This publication list has been generated automatically from the publication data of the Center "Low-Emission Transport". Please invoke the page "Publications of the Center" directly for more complex searches and queries, or use the global search function of the Publication Database of the AIT Austrian Institute of Technology!

Publication list for members of
Low-Emission Transport
as authors or essentially involved persons

52 records (2010 - 2023)

The complete list of publications of the Center "Low-Emission Transport" is available from the publication database beginning with the publication year 2017. The database may but need not necessarily contain publications dated earlier than 2017.

1. Authors: Christian Chimani, LET; Peter Uggowitzer, Swiss Federal Instit
   
   C. Chimani, P. Uggowitzer et al. (ed.):
   "7. Ranshofener Leichtmetalltage, Energieeffiziente Mobilität, Chancen der Werkstoff- und Prozesstechnologie";
   LKR-Verlag, Ranshofen, 2012, ISBN: 978-3-902092-07-6; 248 pages.
   
   

1. Authors: Andreas Hula, TIT; Florian Fürnsinn, LET; Klemens Schwieger, TIT; Peter Saleh, TIT; Manfred Neumann, Vienna University of; Horst Ecker, Vienna University of
   
   A. Hula, F. Fürnsinn, K. Schwieger, P. Saleh, M. Neumann, H. Ecker:
   "Deriving a Joint Risk Estimate from Dynamic Data Collected at Motorcycle Rides";
   Accident Analysis and Prevention, 159 (2021).
   
   
2. Authors: Manoj Kumar, LKR; Nikolay Sotirov, LKR; Christian Chimani, LET
   
   M. Kumar, N. Sotirov, C. Chimani:
   "Investigations on warm forming of AW-7020-T6 alloy sheet";
   Journal of Materials Processing Technology, 1 (2014).
   
   
3. Authors: S. Schneiderbauer, JKU; Christian Chimani, LET
   
   S. Schneiderbauer, C. Chimani:
   "Analytische, numerische und experimentelle Untersuchungen des Druckguss-Prozesses";
   Lightweight Design, 10 (2013), 60 - 65.
   
   

1. Authors: Andreas Betz, LKR; Hubert Grün-Lutterotti, LET
   
   A Betz, H. Grün-Lutterotti et al.:
   "Center crack detection during continuous casting of aluminium by laser ultrasonic measurements";
   Talk: SPIE Sensing Technology and Applications 2014, Baltimore; 2014-05-05 - 2014-05-09; in: "Proceedings of the SPIE", SPIE, (2014).
   
   
2. Authors: Salar Bozorgi, LKR; Kevin Anders, LKR; Christoph Angermeier, LKR; Christian Chimani, LET
   Other person involved: Salar Bozorgi, LKR
   
   S. Bozorgi, K. Anders, C. Angermeier, C. Chimani:
   "The effect of wall thickness and heat treatment on impact energy absorption of AlSi10 casting alloys";
   Talk: International Conference on Aluminium Application, Trondheim; 2014-06-15 - 2014-06-19; in: "Materials Science Forum", S. Bozorgi (ed.); Materials Science Forum, 794 - 796 (2014), ISSN: 1662-9752.
   
   
3. Authors: Christian Chimani, LET; Richard Kretz, LKR
   Other person involved: Christian Chimani, LET
   
   C. Chimani, R. Kretz et al.:
   "Investigations on microstructure effect of changing fluid flow characteristics in high pressure die casting";
   Talk: Metallographie 2013, Stara Lesna; 2013-04-24 - 2013-04-26; in: "Materials Science Forum", C. Chimani (ed.); Materials Science Forum, 2013 (2013).
   
   
4. Authors: Christian Chimani, LET; Richard Kretz, LKR; S. Schneiderbauer, JKU; S. Pirker, JKU
   
   C. Chimani, R. Kretz, S. Schneiderbauer, S. Pirker:
   "Studies on Flow Characteristics at High-Pressure Die-Casting";
   Talk: ICASP 3; The 3rd International Conference on Advances in Solidification Processes, Aachen; 2011-06-07 - 2011-06-10; in: "ICASP 3 -... the 3rd International Conference on Advances in Solidification Processes", (2011).
   
   More information
   
   
5. Authors: Christian Chimani, LET; Richard Kretz, LKR; S. Schneiderbauer, JKU; Stefan Puttinger; S. Pirker, JKU
   
   C. Chimani, R. Kretz, S. Schneiderbauer, S. Puttinger, S. Pirker:
   "Studies on Flow Characteristics at High-Pressure Die-Casting";
   Talk: TMS 2012 141 Annual Meeting & Exhibition, Orlando; 2012-03-11 - 2012-03-15; in: "Light Metals 2012", Light Metals 2012, (2012), 443 - 447.
   
