointing";
Supervisor: S. Ucsnik, D. Pavelyeva;
University of Applied Sciences Technikum Wien,
2012.
-
S. Jäger:
"Numerische und experimentelle Untersuchung von Al-Strukturblechen";
Supervisor: T. Reiter, M. Hartmann;
Upper Austria University of Applied Sciences,
2013.
-
T. Lackermeier:
"Cyclic thermal testing and simulation of CFRP rods with a coefficient of thermal expansion close to zero";
Supervisor: S. Ucsnik, M. Thor;
Fachhochschule Wels, Institut für Leichtbau und Compsite-Werkstoffe,
2020.
-
C. Maurer:
"State of the art review of simulation software for metal additive manufacturing";
Supervisor: S. Scheiblhofer, S. Ucsnik, I. Nemec;
University of Applied Sciences Technikum Wien,
2018.
-
A. Rauscher:
"Untersuchung eines CFK-Metallblech-Hutprofiles unter Stauch/Crashlast samt Variation von Materialparametern per numerischer Simulation";
Supervisor: S. Hoque, M. Thor;
Fachhochschule Wels, Institut für Leichtbau und Compsite-Werkstoffe,
2020.
-
M. Roschitz:
"Investigation of Non Linear Dynamic Methods for a Vehicle Crash Structure Optimization";
Supervisor: T. Reiter;
Upper Austria University of Applied Sciences,
2011.
More information
-
G. Steidl:
"Finite-Elemente Modellierung des Pressabschreckens von Aluminium";
Supervisor: G. Falkinger, A. Huskic;
FH Wels,,
2014.
-
C. Weinberger:
"Effiziente Simulation und wirklichkeitsgetreue Nachbildung eines Stanznietprozesses mit LS-Dyna";
Supervisor: T. Reiter, G. Kirov;
Upper Austria University of Applied Sciences,
2015.