   
6. Authors: Christian Chimani, LET; Pavel Sherstnev, LKR; Daniel Pöschmann, LKR; Nikolay Sotirov, LKR; T. Waltenberger, LKR
   
   C. Chimani, P. Sherstnev, D. Pöschmann, N. Sotirov, T. Waltenberger:
   "Prozessentwicklung und Produktcharakterisierung bei hochfesten Aluminiumlegierungen / Process Design and Product Characterization for High Strength Aluminium Alloys";
   Keynote Lecture: Neuere Entwicklungen in der Blechumformung, Fellbach; 2011-05-17 - 2011-05-18; in: "Neuere Entwicklungen in der Massivumformung / New Developments in Forging Technology", (2011).
   
   More information
   
   
7. Authors: Christian Chimani, LET; M. Vetr, JKU
   
   C. Chimani, M. Vetr et al.:
   "Limit drawing ratio applied to large geometries";
   Talk: International Conference on Metal Structures, Design, Fabrication and Economy on Metal Structures, Miscolk; 2013-04-24 - 2013-04-26; in: "International Conference on Metal Structures, Design, Fabrication and Economy on Metal Structures", 1 (2013), # - ?.
   
   
8. Authors: Florian Grabner, LKR; Belinda Gruber; Carina Schlögl, LKR; Christian Chimani, LET
   
   F. Grabner, B. Gruber, C. Schlögl, C. Chimani:
   "Cryogenic Sheet Metal Forming - An Overview";
   Talk: Thermec'2018, Paris, Frankreich (invited); 2018-07-09 - 2018-07-13; in: "Materials Science Forum", 941 (2018), ISSN: 1662-9752; 1397 - 1403.
   
   More information
   
   
9. Authors: Amir Horr, LKR; Richard Kretz, LKR; Andreas Betz, LKR; Christian Chimani, LET
   
   A. Horr, R. Kretz, A Betz, C. Chimani:
   "Multi physical process simulation of continuous casting - full interactive simulation";
   Talk: ECCC 8th Europeas Continuous Casting Conference 2014, Graz; 2014-06-23 - 2014-06-26; in: "ECCC 8th European Continuous Casting Conference 2014", ASMET, (2014).
   
   
10. Authors: Manoj Kumar, LKR; Salar Bozorgi, LKR; Iris Baumgartner, LKR; Christian Chimani, LET
    Other person involved: Manoj Kumar, LKR
    
    M. Kumar, S. Bozorgi, I. Baumgartner, C. Chimani:
    "High temperature tensile deformation of as-cast AA6061 and AA7005 alloys";
    Talk: Euro LightMAT, Bremen; 2013-09-03 - 2013-09-15; in: "Euro LightMAT", M. Kumar (ed.); (2013).
    
    
11. Authors: Manoj Kumar, LKR; Nikolay Sotirov, LKR; Christian Chimani, LET
    Other person involved: Manoj Kumar, LKR
    
    M. Kumar, N. Sotirov, C. Chimani:
    "Effect of warm forming onprecipitation kinetics and mechanical properties of peak-aged 7020 aluminium sheet";
    Talk: IDDRG 2012, Mumbai; 2012-11-25 - 2012-11-29; in: "IDDRG 2012", M. Kumar (ed.); (2012).
    
    
12. Authors: Manoj Kumar, LKR; Nikolay Sotirov, LKR; Christian Chimani, LET; Paul Oberhauser
    Other person involved: Manoj Kumar, LKR
    
    M. Kumar, N. Sotirov, C. Chimani, P. Oberhauser et al.:
    "Feasibility of hot stamping of high strength Al-Zn-Mg alloy sheet";
    Talk: International Conference on Aluminium Application, Trondheim; 2014-06-15 - 2014-06-19; in: "Materials Science Forum", M. Kumar (ed.); Materials Science Forum, 794 - 796 (2014), ISSN: 1662-9752.
    
    
13. Authors: Nikolay Sotirov, LKR; Peter Simon; Christian Chimani, LET; Dirk Uffelmann; Carsten Melzer
    
    N. Sotirov, P. Simon, C. Chimani, D. Uffelmann, C. Melzer:
    "Warm Deep Drawability of Peak-Aged 7075 Aluminium Sheet Alloy";
    Talk: 15th ESAFORM CONFERENCE, Erlangen (Deutschland); 2012-03-14 - 2012-03-16; in: "Warm Deep Drawability of Peak-Aged 7075 Aluminium Sheet Alloy", Key Engineering Material, 504-506 / Schweiz (2012), ISSN: 1013-9826; 955 - 960.
    
    More information
    
    

1. Author: Christian Chimani, LET
   
   C. Chimani:
   "AIT Mobility Department";
   Keynote Lecture: DOW Chemicals, Horgen, Schweiz (invited); 2016-12-05.
   
   
2. Author: Christian Chimani, LET
   
   C. Chimani:
   "E-Mobility - Ein Beitrag zur Dekarbonisierung des Transports";
   Talk: Einweihungsfeier neue Produktionshalle 4.0 und Strangpresse P41, Ranshofen (invited); 2019-05-10.
   
   
3. Author: Christian Chimani, LET
   
   C. Chimani:
   "Leichtmetallentwicklung für neue Leichtigkeit";
   Talk: Grenzüberschreitendes Kooperationsforum Leichtbau, Linz; 2011-11-30.
   
   
4. Author: Christian Chimani, LET
   
   C. Chimani:
   "Materials Moving Mobility";
   Keynote Lecture: Miba R&D Convention, Steyrmühl (invited); 2016-10-21.
   
   
5. Author: Christian Chimani, LET
   
   C. Chimani:
   "Stranggießen und Strangpressen";
   Talk: INNOVMAT | academy workshop: "Magnesium", Wiener Neustadt (invited); 2012-01-26.
   
   
6. Author: Christian Chimani, LET
   
   C. Chimani:
   "Strength Calculation of a formed and heat-treated 6016 sheet by means of simulation";
   Talk: Metallographie 2010, Kosice; 2010-04-27 - 2010-04-29.
   
   
7. Authors: Christian Chimani, LET; Matthias Hartmann, LKR; Z. Khalil, LKR; Peter Simon
   
   C. Chimani, M. Hartmann, Z. Khalil, P. Simon:
   "Light Weight Design of AlMg Hybrid Space Frames for Urban E-Vehicles";
   Keynote Lecture: 6th A3PS Conference "ECO-MOBILITY 2011", Wien; 2011-11-15 - 2011-11-16.
   
   
8. Authors: Simon Frank, LKR; Christian Chimani, LET; Thilo Röth; Mattina Luigi; K. Radlmayr; Klaus Koglin
   
   S. Frank, C. Chimani, T. Röth, M. Luigi, K. Radlmayr, K. Koglin:
   "MegaCasting - Intelligent Sustainable Lightweight Design? A Dispute between experts.";
   Talk: Automotive cycle - car body parts, 2022-09-27 - 2022-09-29.
   
   
9. Authors: Simon Frank, LKR; Stefan Gneiger, LKR; Ernst Neunteufl; Martin Schnall, LKR; Alois Birgmann, LKR; Stephan Ucsnik, LKR; Rudolf Gradinger, LKR; Christian Chimani, LET
   
   S. Frank, S. Gneiger, E. Neunteufl, M. Schnall, A. Birgmann, S. Ucsnik, R. Gradinger, C. Chimani:
   "Wire Based Additive Manufacturing of Al- and Mg-alloys";
   Keynote Lecture: 9th International Light Metals Technology Conference, Shanghai (invited); 2019-10-15 - 2019-10-18.
   
   
10. Authors: Simon Frank, LKR; Stefan Gneiger, LKR; Ernst Neunteufl; Martin Schnall, LKR; Alois Birgmann, LKR; Stephan Ucsnik, LKR; Rudolf Gradinger, LKR; Christian Chimani, LET
    
    S. Frank, S. Gneiger, E. Neunteufl, M. Schnall, A. Birgmann, S. Ucsnik, R. Gradinger, C. Chimani:
    "Wire Based Additive Manufacturing of Al- and Mg-alloys";
    Talk: Eco-Mobility 2019 - 14th International A3PS Conference, Wien; 2019-11-14 - 2019-11-15.
    
    
11. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "What can NDT do for you?";
    Keynote Lecture: LU2016 - Laserultraschall-Konferenz, Linz (invited); 2016-07-04 - 2016-07-08.
    
    
12. Authors: Hubert Grün-Lutterotti, LET; Florian Grabner, LKR; Carina Schlögl, LKR
    
    H. Grün-Lutterotti, F. Grabner, C. Schlögl:
    "KryoAlu - Kryogene Umformung von Aluminium-Außenhautbauteilen für automobile Anwendungen";
    Talk: Forum mission.innovation, Wien; 2018-06-13.
    
    
13. Authors: Jürgen Gumpinger, KTM; Christian Chimani, LET; Rudolf Gradinger, LKR
    
    J. Gumpinger, C. Chimani, R. Gradinger:
    "Carbon versus Aluminium: A competition between light weight Materials?";
    Talk: TRA 2014, Paris (invited); 2014-04-14 - 2014-04-17.
    
    
14. Authors: Dirk Holste, HE; Manfred Gruber, AAS; Helmut Leopold, DSS; Christian Chimani, LET
    
    D. Holste, M. Gruber, H. Leopold, C. Chimani:
    "Technology ecosystem of automated driving";
    Keynote Lecture: Feasible Propulsion and Vehicle Technologies versus Political Visions, Wien; 2016-10-17 - 2016-10-18.
    
    
15. Authors: Carina Schlögl, LKR; Christian Chimani, LET
    
    C. Schlögl, C. Chimani:
    "Innovative Lightweight Construction - an important contribution to zero-emission mobility of the future";
    Talk: Eco-Mobility 2021 - 15 Years A3PS, 2021-11-18 - 2021-11-19.
    
    
16. Authors: Nikolay Sotirov, LKR; Manoj Kumar, LKR; Peter Simon; Christian Chimani, LET; Ramona Prillhofer
    
    N. Sotirov, M. Kumar, P. Simon, C. Chimani, R. Prillhofer:
    "Study of forming strategies for ultrahigh-strength aluminium panels in the semi-hot (warm) forming temperature range";
    Talk: Forming in Car Body Engineering, Bad Nauheim; 2012-09-26 - 2012-09-27.
    
    

1. Author: Christian Chimani, LET
   
   C. Chimani:
   "Continuous Casting Teil 1 Ironmaking, Steelmaking, Casting, Rolling";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2010-01-01 - 2010-12-20.
   
   
2. Author: Christian Chimani, LET
   
   C. Chimani:
   "Herstellung und Metallurgie von Leichtmetallen";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2013-10-01 - 2013-12-31.
   
   
3. Author: Christian Chimani, LET
   
   C. Chimani:
   "Metallkundliche Vorgänge bei der Leichtmetall-Halbzeugherstellung";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2012-01-03 - 2012-06-30.
   
   
4. Author: Christian Chimani, LET
   
   C. Chimani:
   "NE-Metalle";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2011-10-01 - 2012-01-31.
   
   
5. Author: Christian Chimani, LET
   
   C. Chimani:
   "NE-Metalle";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2012-10-01 - 2012-12-31.
   
   
6. Author: Christian Chimani, LET
   
   C. Chimani:
   "NE-Metalle";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2014-01-01 - 2014-02-06.
   
   
7. Author: Christian Chimani, LET
   
   C. Chimani:
   "NE-Metalle";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2014-10-17 - 2015-01-30.
   
   
8. Author: Christian Chimani, LET
   
   C. Chimani:
   "NE-Metalle";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2015-11-06 - 2016-02-12.
   
   
9. Author: Hubert Grün-Lutterotti, LET
   
   H. Grün-Lutterotti:
   "Ausgewählte Kapitel der Messtechnik - Masterstudiengang Automatisierungstechnik";
   Lecture: Upper Austria University of Applied Sciences, Wels; 2016-10-01 - 2016-12-31.
   
   
10. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Ausgewählte Kapitel der Messtechnik - Masterstudiengang Automatisierungstechnik";
    Lecture: Upper Austria University of Applied Sciences, Wels; 2017-10-01 - 2018-01-31.
    
    
11. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Green Mobility";
    Lecture: University of Applied Sciences Campus Vienna, 2023-02-01 - 2023-07-31.
    
    
12. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Leichtbau";
    Lecture: University of Applied Sciences Campus Vienna, 2022-02-01 - 2022-07-31.
    
    
13. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Leichtbau - Masterstudiengang "Green Mobility"";
    Lecture: University of Applied Sciences Campus Vienna, Wien; 2017-02-01 - 2017-06-30.
    
    
14. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Leichtbau - Masterstudiengang "Green Mobility"";
    Lecture: University of Applied Sciences Campus Vienna, Wien; 2018-02-01 - 2018-06-30.
    
    
15. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Leichtbau - Masterstudiengang "Green Mobility"";
    Lecture: University of Applied Sciences Campus Vienna, Wien; 2019-02-01 - 2019-07-31.
    
    
16. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Leichtbau - Masterstudiengang "Green Mobility"";
    Lecture: University of Applied Sciences Campus Vienna, Wien; 2020-02-01 - 2020-07-31.
    
    
17. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Medical Diagnosis Systems - Masterstudiengang "Medical Engineering";
    Lecture: Upper Austria University of Applied Sciences, Linz; 2016-10-01 - 2016-12-31.
    
    
18. Author: Hubert Grün-Lutterotti, LET
    
    H. Grün-Lutterotti:
    "Medical Diagnosis Systems - Masterstudiengang "Medical Engineering"";
    Lecture: Upper Austria University of Applied Sciences, Linz; 2017-10-01 - 2018-01-31.
    
    

1. Author: Philipp Stuhlpfarrer
   Other persons involved: Hubert Grün-Lutterotti, LET; Hubert Hirsch
   
   P. Stuhlpfarrer:
   "Optimierung von wissenschaftlichen, technischen Projekt- bzw. Förderanträgen mit Hilfe effizienter Management-Tools";
   Supervisor: H. Grün-Lutterotti, H. Hirsch; KMU Akademie & Management AG, 2021; final examination: 2021-03-05.